DIN 2.4856 Industrial Washers, Inconel 625 Flat Washers, Alloy 625 Washers, UNS N06625 Spring Washers, Inconel Alloy 625 Washers, Inconel 625 Star Washers Manufacturer Suppliers in India.
Victor Steel Corporation is a renowned seller and supplier of Inconel Alloy 625 Washers, which is an enormously alloyed austenitic metallic used for excessive temperature application. This product is the second-maximum extensively used form of metallic and is regularly used to weld on different metallic, the maximum usually produced form of metallic. This product is utilized in furnace parts, conveyor belts & heating factors, warmness exchanger, refinery and chemical processing equipment. The excessive chromium and nickel content material supply this product top notch oxidation resistance in addition to excessive strength at excessive temperature.
Inconel Alloy 625 Split Washer, Nickel Alloy 625 Machine Washer, UNS N06625 Belleville Washers, Inconel 625 Fender Washer, Inconel® Alloy 625 Square Washer, Inconel 625 Ogee Washers, Alloy 625 Lock Washers, Alloy 625 Dome Washers Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For Inconel 625 Washers
- Different Forms of Inconel 625 Washers
- Equivalent Grade Chart Of Inconel 625 Washers
- Chemical Composition Of Inconel 625 Washers
- Mechanical Properties Of Inconel 625 Washers
- Size Chart of Inconel 625 Washers
- Dimensions of Alloy 625 Spring Washer
- Weight Chart Of Inconel Alloy 625 Washers
- Keep Bulk Stock Of Inconel 625 Washers
- Inconel 625 Washers Export to below Mentioned Countries
- Inconel 625 Washers Application Area
Molybdenum content material in this Inconel Alloy WNR 2.4856 Wire Spring Washers is needed within the manufacture of sure prescribed treatments so as to keep away from immoderate steel contamination. Hardness on this product varies in a comparable manner, from quite tender annealed austenitic metallic to extraordinarily tough martensitic material inclusive of that used for razor blades or ball bearings. We are also known as the best stockholder and exporter in all around the globe. Washers are manufactured as per the expectations of the clients. The washers are made of some metal and plastic materials that are used.Upon growing older, the ferrite hardness of this Nickel Alloy 625 Flat Spring Washers expanded as much as a hundred percentages, due to the fact this hardening changed into observed through an important growth within the ductile — brittle transition temperature and a drop within the top shelf energy. This alloy carries molybdenum content, which will increase metal’s corrosion resistance.
Standard Specification For Inconel 625 Washers
| Specification | ASTM B166 / ASME SB166 |
|---|---|
| Size | M02 to M33, Custom Sizes |
| Length | 3 mm to 200 mm |
| Washer | UNF, BSW, BSF, METRIC, UNC, or as required |
| Types | Fender Washer, Ogee Washer, Countersunk Washer, Hex Washers, Dome Washer, Plain / Flat Washer, Split / Lock Washer, Customized Washer, Tooth Lock Washer, Tab Washers, Dock Washer, Dome Tooth Washer, Spring Washers, Square Washer, Hexagonal Washer |
| Standard | DIN 125A, DIN 125B, DIN 127B, DIN 137B, DIN 6797A, DIN 6797J, ISO 7089, DIN 7980, DIN 127 B, IS 2016, ASTM F436M, ASME B18.13, ASME B18.21.1, ASME B18.22.1, ASME B18.23.1 |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
| Surface Coating | Ptfe Coated Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Check Inconel 625 Washers From 0.062 to 12 inch In Diameter, M10 to M36 Alloy 625 Plain Washer, Inconel Alloy 625 Lock Washer Manufacturer India, View Updated Inconel 625 Square Fender Washer & Spring Washers Price List In India.
Different Forms of Inconel 625 Washers
Equivalent Grade Chart Of Inconel 625 Washers
| STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST | OR |
| Inconel 625 | N06625 | 2.4856 | NC22DNB4M | NiCr22Mo9Nb | NCF 625 | NA 21 | ХН75МБТЮ | ЭИ602 |
Chemical Composition Of Inconel 625 Washers
| Grade | C | Mn | Si | S | Al | Ti | Fe | Ni | Cr |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | 0.40 max | 0.40 max | 5.0 max | 58.0 min | 20.0 - 23.0 |
Mechanical Properties Of Inconel 625 Washers
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.4 g/cm3 | 1350 °C (2460 °F) | Psi - 1,35,000 , MPa -930 | Psi - 75,000 , MPa - 517 | 42.5 % |
Size Chart of Inconel 625 Washers
| Size | USS | SAE | ||||
|---|---|---|---|---|---|---|
| Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
|
| #2 | – | – | – | 3/32″ | 1/4″ | 0.020″ |
| #4 | – | – | – | 1/8″ | 5/16″ | 0.032″ |
| #6 | – | – | – | 5/32″ | 3/8″ | 0.049″ |
| #8 | – | – | – | 3/16″ | 7/16″ | 0.049″ |
| #10 | – | – | – | 7/32″ | 1/2″ | 0.049″ |
| #12 | – | – | – | 1/4″ | 9/16″ | 0.065″ |
| 1/4″ | 5/16″ | 0.734″ | 0.065″ | 9/32″ | 5/8″ | 0.065″ |
| 5/16″ | 3/8″ | 7/8″ | 0.083″ | 11/32″ | 11/16″ | 0.065″ |
| 3/8″ | 7/16″ | 1″ | 0.083″ | 13/32″ | 13/16″ | 0.065″ |
| 7/16″ | 1/2″ | 1-1/4″ | 0.083″ | 15/32″ | 15/16″ | 0.065″ |
| 1/2″ | 9/16″ | 1-3/8″ | 0.109″ | 17/32″ | 1-1/16″ | 0.095″ |
| 9/16″ | 5/8″ | 1-15/32″ | 0.109″ | 19/32″ | 1-5/32″ | 0.095″ |
| 5/8″ | 11/16″ | 1-3/4″ | 0.134″ | 21/32″ | 1-5/16″ | 0.095″ |
| 3/4″ | 13/16″ | 2″ | 0.148″ | 13/16″ | 1-15/32″ | 0.134″ |
| 7/8″ | 15/16″ | 2-1/4″ | 0.165″ | 15/16″ | 1-3/4″ | 0.134″ |
| 1″ | 1-1/16″ | 2-1/2″ | 0.165″ | 1-1/16″ | 2″ | 0.134″ |
| 1-1/8″ | 1-1/4″ | 2-3/4″ | 0.165″ | – | – | – |
| 1-1/4″ | 1-3/8″ | 3″ | 0.165″ | – | – | – |
| 1-3/8″ | 1-1/2″ | 3-1/4″ | 0.180″ | – | – | – |
| 1-1/2″ | 1-5/8″ | 3-1/2″ | 0.180″ | – | – | – |
| 1-5/8″ | 1-3/4″ | 3-3/4″ | 0.180″ | – | – | – |
| 1-3/4″ | 1-7/8″ | 4″ | 0.180″ | – | – | – |
| 2″ | 2-1/8″ | 4-1/2″ | 0.213″ | – | – | – |
Dimensions of Alloy 625 Spring Washer
| NOM SIZE | Inner Dia (d) Basic Tol (+) | Outer Dia (d1) Max | WIDTH (b) Basic Tol (+ or -) | THICKNESS (S) Basic Tol (+ or -) | Weight per 1000 in Kgs | |||
| 3 | 3.1 | 0.3 | 6.2 | 1.3 | 0.1 | 0.8 | 0.1 | 0.11 |
| 4 | 4.1 | 0.3 | 7.6 | 1.5 | 0.1 | 0.9 | 0.1 | 0.18 |
| 5 | 5.1 | 0.3 | 9.2 | 1.8 | 0.1 | 1.2 | 0.1 | 0.36 |
| 6 | 6.1 | 0.4 | 11.8 | 2.5 | 0.15 | 1.6 | 0.1 | 0.83 |
| 8 | 8.1 | 0.4 | 14.8 | 3 | 0.15 | 2 | 0.1 | 1.60 |
| 10 | 10.2 | 0.5 | 18.1 | 3.5 | 0.2 | 2.2 | 0.15 | 2.53 |
| 12 | 12.2 | 0.5 | 21.1 | 4 | 0.2 | 2.5 | 0.15 | 3.82 |
| 14 | 14.2 | 0.5 | 24.1 | 4.5 | 0.2 | 3 | 0.15 | 6.01 |
| 16 | 16.2 | 0.8 | 27.4 | 5 | 0.2 | 3.5 | 0.2 | 8.91 |
| 18 | 18.2 | 0.8 | 29.4 | 5 | 0.2 | 3.5 | 0.2 | 9.73 |
| 20 | 20.2 | 1 | 33.6 | 6 | 0.2 | 4 | 0.2 | 15.20 |
| 22 | 22.5 | 1 | 35.9 | 6 | 0.2 | 4 | 0.2 | 16.50 |
| 24 | 24.5 | 1 | 40 | 7 | 0.25 | 5 | 0.2 | 26.20 |
| 27 | 27.5 | 1 | 43 | 7 | 0.25 | 5 | 0.2 | 28.70 |
| 30 | 30.5 | 1.2 | 48.2 | 8 | 0.25 | 6 | 0.2 | 44.30 |
| 33 | 33.5 | 1.2 | 55.2 | 10 | 0.25 | 6 | 0.2 | 63.00 |
| 36 | 36.5 | 1.2 | 58.2 | 10 | 0.25 | 6 | 0.2 | 67.30 |
| 39 | 39.5 | 1.2 | 61.2 | 10 | 0.25 | 6 | 0.2 | 71.70 |
| 42 | 42.5 | 1.2 | 68.2 | 12 | 0.25 | 7 | 0.25 | 111.00 |
| 45 | 45.5 | 1.2 | 71.2 | 12 | 0.25 | 7 | 0.25 | 117.00 |
| 48 | 49 | 1.5 | 75 | 12 | 0.25 | 7 | 0.25 | 123.00 |
| 52 | 53 | 1.5 | 83 | 14 | 0.25 | 8 | 0.25 | 320.00 |
Weight Chart Of Inconel Alloy 625 Washers
| APPROX. WEIGHT IN KGS FOR 100 NOS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE | TAPER | WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
| M-3 | 0.01 | 0.01 | |||||||||
| M-4 | 0.02 | 0.02 | |||||||||
| M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
| M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
| M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
| M-14 | 0.82 | 0.60 | 0.38 | ||||||||
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
| M-18 | 1.27 | 0.97 | 0.66 | ||||||||
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
| M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
| M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
| M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
| M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
| M-52 | 31.90 | 33.00 | 18.20 | ||||||||
| M-56 | 47.90 | 19.30 | |||||||||
| M-60 | 51.60 | 20.30 | |||||||||
| M-64 | 55.40 | 21.80 | |||||||||
| M-68 | 57.40 | ||||||||||
| M-72 | 63.40 | 24.00 | |||||||||
Keep Bulk Stock Of Inconel 625 Washers
- Alloy 625 Spring Washers
- ASTM B166 Alloy 625 Dome Tooth Washer
- Inconel 625 Countersunk Washer
- UNS N06625 Tooth Lock Washer
- Inconel 625 Hexagonal Washer
- Alloy 625 Customized Washer
- Inconel® Alloy 625 Washers
- UNS N06625 Washer Supplier in Mumbai
- Inconel® Alloy 625 Plain Washer
- Inconel 2.4856 Washers
- Nickel Alloy 625 Fender Washer
- Inconel 625 Flat Washer
- Grade 625 Inconel Dome Washer
- Inconel Alloy 625 Hex Washers
- UNS N06625 Ogee Washer Stockists
- Inconel Alloy 625 Spring Washers
- Nickel Alloy Alloy 625 Dock Washer
- Grade 625 Inconel Split / Lock Washer
- Inconel 625 Dome Washer
- ASTM B166 Nickel Alloy 625 Square Washer
- Nickel Alloy 625 Washer
- Inconel® Alloy 625 Tooth Lock Washer
- 2.4856 Washer Supplier
- 2.4856 Hex Split Ring Washer
- Inconel 625 Spring Washers
- Inconel 625 Finishing Washers
- Inconel Alloy 625 Countersunk Finishing Washer
- 625 Inconel Spherical Washer
- ASTM B166 Inconel Alloy 625 Cup Washer
- UNS N06625 Star Washers
- Alloy 625 K Curved Spring Washer
- 2.4856 Dome Washer
- Inconel 625 Tab Washer
- Inconel 625 Conical Spring Washer Exporter
- Inconel® Alloy 625 Machine Washer
- Alloy 625 Washers
- Inconel 625 Wave Washer Manufacturer
- Inconel 625 Belleville Washers
- 625 Inconel Split Ring Washer
- ASTM B166 Inconel 625 Punched Washer
- Nickel Alloy 625 Round Washer Supplier
- Alloy 625 Industrial Washers in Mumbai, India
- Nickel Alloy 625 Cup Washer Price List
- Inconel Alloy 625 Self Wave Washer
- DIN 2.4856 Star Washers
- ASTM B166 Inconel® Alloy 625 Flat Washer
Inconel 625 Washers Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay
