DIN 2.4066 Fasteners, 200 Nickel Stud Bolts Manufacturer, UNS N02200 Fasteners, Nickel Alloy 200 Nuts, Nickel 201 Bolts, Alloy 200 Washers Suppliers in India.
Victor Steel Corporation is an acknowledged seller of Nickel Alloy 200 Fasteners / Nickel Alloy 201 Fasteners, where ductility is the property of such metals that allows them to be routinely deformed whilst cold without fracturing. Grain Boundary of this Nickel Alloy UNS N02200 Fasteners is just like the bounding surface among crystals. When alloys yield new phases, grain barriers are the favoured area for the arrival of the brand new phase. Certain deteriorations, which include season cracking and caustic embrittlement, commonly arise at grain barriers. Grain Growth is a boom in metal crystal length as annealing temperature is raised; boom takes place by means of invasion of crystal regions by means of different crystals. Impact Test is a check designed to determine, the resistance of Nickel Alloy UNS N02201 Fasteners to breakage by means of effect, commonly by means of concentrating the carried out strain to a notched specimen. Grain Size of this alloy is like a mean diameter of grains within the metallic below consideration, or alternatively, the range of grains consistent in company of unit area. Since boom in grain length is paralleled by means of decrease ductility and effect resistance, the query of popular grain length is of top notch significance.
Nickel 200 Anchor Bolts, UNS N02201 Carriage Bolts, Nickel Alloy 201 Flat Washers, Alloy 201 Nuts, Alloy 201 Allen Cap Screw, Nickel Alloy 201 Screws, Nickel Alloy 201 Threaded Rod, Nickel 200 Industrial Fasteners, 2.4066 Fasteners, Nickel 200 Hex Bolts Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For Nickel Alloy 200 / 201 Fasteners
- Different Forms of Nickel Alloy 200 / 201 Fasteners
- Equivalent Grade Chart Of Nickel Alloy 200 / 201 Fasteners
- Standards of Nickel Alloy 200 / 201 Fasteners
- Chemical Composition Of Nickel Alloy 200 / 201 Fasteners
- Mechanical Properties Of Nickel Alloy 200 / 201 Fasteners
- Size Chart of Nickel Alloy 200 / 201 Bolts
- Nickel Alloy 200 / 201 Nut Dimensions Metric
- Nickel Alloy 200 / 201 Washer Weight & Dimensions
- Nickel Alloy 200 / 201 Stud Bolt Size Chart
- Keep Bulk Stock Of Nickel Alloy 200 / 201 Fasteners
- Nickel Alloy 200 / 201 Fasteners Export to below Mentioned Countries
- Nickel Alloy 200 / 201 Fasteners Application Area
Half Hard Temper for Nickel Alloy WNR 2.4066 Fasteners in low carbon cold-rolled strip metallic produced by means of cold rolling to hardness subsequent to, however really softer than, complete difficult mood. In brass steel, tempers are primarily based totally on minimal tensile or yield strength. Hard Drawing of this alloy is like a sort of drawing metallic twine thru a die to lessen move phase and boom tensile strength.
Hardenability for Nickel Alloy WNR 2.4068 Fasteners is the capacity of a metallic; commonly metallic, to harden intensive as outstanding from the time period “hardness.” Hardening is any procedure which will increase the hardness of a metallic. Usually heating and quenching positive iron base alloys from a temperature both inside and above the crucial temperature variety. Hardness is a degree to which a metallic will withstand cutting, abrasion, penetration, bending and stretching.
Standard Specification For Nickel Alloy 200 / 201 Fasteners
| Standard | ASTM B160, ASME SB160 |
|---|---|
| Size | M 02 to M 33 |
| Length | 3 mm to 200 mm |
| Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard: | DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
| Scope of Manufacturer |
|
| Dia | M6 to M64 (1/4" - 2.5") |
| Length | 12 MM - 500 MM (Upto 20 Inch) |
| IS | 1363, 1364 |
| DIN | 931, 933 |
| ISO | ISO 3506 |
| Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
| Head Drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
| Finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
| Production Process | M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element |
| Types | Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts |
Check Nickel 200 Hex Bolts From ½” Up To 4” In Diameter, M3 to M56 Alloy 201 Fasteners, Nickel Alloy 200 Nuts Manufacturer India, View Updated Nickel 201 Hex Head, Heavy Hex Bolts & Cap Screws Price List In India.
Different Forms of Nickel Alloy 200 / 201 Fasteners
Equivalent Grade Chart Of Nickel Alloy 200 / 201 Fasteners
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | - | LC-Ni 99 |
Standards of Nickel Alloy 200 / 201 Fasteners
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
Chemical Composition Of Nickel Alloy 200 / 201 Fasteners
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties Of Nickel Alloy 200 / 201 Fasteners
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 / 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Size Chart of Nickel Alloy 200 / 201 Bolts
| Nominal or Basic Product Diameter | E | F | G | H | J | LT (Thread Length) | Y | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Body Diameter | Width Across Flats | Width Across Corners | Head Height | Wrenching Height | For Screw Lengths | For Screw Lengths | Transition Thread Length | ||||||||
| 1/4 | 0.25 | 0.25 | 0.245 | 7/16 | 0.438 | 0.428 | 0.505 | 0.488 | 5/32 | 0.163 | 0.150 | 0.106 | 0.750 | 1.000 | 0.250 |
| 5/16 | 0.3125 | 0.3125 | 0.3065 | 1/2 | 0.500 | 0.489 | 0.577 | 0.557 | 13/64 | 0.211 | 0.195 | 0.140 | 0.875 | 1.125 | 0.278 |
| 3/8 | 0.375 | 0.375 | 0.369 | 9/16 | 0.562 | 0.551 | 0.650 | 0.628 | 15/64 | 0.243 | 0.226 | 0.160 | 1.000 | 1.250 | 0.312 |
| 7/16 | 0.4375 | 0.4375 | 0.4305 | 5/8 | 0.625 | 0.612 | 0.722 | 0.698 | 9/32 | 0.291 | 0.272 | 0.195 | 1.125 | 1.375 | 0.357 |
| 1/2 | 0.5 | 0.5 | 0.493 | 3/4 | 0.750 | 0.736 | 0.866 | 0.840 | 5/16 | 0.323 | 0.302 | 0.215 | 1.250 | 1.500 | 0.385 |
| 9/16 | 0.5625 | 0.5625 | 0.5545 | 13/16 | 0.812 | 0.798 | 0.938 | 0.910 | 23/64 | 0.371 | 0.348 | 0.250 | 1.375 | 1.625 | 0.417 |
| 5/8 | 0.625 | 0.625 | 0.617 | 15/16 | 0.938 | 0.922 | 1.083 | 1.051 | 25/64 | 0.403 | 0.378 | 0.269 | 1.500 | 1.750 | 0.455 |
| 3/4 | 0.75 | 0.75 | 0.741 | 1-1/8 | 1.125 | 1.100 | 1.299 | 1.254 | 15/32 | 0.483 | 0.455 | 0.324 | 1.750 | 2.000 | 0.500 |
| 7/8 | 0.875 | 0.875 | 0.866 | 1-5/16 | 1.312 | 1.285 | 1.516 | 1.465 | 35/64 | 0.563 | 0.531 | 0.378 | 2.000 | 2.250 | 0.556 |
| 1 | 1 | 1 | 0.99 | 1-1/2 | 1.500 | 1.469 | 1.732 | 1.675 | 39/64 | 0.627 | 0.591 | 0.416 | 2.250 | 2.500 | 0.625 |
| 1-1/8 | 1.125 | 1.125 | 1.114 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 11/16 | 0.718 | 0.658 | 0.461 | 2.500 | 2.750 | 0.714 |
| 1-1/4 | 1.25 | 1.25 | 1.239 | 1-7/8 | 1.875 | 1.812 | 2.165 | 2.066 | 25/32 | 0.813 | 0.749 | 0.530 | 2.750 | 3.000 | 0.714 |
| 1-1/2 | 1.5 | 1.5 | 1.488 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 15/16 | 0.974 | 0.902 | 0.640 | 3.250 | 3.500 | 0.833 |
Nickel Alloy 200 / 201 Nut Dimensions Metric
| Nut Size | F | C | H | |||||
| Width Across Flats | Width Across Corners | Thickness | ||||||
| Basic | Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | |
| 1/2 | 3/4 | 0.750 | 0.736 | 0.866 | 0.840 | 7/16 | 0.448 | 0.427 |
| 5/8 | 15/16 | 0.938 | 0.922 | 1.083 | 1.051 | 35/64 | 0.559 | 0.535 |
| 3/4 | 11/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | 0.665 | 0.617 |
| 7/8 | 15/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | 0.776 | 0.724 |
| 1 | 11/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | 0.887 | 0.831 |
| 11/8 | 111/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | 0.999 | 0.939 |
| 11/4 | 17/8 | 1.875 | 1.812 | 2.165 | 2.066 | 11/16 | 1.094 | 1.030 |
| 13/8 | 21/16 | 2.062 | 1.994 | 2.382 | 2.273 | 111/64 | 1.206 | 1.138 |
| 11/2 | 21/4 | 2.250 | 2.175 | 2.598 | 2.480 | 19/32 | 1.317 | 1.245 |
Nickel Alloy 200 / 201 Washer Weight & Dimensions
| Bolt Size | A | B | C | Weight (lbs.) Per 100 Pieces |
| ID | OD | Thickness | ||
| 1/2 | 9/16 | 13/8 | 0.109 | 4 |
| 5/8 | 11/16 | 13/4 | 0.134 | 8 |
| 3/4 | 13/16 | 2 | 0.148 | 11 |
| 7/8 | 15/16 | 21/4 | 0.165 | 15 |
| 1 | 11/16 | 21/2 | 0.165 | 19 |
| 11/8 | 11/4 | 23/4 | 0.165 | 22 |
| 11/4 | 13/8 | 3 | 0.165 | 26 |
| 13/8 | 11/2 | 31/4 | 0.180 | 33 |
| 11/2 | 15/8 | 31/2 | 0.180 | 38 |
| 15/8 | 13/4 | 33/4 | 0.180 | 43 |
| 13/4 | 17/8 | 4 | 0.180 | 50 |
| 17/8 | 2 | 41/4 | 0.180 | 57 |
| 2 | 21/8 | 41/2 | 0.180 | 63 |
| 21/4 | 23/8 | 43/4 | 0.220 | 83 |
| 21/2 | 25/8 | 5 | 0.238 | 96 |
| 23/4 | 27/8 | 51/4 | 0.259 | 110 |
| 3 | 31/8 | 51/2 | 0.284 | 130 |
Nickel Alloy 200 / 201 Stud Bolt Size Chart
| Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
|---|---|---|---|---|---|---|---|---|
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
| 3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
| 1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
| 6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
| 12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
| 14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
| 16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
| 18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
| 20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
| 24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
| Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
| 2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
| 4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
| 5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
| 6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
| 8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
| 10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
| 12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
| 14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
| 16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
| 18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
| 20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
| 24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 | |
Keep Bulk Stock Of Nickel Alloy 200 / 201 Fasteners
- Alloy 201 Concrete Screw
- UNS N02200 Nickel Socket Cap Screw
- Nickel Alloy 200 Hex Set Screw
- Nickel 201 Hex Head Bolt
- ASTM B160 Nickel 200 Acorn Nuts
- Nickel 2.4068 Fasteners
- Alloy 200 Heavy Hex Bolts
- Nickel Alloy 201 Nuts
- Nickel 200 Bolts
- Nickel Alloy 200 Heavy Hex Nuts
- Nickel Alloy 201 Stud Bolts
- Nickel Alloy 200 Eye Bolts
- Nickel Alloy 200 Double Ended Stud
- ANSI B18.2 Nickel 200 Carriage Bolt
- 2.4068 Tie Rods Supplier
- UNS N02200 Nickel Wing Nuts Stockists
- 201 Nickel Anchor Bolts
- Nickel 201 Flange Bolt
- UNS N02201 Fasteners Supplier in Mumbai
- Grade 201 Nickel Foundation Bolts
- Nickel Alloy 200 Wing Nuts
- 201 Nickel Screws
- Grade 200 Nickel Elevator Bolt
- ASTM B160 Nickel Alloy 201 Coupling Nut
- Alloy 201 Industrial Fasteners
- Nickel Alloy 200 Machine Fasteners Supplier
- Nickel 200 Fasteners
- Nickel Alloy 200 Self Locking Nuts
- Alloy 200 Hexagonal Washer
- Nickel Alloy 201 Square Nuts
- Nickel 201 Customized Washer
- Nickel 200 Plain Washer
- UNS N02201 Ogee Washer
- Nickel Alloy 200 Threaded Rod
- Nickel Alloy 201 Allen Cap Screw Price List
- Nickel 201 Flange Lock Nut
- 200 Nickel Machine Bolt
- DIN 2.4066 Dock Washer
- ASTM B160 Nickel 201 Tooth Lock Washer
- Alloy 201 Countersunk Washer
- Nickel 200 Hex Washers
- 2.4068 Hex Domed Cap Nuts
- ASTM B160 Nickel Alloy 200 Structural Bolts
- Nickel 201 T-Head Bolts
- Nickel 201 Flat Washers Manufacturer
- Alloy 200 Fender Washer in Mumbai, India
- 2.4066 Split / Lock Washer
- Nickel 200 Hex Head Bolts Exporter
- ASTM B160 Nickel Alloy 201 Hex Coupling Nut
- 201 Nickel Nyloc Nuts
Nickel Alloy 200 / 201 Fasteners Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay
