DSS S32205 Nuts, S31803 Duplex Steel Stud Bolts Manufacturer, UNS S32205 Fasteners, Duplex Steel S31803 Bolts, DIN 1.4462 Fasteners, Duplex UNS S32205 Washers Suppliers in India.
Victor Steel Corporation is an acknowledged manufacturer of Duplex S31803 Fasteners, which additionally unearths use in fasteners and different engine hardware in airframe assemblies and missile systems. Duplex Steel 2205 Nuts is specially used for production of drivers and distractors within the aerospace and clinical fields, for marine equipment, firearms, and hand tools, and for drill bits and shafts in oil and fueloline drilling machines. At temperatures over 1600°F (870°C), intergranular oxidation can occur. The corrosion resistance is excellent even after several cycles of extended temperature publicity, or regular publicity to temperatures of as much as 1900 Degree F (1038 Degree C). For the nice viable corrosion resistance, answer-dealt with material is encouraged.
Duplex S32205 Screws, Ferritic / Austenitic S31803 Flat Washers, Duplex S32205 Allen Cap Screw, Duplex S31803 Threaded Rod, 1.4462 Fasteners, DSS S32205 Nuts, Duplex Steel UNS S31803 Industrial Fasteners, UNS S32205 Carriage Bolts, Duplex Steel S31803 Anchor Bolts, Duplex Steel S32205 Hex Bolts Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For Duplex Steel S31803 Fasteners
- Different Forms of Duplex Steel S31803 Fasteners
- Equivalent Grade Chart Of Duplex Steel S31803 Fasteners
- Standards of Duplex Steel S31803 Fasteners
- Chemical Composition Of Duplex Steel S31803 Fasteners
- Mechanical Properties Of Duplex Steel S31803 Fasteners
- Size Chart of Duplex Steel S31803 Bolts
- Duplex Steel S31803 Nut Dimensions Metric
- Duplex Steel S31803 Washer Weight & Dimensions
- Duplex Steel S31803 Stud Bolt Size Chart
- Keep Bulk Stock Of Duplex Steel S31803 Fasteners
- Duplex Steel S31803 Fasteners Export to below Mentioned Countries
- Duplex Steel S31803 Fasteners Application Area
Due to these properties, Alloy 2205 Bolts unearths use in fueloline turbine engine additives and plane jet engines, inclusive of compressor disks, rotor disks, shafts, spacers, seals, rings, and casings. It is produced with the aid of using vacuum induction melting and vacuum arc refining, or with the aid of using vacuum induction melting and electroslag refining. It may be warm-labored within the temperature variety of 2140 Degree F - 1800 Degree F (1170 Degree C - 980 Degree C), and cold-labored with the aid of using hydroforming, drawing, spinning, bending, and rolling. That said, this nickel base alloy is tough to system and unique commands ought to be followed.
As for becoming a member of, Duplex Steel WNR 1.4462 Washers could be readily-welded handiest in cautiously managed situations with argon-arc strategies the use of the composition filler steel. That said, welds ought to be averted in high-pressure locations, because of the reality that the high strength of the welds is decrease than a warmth-dealt with material. More precisely, it is able to show “warm short” tendency and sensitivity to pressure cracking. That’s why; it is fantastically encouraged that welding is performed on a material this is handiest answer dealt with, after which re-answer dealt with collectively with the weld. Corrosion of this alloy is sort of a sluggish chemical or electrochemical assault on steel with the aid of using surroundings, moisture or different agents.
Standard Specification For Duplex Steel S31803 Fasteners
| Standard | ASTM B479, ASME SB479 |
|---|---|
| Size | M 02 to M 33 |
| Length | 3 mm to 200 mm |
| Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard: | DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
| Scope of Manufacturer |
|
| Dia | M6 to M64 (1/4" - 2.5") |
| Length | 12 MM - 500 MM (Upto 20 Inch) |
| IS | 1363, 1364 |
| DIN | 931, 933 |
| ISO | ISO 3506 |
| Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
| Head Drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
| Finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
| Production Process | M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element |
| Types | Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts |
Check Duplex Steel S32205 Hex Bolts From ½” Up To 4” In Diameter, M3 to M56 DSS S31803 Fasteners, Duplex S32205 Nuts Manufacturer India, View Updated Duplex Steel S31803 Hex Head, Heavy Hex Bolts & Cap Screws Price List In India.
Different Forms of Duplex Steel S31803 Fasteners
Equivalent Grade Chart Of Duplex Steel S31803 Fasteners
| STANDARD | WERKSTOFF NR. | UNS |
| Duplex S31803 | 1.4462 | S31803 |
Standards of Duplex Steel S31803 Fasteners
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
Chemical Composition Of Duplex Steel S31803 Fasteners
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| S31803 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
Mechanical Properties Of Duplex Steel S31803 Fasteners
| Tensile Strength, ksi | 0.2% Yield Strength, ksi | Elongation, % | Hardness [HRC] |
|---|---|---|---|
| 90 min | 65 min | 25 min | 293 max |
Size Chart of Duplex Steel S31803 Bolts
| Nominal or Basic Product Diameter | E | F | G | H | J | LT (Thread Length) | Y | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Body Diameter | Width Across Flats | Width Across Corners | Head Height | Wrenching Height | For Screw Lengths | For Screw Lengths | Transition Thread Length | ||||||||
| 1/4 | 0.25 | 0.25 | 0.245 | 7/16 | 0.438 | 0.428 | 0.505 | 0.488 | 5/32 | 0.163 | 0.150 | 0.106 | 0.750 | 1.000 | 0.250 |
| 5/16 | 0.3125 | 0.3125 | 0.3065 | 1/2 | 0.500 | 0.489 | 0.577 | 0.557 | 13/64 | 0.211 | 0.195 | 0.140 | 0.875 | 1.125 | 0.278 |
| 3/8 | 0.375 | 0.375 | 0.369 | 9/16 | 0.562 | 0.551 | 0.650 | 0.628 | 15/64 | 0.243 | 0.226 | 0.160 | 1.000 | 1.250 | 0.312 |
| 7/16 | 0.4375 | 0.4375 | 0.4305 | 5/8 | 0.625 | 0.612 | 0.722 | 0.698 | 9/32 | 0.291 | 0.272 | 0.195 | 1.125 | 1.375 | 0.357 |
| 1/2 | 0.5 | 0.5 | 0.493 | 3/4 | 0.750 | 0.736 | 0.866 | 0.840 | 5/16 | 0.323 | 0.302 | 0.215 | 1.250 | 1.500 | 0.385 |
| 9/16 | 0.5625 | 0.5625 | 0.5545 | 13/16 | 0.812 | 0.798 | 0.938 | 0.910 | 23/64 | 0.371 | 0.348 | 0.250 | 1.375 | 1.625 | 0.417 |
| 5/8 | 0.625 | 0.625 | 0.617 | 15/16 | 0.938 | 0.922 | 1.083 | 1.051 | 25/64 | 0.403 | 0.378 | 0.269 | 1.500 | 1.750 | 0.455 |
| 3/4 | 0.75 | 0.75 | 0.741 | 1-1/8 | 1.125 | 1.100 | 1.299 | 1.254 | 15/32 | 0.483 | 0.455 | 0.324 | 1.750 | 2.000 | 0.500 |
| 7/8 | 0.875 | 0.875 | 0.866 | 1-5/16 | 1.312 | 1.285 | 1.516 | 1.465 | 35/64 | 0.563 | 0.531 | 0.378 | 2.000 | 2.250 | 0.556 |
| 1 | 1 | 1 | 0.99 | 1-1/2 | 1.500 | 1.469 | 1.732 | 1.675 | 39/64 | 0.627 | 0.591 | 0.416 | 2.250 | 2.500 | 0.625 |
| 1-1/8 | 1.125 | 1.125 | 1.114 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 11/16 | 0.718 | 0.658 | 0.461 | 2.500 | 2.750 | 0.714 |
| 1-1/4 | 1.25 | 1.25 | 1.239 | 1-7/8 | 1.875 | 1.812 | 2.165 | 2.066 | 25/32 | 0.813 | 0.749 | 0.530 | 2.750 | 3.000 | 0.714 |
| 1-1/2 | 1.5 | 1.5 | 1.488 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 15/16 | 0.974 | 0.902 | 0.640 | 3.250 | 3.500 | 0.833 |
Duplex Steel S31803 Nut Dimensions Metric
| Nut Size | F | C | H | |||||
| Width Across Flats | Width Across Corners | Thickness | ||||||
| Basic | Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | |
| 1/2 | 3/4 | 0.750 | 0.736 | 0.866 | 0.840 | 7/16 | 0.448 | 0.427 |
| 5/8 | 15/16 | 0.938 | 0.922 | 1.083 | 1.051 | 35/64 | 0.559 | 0.535 |
| 3/4 | 11/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | 0.665 | 0.617 |
| 7/8 | 15/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | 0.776 | 0.724 |
| 1 | 11/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | 0.887 | 0.831 |
| 11/8 | 111/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | 0.999 | 0.939 |
| 11/4 | 17/8 | 1.875 | 1.812 | 2.165 | 2.066 | 11/16 | 1.094 | 1.030 |
| 13/8 | 21/16 | 2.062 | 1.994 | 2.382 | 2.273 | 111/64 | 1.206 | 1.138 |
| 11/2 | 21/4 | 2.250 | 2.175 | 2.598 | 2.480 | 19/32 | 1.317 | 1.245 |
Duplex Steel S31803 Washer Weight & Dimensions
| Bolt Size | A | B | C | Weight (lbs.) Per 100 Pieces |
| ID | OD | Thickness | ||
| 1/2 | 9/16 | 13/8 | 0.109 | 4 |
| 5/8 | 11/16 | 13/4 | 0.134 | 8 |
| 3/4 | 13/16 | 2 | 0.148 | 11 |
| 7/8 | 15/16 | 21/4 | 0.165 | 15 |
| 1 | 11/16 | 21/2 | 0.165 | 19 |
| 11/8 | 11/4 | 23/4 | 0.165 | 22 |
| 11/4 | 13/8 | 3 | 0.165 | 26 |
| 13/8 | 11/2 | 31/4 | 0.180 | 33 |
| 11/2 | 15/8 | 31/2 | 0.180 | 38 |
| 15/8 | 13/4 | 33/4 | 0.180 | 43 |
| 13/4 | 17/8 | 4 | 0.180 | 50 |
| 17/8 | 2 | 41/4 | 0.180 | 57 |
| 2 | 21/8 | 41/2 | 0.180 | 63 |
| 21/4 | 23/8 | 43/4 | 0.220 | 83 |
| 21/2 | 25/8 | 5 | 0.238 | 96 |
| 23/4 | 27/8 | 51/4 | 0.259 | 110 |
| 3 | 31/8 | 51/2 | 0.284 | 130 |
Duplex Steel S31803 Stud Bolt Size Chart
| Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
|---|---|---|---|---|---|---|---|---|
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
| 3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
| 1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
| 6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
| 12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
| 14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
| 16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
| 18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
| 20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
| 24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
| Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
| 2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
| 4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
| 5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
| 6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
| 8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
| 10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
| 12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
| 14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
| 16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
| 18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
| 20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
| 24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 | |
Keep Bulk Stock Of Duplex Steel S31803 Fasteners
- Duplex UNS S32205 Heavy Hex Nuts
- Duplex S31803 Eye Bolts
- Duplex Steel 2205 Hex Head Bolt
- UNS S31803 Fasteners Supplier in Mumbai
- ASTM B479 Duplex Steel S32205 Acorn Nuts
- S31803 Duplex Steel Anchor Bolts
- UNS S32205 Duplex Wing Nuts Stockists
- 1.4462 Tie Rods Supplier
- DSS S31803 Heavy Hex Bolts
- UNS S32205 Duplex Socket Cap Screw
- Duplex 1.4462 Fasteners
- Duplex UNS S32205 Nuts
- Duplex S31803 Wing Nuts
- Duplex S32205 Stud Bolts
- Grade S31803 Duplex Steel Elevator Bolt
- Duplex S32205 Double Ended Stud
- S31803 Duplex Steel Screws
- ASTM B479 Ferritic / Austenitic S32205 Coupling Nut
- Duplex S32205 Hex Set Screw
- Grade S32205 Duplex Steel Foundation Bolts
- Duplex Steel S31803 Bolts
- DSS S32205 Industrial Fasteners
- ANSI B18.2 Duplex Steel S32205 Carriage Bolt
- DSS S32205 Concrete Screw
- Duplex Steel S31803 Flange Bolt
- Duplex S32205 Square Nuts
- Duplex Steel S31803 Flange Lock Nut
- DIN 1.4462 Dock Washer
- ASTM B479 Duplex S32205 Hex Coupling Nut
- DSS S31803 Countersunk Washer
- Duplex S31803 Threaded Rod
- UNS S32205 Ogee Washer
- Duplex S31803 Self Locking Nuts
- Ferritic / Austenitic S32205 Machine Fasteners Supplier
- Duplex Steel S31803 Hex Head Bolts Exporter
- Duplex Steel S32205 Hex Washers
- ASTM B479 Duplex S31803 Structural Bolts
- 1.4462 Hex Domed Cap Nuts
- Duplex Steel S32205 Fasteners
- DSS S31803 Hexagonal Washer
- Duplex Steel S32205 Customized Washer
- Duplex UNS S32205 Flat Washers Manufacturer
- 1.4462 Split / Lock Washer
- Ferritic / Austenitic S32205 Allen Cap Screw Price List
- DSS S31803 Fender Washer in Mumbai, India
- S32205 Duplex Steel Machine Bolt
- ASTM B479 Duplex Steel S32205 Tooth Lock Washer
- Duplex Steel S32205 T-Head Bolts
- S31803 Duplex Steel Nyloc Nuts
- Duplex Steel 2205 Plain Washer
Duplex Steel S31803 Fasteners Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay
