DIN 2527 Flange, Raised Face DIN Flange, Duplex Steel Raised Face DIN Flange, DIN PN10-PN25 Manufacturer, DIN 2527 PN16 Steel Flange Suppliers in India.
Victor Steel Corporation is a standardmanufacturer and supplierof DIN Pipe Flanges, whichis an alloy that resists excessive temperature oxidation. The alloy needs to rather be welded within the strain-equalized situation and solution annealed and age hardened following welding.This Hastelloy Alloy DINOrifice Flangesis an excessive-energy nickel-base excessive-temperature alloy whose extremely good properties can be received thru age hardening. Several warmness remedies are available, and are used consistent in company of the application requirements. For most creep, rest and rupture energy at provider temperatures above 1100 Degree F (595 Degree C).The alloy is austenitic and work hardens rapidly. As such high quality feeds are required, collectively with sharp, inflexible tooling and system. It is high-quality machined within the strain-equalized situation.
DIN 2527 Flange, Nickel Alloy DIN 2527 PN40 Plate Flange, Hastelloy DIN Raised Face Flange, Alloy Steel DIN Flange, Nickel Alloy DIN Plate Flange, JIS 5K DIN 2527 PN25 Flange, Inconel Raised Face DIN 2566 Flange, Stainless Steel DIN 2527 PN16 Flange Dealer, SS DIN Flange, Class 150 Alloy Steel DIN PN10-PN25 Flange Manufacturer in Mumbai, India.
The alloy resists each chemical corrosion and oxidation, and has appropriate creep energy below excessive stresses within the temperature variety 1200 Degree F / 1500 Degree F (650 Degree C / 820 Degree C.) Nickel Alloy DIN Blind Flanges has appropriate rupture properties to 1600 Degree F (870 Degree C.) It is used for engine valves.In sure instances valves are used as-cast. They can be aged at 1300 Degree F (700 Degree C) after forging.Solution annealing is done at 2100 Degree F (1150 Degree C), with soaking for four hours and air cooling. It is machinable in all conditions; however a double-getting old warmth remedy will bring about advanced machinability.
The alloy resists each chemical corrosion and oxidation, and has appropriate creep energy below excessive stresses within the temperature variety 1200 Degree F / 1500 Degree F (650 Degree C / 820 Degree C.) Nickel Alloy DIN Blind Flanges has appropriate rupture properties to 1600 Degree F (870 Degree C.) It is used for engine valves.In sure instances valves are used as-cast. They can be aged at 1300 Degree F (700 Degree C) after forging.Solution annealing is done at 2100 Degree F (1150 Degree C), with soaking for four hours and air cooling. It is machinable in all conditions; however a double-getting old warmth remedy will bring about advanced machinability.
Specification Chart of DIN Flange
| Size | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
|---|---|
| Dimension Standard | ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings. |
| Class / Pressure Rating | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc. |
| DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| ANSI | ClassClass 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| BS | BS4504 , BS4504, BS1560, BS10, 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
| Special design | As per your drawing AS, ANSI, BS, DIN and BS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations BS Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange |
| DIN 2527 Flanges Standard |
|
| Testing and Documents | Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports |
| Packing | Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests |
Check DIN Flange, ASME B16.5 Class 150, Class 300 And Class 600 DIN Flange, DIN Flanges, DIN Raised Face Flanges Manufacturer India, View Updated Slip-On Flanges Price List In India.
Material Grades of ASME B16.5 Flanges
| Stainless Steel DIN Flange | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
| Carbon Steel DIN Flange | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
| Alloy Steel DIN Flanges | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
| Titanium DIN Flanges | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
| Copper DIN Flanges | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
| Copper Nickel DIN Flanges | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
| Inconel DIN Flanges | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 ANSI B16.5 Class 150 ANSI B16.5 Flanges |
| Hastelloy DIN Flanges | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
| Monel DIN Flanges | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
| Alloy 20 DIN Flanges | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
| Aluminium DIN Flanges | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
| Nickel Alloy DIN Flanges | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
| Duplex Steel DIN Flanges | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Super Duplex DIN Flanges | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Incoloy DIN Flanges | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
| 254 SMO DIN Flanges | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
| Nimonic DIN Flanges | Nimonic 75, Nimonic 80A, Nimonic 90 |
| Brass DIN Flanges | 3602 / 2604 / H59 / H62 / etc. |
| Other DIN Flanges material | Tin bronze, Alumunum bronze, Lead bronze |
DIN PN6-PN40 Flange Dimensions Diameters & Drilling of DIN Flanges (mm)
| Flange Nominal Diameter | Pressure Rating (PN) | |||||
|---|---|---|---|---|---|---|
| **Nominal BSP Pipe Size | PN6 | PN10 | PN16 | PN25 | PN40 | |
| DN 10 | 75 | 90 | 90 | 90 | 90 | O.D. |
| 3/8″ | 50 | 60 | 60 | 60 | 60 | PCD (bolt circle) |
| 4 x 11 | 4 x 14 | 4 x 14 | 4 x 14 | 4 x 14 | # of holes x diam. of holes | |
| DN 15 | 80 | 95 | 95 | 95 | 95 | O.D. |
| 1/2″ | 55 | 65 | 65 | 65 | 65 | PCD (bolt circle) |
| 4 x 11 | 4 x 14 | 4 x 14 | 4 x 14 | 4 x 14 | # of holes x diam. of holes | |
| DN 20 | 90 | 105 | 105 | 105 | 105 | O.D. |
| 3/4″ | 65 | 75 | 75 | 75 | 75 | PCD (bolt circle) |
| 4 x 11 | 4 x 14 | 4 x 14 | 4 x 14 | 4 x 14 | # of holes x diam. of holes | |
| DN 25 | 100 | 115 | 115 | 115 | 115 | O.D. |
| 1″ | 75 | 85 | 85 | 85 | 85 | PCD (bolt circle) |
| 4 x 11 | 4 x 14 | 4 x 14 | 4 x 14 | 4 x 14 | # of holes x diam. of holes | |
| DN 32 | 120 | 140 | 140 | 140 | 140 | O.D. |
| 1 1/4″ | 90 | 100 | 100 | 100 | 100 | PCD (bolt circle) |
| 4 x 14 | 4 x 18 | 4 x 18 | 4 x 18 | 4 x 18 | # of holes x diam. of holes | |
| DN 40 | 130 | 150 | 150 | 150 | 150 | O.D. |
| 1 1/2″ | 100 | 110 | 110 | 110 | 110 | PCD (bolt circle) |
| 4 x 14 | 4 x 18 | 4 x 18 | 4 x 18 | 4 x 18 | # of holes x diam. of holes | |
| DN 50 | 140 | 165 | 165 | 165 | 165 | O.D. |
| 2″ | 110 | 125 | 125 | 125 | 125 | PCD (bolt circle) |
| 4 x 14 | 4 x 18 | 4 x 18 | 4 x 18 | 4 x 18 | # of holes x diam. of holes | |
| DN 65 | 160 | 185 | 185 | 185 | 185 | O.D. |
| 2 1/2″ | 130 | 145 | 145 | 145 | 145 | PCD (bolt circle) |
| 4 x 14 | 4 x 18 | 4 x 18 | 8 x 18 | 8 x 18 | # of holes x diam. of holes | |
| DN 80 | 190 | 200 | 200 | 200 | 200 | O.D. |
| 3″ | 150 | 160 | 160 | 160 | 160 | PCD (bolt circle) |
| 4 x 18 | 8 x 18 | 8 x 18 | 8 x 18 | 8 x 18 | # of holes x diam. of holes | |
| DN 100 | 210 | 220 | 220 | 235 | 235 | O.D. |
| 4″ | 170 | 180 | 180 | 190 | 190 | PCD (bolt circle) |
| 4 x 18 | 8 x 18 | 8 x 18 | 8 x 22 | 8 x 22 | # of holes x diam. of holes | |
| DN 125 | 240 | 250 | 250 | 270 | 270 | O.D. |
| 5″ | 200 | 210 | 210 | 220 | 220 | PCD (bolt circle) |
| 8 x 18 | 8 x 18 | 8 x 18 | 8 x 26 | 8 x 26 | # of holes x diam. of holes | |
| DN 150 | 265 | 285 | 285 | 300 | 300 | O.D. |
| 6″ | 225 | 240 | 240 | 250 | 250 | PCD (bolt circle) |
| 8 x 18 | 8 x 22 | 8 x 22 | 8 x 26 | 8 x 26 | # of holes x diam. of holes | |
| DN 175 | 315 | 315 | 330 | 350 | O.D. | |
| 7″ | 270 | 270 | 280 | 295 | PCD (bolt circle) | |
| 8 x 22 | 8 x 22 | 12 x 26 | 12 x 30 | # of holes x diam. of holes | ||
| DN 200 | 320 | 340 | 340 | 360 | 375 | O.D. |
| 8″ | 280 | 295 | 295 | 310 | 320 | PCD (bolt circle) |
| 8 x 18 | 8 x 22 | 12 x 22 | 12 x 26 | 12 x 30 | # of holes x diam. of holes | |
| DN 250 | 375 | 395 | 405 | 425 | 450 | O.D. |
| 10″ | 335 | 350 | 355 | 370 | 385 | PCD (bolt circle) |
| 12 x 18 | 12 x 22 | 12 x 26 | 12 x 30 | 12 x 33 | # of holes x diam. of holes | |
| DN 300 | 440 | 445 | 460 | 485 | 515 | O.D. |
| 12″ | 395 | 400 | 410 | 430 | 450 | PCD (bolt circle) |
| 12 x 22 | 12 x 22 | 12 x 26 | 16 x 30 | 16 x 33 | # of holes x diam. of holes | |
| DN 350 | 490 | 505 | 520 | 555 | 580 | O.D. |
| 14″ | 445 | 460 | 470 | 490 | 510 | PCD (bolt circle) |
| 12 x 22 | 16 x 22 | 16 x 26 | 16 x 33 | 16 x 36 | # of holes x diam. of holes | |
| DN 400 | 540 | 565 | 580 | 620 | 660 | O.D. |
| 16″ | 495 | 515 | 525 | 550 | 585 | PCD (bolt circle) |
| 16 x 22 | 16 x 26 | 16 x 30 | 16 x 36 | 16 x 39 | # of holes x diam. of holes | |
| DN 500 | 645 | 670 | 715 | 730 | 755 | O.D. |
| 20″ | 600 | 620 | 650 | 660 | 670 | PCD (bolt circle) |
| 20 x 22 | 20 x 26 | 20 x 33 | 20 x 36 | 20 x 42 | # of holes x diam. of holes | |
| DN 600 | 755 | 780 | 840 | 845 | O.D. | |
| 24″ | 705 | 725 | 770 | 770 | PCD (bolt circle) | |
| 20 x 24 | 20 x 27 | 20 x 33 | 20 x 36 | # of holes x diam. of holes | ||
Dimensions & Approximate Masses of DIN 2573 PN6 Flange
| Germany standard flange DIN 2573 for soldering or welding Nominall Pressure 6 | |||||||||||
| Flanges, smooth for soldering or welding DIN 2573 nominal pressure 6 | |||||||||||
| Weld flat flanges DIN 2573 nominal pressure 6 | |||||||||||
| Pipe | Flange | Screws | Weight (7,85 Kg/dm3) |
||||||||
| Rated Diameter |
d1 | d5 | D | b | c | k | Holes | Thread | d2 | Kg | |
| ISO Series 1 | DIN Series 2 | ||||||||||
| 15 | – | 20 | 21 | 80 | 12 | 5 | 55 | 4 | M 10 | 11 | 0,41 |
| 21,3 | – | 22 | |||||||||
| 20 | – | 25 | 26 | 90 | 14 | 5 | 65 | 4 | M 10 | 11 | 0,60 |
| 26,9 | – | 27,6 | |||||||||
| 25 | – | 30 | 31 | 100 | 14 | 5 | 75 | 4 | M 10 | 11 | 0,74 |
| 33,7 | – | 34,4 | |||||||||
| 32 | – | 38 | 39 | 120 | 16 | 5 | 90 | 4 | M 12 | 14 | 1,19 |
| 42,4 | – | 43,1 | |||||||||
| 40 | – | 44,5 | 45,5 | 130 | 16 | 5 | 100 | 4 | M 12 | 14 | 1,39 |
| 48,3 | – | 49 | |||||||||
| 50 | – | 57 | 58,1 | 140 | 16 | 6 | 110 | 4 | M 12 | 14 | 1,53 |
| 60,3 | – | 61,1 | |||||||||
| 65 | 76,1 | – | 77,1 | 160 | 16 | 6 | 130 | 4 | M 12 | 14 | 1,89 |
| 80 | 88,9 | – | 90,3 | 190 | 18 | 7 | 150 | 4 | M 16 | 18 | 2,98 |
| 100 | – | 108 | 109,6 | 210 | 18 | 7 | 170 | 4 | M 16 | 18 | 3,46 |
| 114,3 | – | 115,9 | |||||||||
| 125 | – | 133 | 134,8 | 240 | 20 | 7 | 200 | 8 | M 16 | 18 | 4,60 |
| 139,7 | – | 141,6 | |||||||||
| 150 | – | 159 | 161,1 | 265 | 20 | 7 | 225 | 8 | M 16 | 18 | 5,22 |
| 168,3 | – | 170,5 | |||||||||
| 200 | 219,1 | – | 221,8 | 320 | 22 | 7 | 280 | 8 | M 16 | 18 | 7,15 |
| 250 | – | 267 | 270,2 | 375 | 24 | 7 | 335 | 12 | M 16 | 18 | 9,61 |
| 273 | – | 276,2 | |||||||||
| 300 | 323,9 | – | 327,6 | 440 | 24 | 7 | 395 | 12 | M 20 | 22 | 12,60 |
| 350 | 355,6 | – | 359,7 | 490 | 26 | 7 | 445 | 12 | M 20 | 22 | 15,60 |
| – | 368 | 372,2 | |||||||||
| 400 | 406,4 | – | 411 | 540 | 28 | 7 | 495 | 16 | M 20 | 22 | 18,40 |
| – | 419 | 423,7 | |||||||||
| (450)* | 457 | – | 462,5 | 595 | 30 | 7 | 550 | 16 | M 20 | 22 | 21,40 |
| 500 | 508 | – | 531,6 | 645 | 30 | 7 | 600 | 20 | M 20 | 22 | 24,60 |
Dimensions & Approx Masses of DIN 2631 PN6 WNRF Flange
| Germany Standard Flange DIN 2631 Welding Neck Flanges; Nominal Pressure 6 | ||||||||||||||||
| Welding Neck Flanges DIN 2631 Nominal Pressure 6 | ||||||||||||||||
| DIN 2631 Flange Welding Flanges: Nominal Pressure 6 | ||||||||||||||||
| Pipe | Flange | Neck | Raised face | Screws | Weight | |||||||||||
| (7.85 Kg/dm3) | ||||||||||||||||
| Rated | d1 | D | b | k | h1 | d3 | s | r | h2 | d4 | f | Holes | Thread | d2 | Kg | |
| Diameter | ISO Series | DIN Series | ||||||||||||||
| 15 | – | 20 | 80 | 12 | 55 | 30 | 28 | 2 | 4 | 6 | 40 | 2 | 4 | M 10 | 11 | 0,392 |
| 21,3 | – | 30 | ||||||||||||||
| 20 | – | 25 | 90 | 14 | 65 | 32 | 35 | 2,3 | 4 | 6 | 50 | 2 | 4 | M 10 | 11 | 0,592 |
| 26,9 | – | 38 | ||||||||||||||
| 25 | – | 30 | 100 | 14 | 75 | 35 | 40 | 2,6 | 4 | 6 | 60 | 2 | 4 | M 10 | 11 | 0,747 |
| 33,7 | – | 42 | ||||||||||||||
| 32 | – | 38 | 120 | 14 | 90 | 35 | 50 | 2,6 | 6 | 6 | 70 | 2 | 4 | M 12 | 14 | 1,05 |
| 42,4 | – | 55 | ||||||||||||||
| 40 | – | 44,5 | 130 | 14 | 100 | 38 | 58 | 2,6 | 6 | 7 | 80 | 3 | 4 | M 12 | 14 | 1,18 |
| 48,3 | – | 62 | ||||||||||||||
| 50 | – | 57 | 140 | 14 | 110 | 38 | 70 | 2,9 | 6 | 8 | 90 | 3 | 4 | M 12 | 14 | 1,34 |
| 60,3 | – | 74 | ||||||||||||||
| 65 | 76,1 | – | 160 | 14 | 130 | 38 | 88 | 2,9 | 6 | 9 | 110 | 3 | 4 | M 12 | 14 | 1,67 |
| 80 | 88,9 | – | 190 | 16 | 150 | 42 | 102 | 3,2 | 8 | 10 | 128 | 3 | 4 | M 16 | 18 | 2,71 |
| 100 | – | 108 | 210 | 16 | 170 | 45 | 122 | 3,6 | 8 | 10 | 148 | 3 | 4 | M 16 | 18 | 3,24 |
| 114,3 | 130 | |||||||||||||||
| 125 | – | 133 | 240 | 18 | 200 | 48 | 148 | 4 | 8 | 10 | 178 | 3 | 8 | M 16 | 18 | 4,49 |
| 139,7 | – | 155 | ||||||||||||||
| 150 | – | 159 | 265 | 18 | 225 | 48 | 172 | 4,5 | 10 | 12 | 202 | 3 | 8 | M 16 | 18 | 5,15 |
| 168,3 | – | 184 | ||||||||||||||
| 200 | 219,1 | – | 320 | 20 | 280 | 55 | 236 | 5,9 | 10 | 15 | 258 | 3 | 8 | M 16 | 18 | 7,78 |
| 250 | – | 267 | 375 | 22 | 335 | 60 | 282 | 6,3 | 12 | 15 | 312 | 3 | 12 | M 16 | 18 | 10,8 |
| 273 | – | 290 | ||||||||||||||
| 300 | 323,9 | – | 440 | 22 | 395 | 62 | 342 | 7,1 | 15 | 15 | 365 | 4 | 12 | M 20 | 22 | 14 |
| 350 | 355,6 | – | 490 | 22 | 445 | 62 | 385 | 7,1 | 12 | 15 | 415 | 4 | 12 | M 20 | 22 | 18,5 |
| – | 368 | 16,7 | ||||||||||||||
| 400 | 406,4 | – | 540 | 22 | 495 | 65 | 438 | 7,1 | 12 | 15 | 465 | 4 | 16 | M 20 | 22 | 21,2 |
| – | 419 | 19 | ||||||||||||||
| 500 | 508 | – | 645 | 24 | 600 | 68 | 538 | 7,1 | 12 | 15 | 570 | 4 | 20 | M 20 | 22 | 28,6 |
| 600 | 610 | – | 755 | 24 | 705 | 70 | 640 | 7,1 | 12 | 16 | 670 | 5 | 20 | M 24 | 26 | 31,5 |
| 700 | 711 | – | 860 | 24 | 810 | 70 | 740 | 7,1 | 12 | 16 | 775 | 5 | 24 | M 24 | 26 | 37,4 |
| 800 | 813 | – | 975 | 24 | 920 | 70 | 842 | 7,1 | 12 | 16 | 880 | 5 | 24 | M 27 | 30 | 46,1 |
| 900 | 914 | – | 1075 | 26 | 1020 | 70 | 942 | 7,1 | 12 | 16 | 980 | 5 | 24 | M 27 | 30 | 55,6 |
| 1000 | 1016 | – | 1175 | 26 | 1120 | 70 | 1045 | 7,1 | 16 | 16 | 1080 | 5 | 28 | M 27 | 30 | 61,9 |
DIN 2565 PN6 THREADED FLANGE
| DIN 2565 PN 6 THREADED FLANGE SPECIFICATION | |||||||||||||
| Rated Diameter |
Flange | Neck | Raised face | Screws | Weight (7,85 Kg/dm3) |
||||||||
| d1 | Thread | D | b | k | h1 | d3 | d4 | f | Holes | Thread | d2 | Kg | |
| 15 | 21,3 | R 1/2 | 80 | 12 | 55 | 20 | 30 | 40 | 2 | 4 | M 10 | 11 | 0,373 |
| 20 | 26,9 | R 3/4 | 90 | 14 | 65 | 24 | 40 | 50 | 2 | 4 | M 10 | 11 | 0,59 |
| 25 | 33,7 | R 1 | 100 | 14 | 75 | 24 | 50 | 60 | 2 | 4 | M 10 | 11 | 0,743 |
| 32 | 42,4 | R 1 1/4 | 120 | 14 | 90 | 26 | 60 | 70 | 2 | 4 | M 12 | 14 | 1,05 |
| 40 | 48,3 | R 1 1/2 | 130 | 14 | 100 | 26 | 70 | 80 | 3 | 4 | M 12 | 14 | 1,2 |
| 50 | 60,3 | R 2 | 140 | 14 | 110 | 28 | 80 | 90 | 3 | 4 | M 12 | 14 | 1,37 |
| 65 | 76,1 | R 2 1/2 | 160 | 14 | 130 | 32 | 100 | 110 | 3 | 4 | M 12 | 14 | 1,92 |
| 80 | 88,9 | R 3 | 190 | 16 | 150 | 34 | 110 | 128 | 3 | 4 | M 16 | 18 | 2,82 |
| 100 | 114,3 | R 4 | 210 | 16 | 170 | 38 | 130 | 148 | 3 | 4 | M 16 | 18 | 3,19 |
| 125 | 139,7 | R 5 | 240 | 18 | 200 | 40 | 160 | 178 | 3 | 8 | M 16 | 18 | 4,47 |
| 150 | 165,1 | R 6 | 265 | 18 | 225 | 44 | 185 | 202 | 3 | 8 | M 16 | 18 | 5,3 |
DIN 2566 PN16 Threaded Flanges
| DIN 2566 PN16 THREADED FLANGE SPECIFICATION | |||||||||||||
| Rated Diameter |
Flange | Neck | Raised face | Screws | Weight (7,85 Kg/dm3) |
||||||||
| d1 | Thread | D | b | k | h1 | d3 | d4 | f | Holes | Thread | d2 | Kg | |
| 15 | 21,3 | R 1/2 | 95 | 14 | 65 | 20 | 35 | 45 | 2 | 4 | M 12 | 14 | 0,613 |
| 20 | 26,9 | R 3/4 | 105 | 16 | 75 | 24 | 45 | 58 | 2 | 4 | M 12 | 14 | 0,91 |
| 25 | 33,7 | R 1 | 115 | 16 | 85 | 24 | 52 | 68 | 2 | 4 | M 12 | 14 | 1,1 |
| 32 | 42,4 | R 1 1/4 | 140 | 16 | 100 | 26 | 60 | 78 | 2 | 4 | M 16 | 18 | 1,6 |
| 40 | 48,3 | R 1 1/2 | 150 | 16 | 110 | 26 | 70 | 88 | 3 | 4 | M 16 | 18 | 1,78 |
| 50 | 60,3 | R 2 | 165 | 18 | 125 | 28 | 85 | 102 | 3 | 4 | M 16 | 18 | 2,43 |
| 65 | 76,1 | R 2 1/2 | 185 | 18 | 145 | 32 | 105 | 122 | 3 | 4 | M 16 | 18 | 3,18 |
| 80 | 88,9 | R 3 | 200 | 20 | 160 | 34 | 118 | 138 | 3 | 8 | M 16 | 18 | 4,12 |
| 100 | 114,3 | R 4 | 220 | 20 | 180 | 38 | 140 | 158 | 3 | 8 | M 16 | 18 | 4,47 |
| 125 | 139,7 | R 5 | 250 | 22 | 210 | 40 | 168 | 188 | 3 | 8 | M 16 | 18 | 6,13 |
| 150 | 165,1 | R 6 | 285 | 22 | 240 | 44 | 195 | 212 | 3 | 8 | M 20 | 22 | 7,92 |
Dimensions & Approx Masses of DIN 2527 Blind Flange
| Germany standard flange DIN 2527 Blind flange Nominal Pressure 6 to 100 | |||||||
| Blind flanges nominal pressure 6 to 100 | |||||||
| Plain flanges, nominal pressures 6 to 100 | |||||||
| DIN 2527 PN6 BLIND FLANGE | |||||||
| Rated Diameter |
Flange | Screws | Weight (7,85 Kg/dm3) |
||||
| D | b | k | Number | Thread | d2 | Shape B | |
| Kg | |||||||
| 15 | 80 | 12 | 55 | 4 | M 10 | 11 | 0.44 |
| 20 | 90 | 14 | 65 | 0.66 | |||
| 25 | 100 | 14 | 75 | 0.83 | |||
| 32 | 120 | 14 | 90 | M 12 | 14 | 1.18 | |
| 40 | 130 | 14 | 100 | 1.39 | |||
| 50 | 140 | 14 | 110 | 1.63 | |||
| 65 | 160 | 14 | 130 | 2.15 | |||
| 80 | 190 | 16 | 150 | M 16 | 18 | 3.44 | |
| 100 | 210 | 16 | 170 | 4.22 | |||
| 125 | 240 | 18 | 200 | 8 | 6.11 | ||
| 150 | 265 | 18 | 225 | 7.51 | |||
| 200 | 320 | 20 | 280 | 12.31 | |||
| 250 | 375 | 22 | 335 | 12 | 18.54 | ||
| 300 | 440 | 22 | 395 | M 20 | 22 | 25.46 | |
| 350 | 490 | 22 | 445 | 31.77 | |||
| 400 | 540 | 22 | 495 | 16 | 38.49 | ||
| 500 | 645 | 24 | 600 | 20 | 60.10 | ||
| DIN 2527 PN10 BLIND FLANGE | |||||||
| Rated Diameter |
Flange | Screws | Weight (7,85 Kg/dm3) |
||||
| D | b | k | Number | Thread | d2 | Shape B | |
| Kg | |||||||
| 15 | 95 | 14 | 65 | 4 | M 12 | 14 | 0,72 |
| 20 | 105 | 16 | 75 | 1,01 | |||
| 25 | 115 | 16 | 85 | 1,23 | |||
| 32 | 140 | 16 | 100 | M 16 | 18 | 1,8 | |
| 40 | 150 | 16 | 110 | 2,09 | |||
| 50 | 165 | 18 | 125 | 2,88 | |||
| 65 | 185 | 18 | 145 | 3,66 | |||
| 80 | 200 | 20 | 160 | 4,77 | |||
| 100 | 220 | 20 | 180 | 8 | 5,65 | ||
| 125 | 250 | 22 | 210 | 8,42 | |||
| 150 | 285 | 22 | 240 | M 20 | 22 | 10,4 | |
| 200 | 340 | 24 | 295 | 16,5 | |||
| 250 | 395 | 26 | 350 | 12 | 24 | ||
| 300 | 445 | 26 | 400 | 30,9 | |||
| 350 | 505 | 26 | 460 | 16 | 40,6 | ||
| 400 | 565 | 26 | 515 | M 24 | 26 | 49,4 | |
| 500 | 670 | 28 | 620 | 20 | 75 | ||
| DIN 2527 PN16 BLIND FLANGE | |||||||
| Rated Diameter |
Flange | Screws | Weight (7,85 Kg/dm3) |
||||
| D | b | k | Number | Thread | d2 | Shape B | |
| Kg | |||||||
| 15 | 95 | 14 | 65 | 4 | M 12 | 14 | 0,72 |
| 20 | 105 | 16 | 75 | 1,01 | |||
| 25 | 115 | 16 | 85 | 1,23 | |||
| 32 | 140 | 16 | 100 | M 16 | 18 | 1,8 | |
| 40 | 150 | 16 | 110 | 2,09 | |||
| 50 | 165 | 18 | 125 | 2,88 | |||
| 65 | 185 | 18 | 145 | 3,66 | |||
| 80 | 200 | 20 | 160 | 8 | 4,77 | ||
| 100 | 220 | 20 | 180 | 5,65 | |||
| 125 | 250 | 22 | 210 | 8,42 | |||
| 150 | 285 | 22 | 240 | M 20 | 22 | 10,4 | |
| 200 | 340 | 24 | 295 | 12 | 16,1 | ||
| 250 | 405 | 26 | 355 | M 24 | 26 | 24,9 | |
| 300 | 460 | 28 | 410 | 35,1 | |||
| 350 | 520 | 30 | 470 | 16 | 47,8 | ||
| 400 | 580 | 32 | 525 | M 27 | 30 | 63,5 | |
| 500 | 715 | 36 | 650 | 20 | M 30 | 33 | 102 |
Weight Chart Of DIN Flange
| Flange Nominal Diameter | Pressure Rating (PN) | |||||
|---|---|---|---|---|---|---|
| **Nominal BSP Pipe Size | PN6 | PN10 | PN16 | PN25 | PN40 | |
|
DN 10 |
75 |
90 |
90 |
90 |
90 |
O.D. |
|
3/8" |
50 |
60 |
60 |
60 |
60 |
PCD (bolt circle) |
|
|
4 x 11 |
4 x 14 |
4 x 14 |
4 x 14 |
4 x 14 |
# of holes x diam. of holes |
|
DN 15 |
80 |
95 |
95 |
95 |
95 |
O.D. |
|
1/2" |
55 |
65 |
65 |
65 |
65 |
PCD (bolt circle) |
|
|
4 x 11 |
4 x 14 |
4 x 14 |
4 x 14 |
4 x 14 |
# of holes x diam. of holes |
|
DN 20 |
90 |
105 |
105 |
105 |
105 |
O.D. |
|
3/4" |
65 |
75 |
75 |
75 |
75 |
PCD (bolt circle) |
|
|
4 x 11 |
4 x 14 |
4 x 14 |
4 x 14 |
4 x 14 |
# of holes x diam. of holes |
|
DN 25 |
100 |
115 |
115 |
115 |
115 |
O.D. |
|
1" |
75 |
85 |
85 |
85 |
85 |
PCD (bolt circle) |
|
|
4 x 11 |
4 x 14 |
4 x 14 |
4 x 14 |
4 x 14 |
# of holes x diam. of holes |
|
DN 32 |
120 |
140 |
140 |
140 |
140 |
O.D. |
|
1 1/4" |
90 |
100 |
100 |
100 |
100 |
PCD (bolt circle) |
|
|
4 x 14 |
4 x 18 |
4 x 18 |
4 x 18 |
4 x 18 |
# of holes x diam. of holes |
|
DN 40 |
130 |
150 |
150 |
150 |
150 |
O.D. |
|
1 1/2" |
100 |
110 |
110 |
110 |
110 |
PCD (bolt circle) |
|
|
4 x 14 |
4 x 18 |
4 x 18 |
4 x 18 |
4 x 18 |
# of holes x diam. of holes |
|
DN 50 |
140 |
165 |
165 |
165 |
165 |
O.D. |
|
2" |
110 |
125 |
125 |
125 |
125 |
PCD (bolt circle) |
|
|
4 x 14 |
4 x 18 |
4 x 18 |
4 x 18 |
4 x 18 |
# of holes x diam. of holes |
|
DN 65 |
160 |
185 |
185 |
185 |
185 |
O.D. |
|
2 1/2" |
130 |
145 |
145 |
145 |
145 |
PCD (bolt circle) |
|
|
4 x 14 |
4 x 18 |
4 x 18 |
8 x 18 |
8 x 18 |
# of holes x diam. of holes |
|
DN 80 |
190 |
200 |
200 |
200 |
200 |
O.D. |
|
3" |
150 |
160 |
160 |
160 |
160 |
PCD (bolt circle) |
|
|
4 x 18 |
8 x 18 |
8 x 18 |
8 x 18 |
8 x 18 |
# of holes x diam. of holes |
|
DN 100 |
210 |
220 |
220 |
235 |
235 |
O.D. |
|
4" |
170 |
180 |
180 |
190 |
190 |
PCD (bolt circle) |
|
|
4 x 18 |
8 x 18 |
8 x 18 |
8 x 22 |
8 x 22 |
# of holes x diam. of holes |
|
DN 125 |
240 |
250 |
250 |
270 |
270 |
O.D. |
|
5" |
200 |
210 |
210 |
220 |
220 |
PCD (bolt circle) |
|
|
8 x 18 |
8 x 18 |
8 x 18 |
8 x 26 |
8 x 26 |
# of holes x diam. of holes |
|
DN 150 |
265 |
285 |
285 |
300 |
300 |
O.D. |
|
6" |
225 |
240 |
240 |
250 |
250 |
PCD (bolt circle) |
|
|
8 x 18 |
8 x 22 |
8 x 22 |
8 x 26 |
8 x 26 |
# of holes x diam. of holes |
|
DN 175 |
|
315 |
315 |
330 |
350 |
O.D. |
|
7" |
|
270 |
270 |
280 |
295 |
PCD (bolt circle) |
|
|
|
8 x 22 |
8 x 22 |
12 x 26 |
12 x 30 |
# of holes x diam. of holes |
|
DN 200 |
320 |
340 |
340 |
360 |
375 |
O.D. |
|
8" |
280 |
295 |
295 |
310 |
320 |
PCD (bolt circle) |
|
|
8 x 18 |
8 x 22 |
12 x 22 |
12 x 26 |
12 x 30 |
# of holes x diam. of holes |
|
DN 250 |
375 |
395 |
405 |
425 |
450 |
O.D. |
|
10" |
335 |
350 |
355 |
370 |
385 |
PCD (bolt circle) |
|
|
12 x 18 |
12 x 22 |
12 x 26 |
12 x 30 |
12 x 33 |
# of holes x diam. of holes |
|
DN 300 |
440 |
445 |
460 |
485 |
515 |
O.D. |
|
12" |
395 |
400 |
410 |
430 |
450 |
PCD (bolt circle) |
|
|
12 x 22 |
12 x 22 |
12 x 26 |
16 x 30 |
16 x 33 |
# of holes x diam. of holes |
|
DN 350 |
490 |
505 |
520 |
555 |
580 |
O.D. |
|
14" |
445 |
460 |
470 |
490 |
510 |
PCD (bolt circle) |
|
|
12 x 22 |
16 x 22 |
16 x 26 |
16 x 33 |
16 x 36 |
# of holes x diam. of holes |
|
DN 400 |
540 |
565 |
580 |
620 |
660 |
O.D. |
|
16" |
495 |
515 |
525 |
550 |
585 |
PCD (bolt circle) |
|
|
16 x 22 |
16 x 26 |
16 x 30 |
16 x 36 |
16 x 39 |
# of holes x diam. of holes |
|
DN 500 |
645 |
670 |
715 |
730 |
755 |
O.D. |
|
20" |
600 |
620 |
650 |
660 |
670 |
PCD (bolt circle) |
|
|
20 x 22 |
20 x 26 |
20 x 33 |
20 x 36 |
20 x 42 |
# of holes x diam. of holes |
|
DN 600 |
755 |
780 |
840 |
845 |
|
O.D. |
|
24" |
705 |
725 |
770 |
770 |
|
PCD (bolt circle) |
|
|
20 x 24 |
20 x 27 |
20 x 33 |
20 x 36 |
|
# of holes x diam. of holes |
Keep Bulk Stock Of DIN Flange
- DIN 2527 Flange
- Duplex Steel 2205 DIN Flange Stockist
- Titanium DIN 2527 PN16 Flanges
- DIN Standard PN25 Flanges Manufacturer in Mumbai, India
- Class D Raised Face DIN 2527 Flange Supplier
- DIN Flange
- Class 75 DIN Plate Flange
- Class 600 DIN 2527 PN40 Flange
- Brass DIN Flange
- Monel Raised Face DIN 2527 PN40 Flange Stockist
- 1/2 DIN Flanges
- JIS 10K DIN PN10-PN25 Flange
- EN 1092-1 DIN Flange Supplier in Mumbai
- DIN Class 1500 Flange
- A182 DIN PN10-PN25 Raised Face Flanges
- Copper Nickel DIN Flanges Manufacturer
- Copper Nickel Raised Face DIN Flange
- DIN 2527 Plate Flanges
- High Quality DIN Flanges Supplier
- Carbon Steel DIN 2527 PN16 Flanges
- High Nickel Alloy Series A and B RTJ DIN 2566 Flange
- DIN PN10-PN25 Flange Price List
- Super Duplex 2507 DIN Flanges
- ANSI #150 DIN Flanges
- DIN 2566 Flange Class 400
- Alloy 20 DIN 2527 PN16 Plate Flanges Exporter
- DIN 2566 Flanges
- Titanium DIN 2527 PN16 Flange
- DIN 2527 PN25 Plate Flanges
- 254 SMO DIN 2527 PN40
- BS4504 PN16 DIN Flange
- Inconel DIN Flange
- DIN Inch Flanges
- JIS 16K DIN 2527 PN25 Flange
- DIN 2527 6A Flange
- Brass DIN 2527 PN25 Raised Face Flanges
- BS4504 Large Diameter DIN Flange
- DIN PN10-PN25 Flanges
- JIS B2220 5K 10K 16K DIN Flanges
- Hastelloy Raised Face DIN Flanges
DIN Flange Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay
