Like us !
Stay Connected !
Follow us
Chat With us
Mail us

Alloy C22 Washers, UNS N06022 Fasteners, Hastelloy C22 Bolts, DIN 2.4602 Fasteners, C22 Hastelloy Stud Bolts Manufacturer, Hastelloy Alloy C22 Nuts Suppliers in India.

Victor Steel Corporation is a prominent manufacturer and exporter of Hastelloy Alloy C22 Fasteners, which is used extensively for digital components and different drawn applications. The bright cold rolled end for this Hastelloy Alloy C22 Fasteners is retained with the aid of using very last annealing in a managed ecosystem furnace. It isn't always hardenable with the aid of using warmness treatment. This alloy has most formability, good strength and corrosion resistance. This product presents beneficial resistance to corrosion on a huge variety of reasonably oxidizing to reasonably decreasing environments. This product may be welded the use of maximum of the resistance and fusion methods. Anneal for this product must be completed at 1850 Degree F – 2050 Degree F (1010 Degree C – 1121 Degree C), then water quench or fast air cool.

2.4602 Fasteners, Hastelloy C22 Anchor Bolts, Hastelloy® Alloy C22 Screws, Hastelloy C22 Hex Bolts, UNS N06022 Carriage Bolts, Nickel Alloy C22 Threaded Rod, Alloy C22 Allen Cap Screw, Alloy C22 Nuts, Hastelloy C22 Industrial Fasteners, Hastelloy Alloy C22 Flat Washers Manufacturer in Mumbai, India.

In many instances, the intermediate anneal may be removed while this product is used. Rapid cooling is vital for this Hastelloy Alloy UNS N06022 Fasteners to gain most corrosion resistance in completed parts. When ordering this product, word the deep drawing exceptional, as it will continue to be non-magnetic after cold work. Moreover, We Provide Proper Packaging Of this product In Order to Avoid Any Kind Of Damage. This product is used for welded products which are probably uncovered to situations that may purpose intergranular corrosion in service. This alloy may be drawn, spun, headed and blanked quite simply due mostly to its low work hardening charge.

This alloy is non-magnetic however will slowly emerge as so with increasing cold work. This technique is accompanied with the aid of using fast cooling for this product to gain most corrosion resistance. These Nickel Alloy WNR 2.4602 Fasteners is an excessive-alloy steels that have better corrosion resistance than different steels attributable to the presence of huge quantities of chromium. It is normally taken into consideration to have similar weldability. This alloy is utilized in warmth exchangers, piping, tanks and different procedure gadget in touch with sparkling water. Hot working of this alloy may be performed at 1149 Deg C to 1260 Deg C (2100 Deg F to 2300 Deg F).

Hastelloy C22 Fasteners

Standard Specification For Hastelloy C22 Fasteners

Standard ASTM B574, ASME SB574
Size M 02 to M 33
Length 3 mm to 200 mm
Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard: DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Stud Bolt length are defined in ASME B16.5 standard
  • Hex nuts are defined in ASME B18.2.2
  • ASME B18.5
  • BS en iso 3506

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards

Scope of Manufacturer
  • Up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia M6 to M64 (1/4" - 2.5")
Length 12 MM - 500 MM (Upto 20 Inch)
IS 1363, 1364
DIN 931, 933
ISO ISO 3506
Form of: Hex, Square, Round, Threading as per Gauge Etc.
Head Drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing: Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production Process M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Types Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts

Check Hastelloy C22 Hex Bolts From ½” Up To 4” In Diameter, M3 to M56 Alloy C22 Fasteners, Hastelloy Alloy C22 Nuts Manufacturer India, View Updated Hastelloy C22 Hex Head, Heavy Hex Bolts & Cap Screws Price List In India.

Different Forms of Hastelloy C22 Fasteners

Hastelloy C22 Bolts
Hastelloy C22 Bolts
Hastelloy C22 Nuts
Hastelloy C22 Nuts
Hastelloy C22 Screw
Hastelloy C22 Screw
Hastelloy C22 Washers
Hastelloy C22 Washers
Hastelloy C22 Threaded Rods
Hastelloy C22 Threaded Rods
Hastelloy C22 Stud Bolts
Hastelloy C22 Stud Bolts
Hastelloy C22 Anchor Bolts
Hastelloy C22 Anchor Bolts

Equivalent Grade Chart Of Hastelloy C22 Fasteners

STANDARD UNS WERKSTOFF NR. EN JIS
Hastelloy C22 N06022 2.4602 NiCr21Mo14W NW 6022

Standards of Hastelloy C22 Fasteners

Hexagon Bolt / Set Screws Stud Bolt Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693
DIN 553 BS 2470 Spring Washers
DIN 438 DIN 127
BS 4168 BS 4464
BS 1802

Standard Organizations

Chemical Composition Of Hastelloy C22 Fasteners

Grade C Mn Si S Co Ni Cr Fe Mo P
Alloy C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

Mechanical Properties Of Hastelloy C22 Fasteners

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Available Grades of Hastelloy Fasteners

Size Chart of Hastelloy C22 Bolts

Nominal or Basic Product Diameter E F G H J LT (Thread Length) Y
Body Diameter Width Across Flats Width Across Corners Head Height Wrenching Height For Screw Lengths For Screw Lengths Transition Thread Length
1/4 0.25 0.25 0.245 7/16 0.438 0.428 0.505 0.488 5/32 0.163 0.150 0.106 0.750 1.000 0.250
5/16 0.3125 0.3125 0.3065 1/2 0.500 0.489 0.577 0.557 13/64 0.211 0.195 0.140 0.875 1.125 0.278
3/8 0.375 0.375 0.369 9/16 0.562 0.551 0.650 0.628 15/64 0.243 0.226 0.160 1.000 1.250 0.312
7/16 0.4375 0.4375 0.4305 5/8 0.625 0.612 0.722 0.698 9/32 0.291 0.272 0.195 1.125 1.375 0.357
1/2 0.5 0.5 0.493 3/4 0.750 0.736 0.866 0.840 5/16 0.323 0.302 0.215 1.250 1.500 0.385
9/16 0.5625 0.5625 0.5545 13/16 0.812 0.798 0.938 0.910 23/64 0.371 0.348 0.250 1.375 1.625 0.417
5/8 0.625 0.625 0.617 15/16 0.938 0.922 1.083 1.051 25/64 0.403 0.378 0.269 1.500 1.750 0.455
3/4 0.75 0.75 0.741 1-1/8 1.125 1.100 1.299 1.254 15/32 0.483 0.455 0.324 1.750 2.000 0.500
7/8 0.875 0.875 0.866 1-5/16 1.312 1.285 1.516 1.465 35/64 0.563 0.531 0.378 2.000 2.250 0.556
1 1 1 0.99 1-1/2 1.500 1.469 1.732 1.675 39/64 0.627 0.591 0.416 2.250 2.500 0.625
1-1/8 1.125 1.125 1.114 1-11/16 1.688 1.631 1.949 1.859 11/16 0.718 0.658 0.461 2.500 2.750 0.714
1-1/4 1.25 1.25 1.239 1-7/8 1.875 1.812 2.165 2.066 25/32 0.813 0.749 0.530 2.750 3.000 0.714
1-1/2 1.5 1.5 1.488 2-1/4 2.250 2.175 2.598 2.480 15/16 0.974 0.902 0.640 3.250 3.500 0.833

Hastelloy C22 Nut Dimensions Metric

Nut Size F C H
Width Across Flats Width Across Corners Thickness
Basic Maximum Minimum Maximum Minimum Basic Maximum Minimum
1/2 3/4 0.750 0.736 0.866 0.840 7/16 0.448 0.427
5/8 15/16 0.938 0.922 1.083 1.051 35/64 0.559 0.535
3/4 11/8 1.125 1.088 1.299 1.240 41/64 0.665 0.617
7/8 15/16 1.312 1.269 1.516 1.447 3/4 0.776 0.724
1 11/2 1.500 1.450 1.732 1.653 55/64 0.887 0.831
11/8 111/16 1.688 1.631 1.949 1.859 31/32 0.999 0.939
11/4 17/8 1.875 1.812 2.165 2.066 11/16 1.094 1.030
13/8 21/16 2.062 1.994 2.382 2.273 111/64 1.206 1.138
11/2 21/4 2.250 2.175 2.598 2.480 19/32 1.317 1.245

Hastelloy C22 Washer Weight & Dimensions

Bolt Size A B C Weight (lbs.) Per 100 Pieces
ID OD Thickness
1/2 9/16 13/8 0.109 4
5/8 11/16 13/4 0.134 8
3/4 13/16 2 0.148 11
7/8 15/16 21/4 0.165 15
1 11/16 21/2 0.165 19
11/8 11/4 23/4 0.165 22
11/4 13/8 3 0.165 26
13/8 11/2 31/4 0.180 33
11/2 15/8 31/2 0.180 38
15/8 13/4 33/4 0.180 43
13/4 17/8 4 0.180 50
17/8 2 41/4 0.180 57
2 21/8 41/2 0.180 63
21/4 23/8 43/4 0.220 83
21/2 25/8 5 0.238 96
23/4 27/8 51/4 0.259 110
3 31/8 51/2 0.284 130

Hastelloy C22 Stud Bolt Size Chart

Class 150 Flanges ASME B16.5 (Stud bolt sizes) Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in
Ring Joint
1/2 3 1/2 2 3/8 5/8 4 1/2 2 1/4
3/4 3 7/8 2 3/4 5/8 4 1/2 2 1/2
1 4 1/4 3 1/8 5/8 4 1/2 2 1/2 3
1 1/4 4 5/8 3 1/2 5/8 4 1/2 2 3/4 3 1/4
1 1/2 5 3 7/8 5/8 4 1/2 2 3/4 3 1/4
2 6 4 3/4 3/4 4 5/8 3 1/4 3 3/4
2 1/2 7 5 1/2 3/4 4 5/8 3 1/2 4
3 7 1/2 6 3/4 4 5/8 3 1/2 4
3 1/2 8 1/2 7 3/4 8 5/8 3 1/2 4
4 9 7 1/2 3/4 8 5/8 3 1/2 4
5 10 8 1/2 7/8 8 3/4 3 3/4 4 1/4
6 11 9 1/2 7/8 8 3/4 4 4 1/2
8 13 1/2 11 3/4 7/8 8 3/4 4 1/4 4 3/4
10 16 14 3/4 1 12 7/8 4 1/2 5
12 19 17 1 12 7/8 4 3/4 5 1/4
14 21 18 3/4 1 1/8 12 1 5 1/4 5 3/4
16 23 1/2 21 1/4 1 1/8 16 1 5 1/4 5 3/4
18 25 22 3/4 1 1/4 16 1 1/8 5 3/4 6 1/4
20 27 1/2 25 1 1/4 20 1 1/8 6 1/4 6 3/4
24 32 29 1/2 1 1/4 20 1 1/4 6 3/4 7 1/4
Class 300 Flanges ASME B16.5 Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in
Ring Joint
1/2 3 3/4 2 5/8 5/8 4 1/2 2 1/2 3
3/4 4 5/8 3 1/4 3/4 4 5/8 3 3 1/2
1 4 7/8 3 1/2 3/4 4 5/8 3 3 1/2
1 1/4 5 1/4 3 7/8 3/4 4 5/8 3 1/4 3 3/4
1 1/2 6 1/8 4 1/2 7/8 4 3/4 3 1/2 4
2 6 1/2 5 3/4 8 5/8 3 1/2 4
2 1/2 7 1/2 5 7/8 7/8 8 3/4 4 4 1/2
3 8 1/4 6 5/8 7/8 8 3/4 4 1/4 4 3/4
3 1/2 9 7 1/4 7/8 8 3/4 4 1/4 5
4 10 7 7/8 7/8 8 3/4 4 1/2 5
5 11 9 1/4 7/8 8 3/4 4 3/4 5 1/4
6 12 1/2 10 5/8 7/8 12 3/4 4 3/4 5 1/2
8 15 13 1 12 7/8 5 1/2 6
10 17 1/2 15 1/4 1 1/8 16 1 6 1/4 6 3/4
12 20 1/2 17 3/4 1 1/4 16 1 1/8 6 3/4 7 1/4
14 23 20 1/4 1 1/4 20 1 1/8 7 7 1/2
16 25 1/2 22 1/2 1 3/8 20 1 1/4 7 1/2 8
18 28 24 3/4 1 3/8 24 1 1/4 7 3/4 8 1/4
20 30 1/2 27 1 3/8 24 1 1/4 8 8 3/4
24 36 32 1 5/8 24 1 1/2 9 10

Keep Bulk Stock Of Hastelloy C22 Fasteners

  • Alloy C22 Heavy Hex Bolts
  • C22 Hastelloy Screws
  • Hastelloy® Alloy C22 Double Ended Stud
  • Alloy C22 Industrial Fasteners
  • ASTM B574 Nickel Alloy C22 Coupling Nut
  • ASTM B574 Hastelloy C22 Acorn Nuts
  • C22 Hastelloy Anchor Bolts
  • Hastelloy® Alloy C22 Hex Set Screw
  • Hastelloy Alloy C22 Stud Bolts
  • Nickel Alloy C22 Heavy Hex Nuts
  • Alloy C22 Concrete Screw
  • UNS N06022 Hastelloy Wing Nuts Stockists
  • Hastelloy Alloy C22 Wing Nuts
  • Hastelloy C22 Flange Bolt
  • UNS N06022 Fasteners Supplier in Mumbai
  • Hastelloy C22 Bolts
  • Hastelloy C22 Hex Head Bolt
  • Hastelloy® Alloy C22 Eye Bolts
  • 2.4602 Tie Rods Supplier
  • Hastelloy 2.4602 Fasteners
  • Grade C22 Hastelloy Foundation Bolts
  • ANSI B18.2 Hastelloy C22 Carriage Bolt
  • Nickel Alloy C22 Nuts
  • UNS N06022 Hastelloy Socket Cap Screw
  • Grade C22 Hastelloy Elevator Bolt
  • 2.4602 Hex Domed Cap Nuts
  • Nickel Alloy C22 Allen Cap Screw Price List
  • Hastelloy C22 Fasteners
  • Hastelloy C22 Hex Washers
  • DIN 2.4602 Dock Washer
  • Hastelloy C22 Customized Washer
  • Hastelloy C22 Flat Washers Manufacturer
  • Hastelloy C22 Hex Head Bolts Exporter
  • UNS N06022 Ogee Washer
  • Nickel Alloy C22 Machine Fasteners Supplier
  • Hastelloy C22 T-Head Bolts
  • Hastelloy C22 Plain Washer
  • C22 Hastelloy Nyloc Nuts
  • Hastelloy Alloy C22 Self Locking Nuts
  • ASTM B574 Hastelloy C22 Tooth Lock Washer
  • Hastelloy® Alloy C22 Threaded Rod
  • Hastelloy Alloy C22 Square Nuts
  • 2.4602 Split / Lock Washer
  • C22 Hastelloy Machine Bolt
  • ASTM B574 Hastelloy Alloy C22 Hex Coupling Nut
  • Alloy C22 Fender Washer in Mumbai, India
  • Alloy C22 Countersunk Washer
  • Alloy C22 Hexagonal Washer
  • Hastelloy C22 Flange Lock Nut
  • ASTM B574 Hastelloy® Alloy C22 Structural Bolts

Hastelloy C22 Fasteners Export to below Mentioned Countries


MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus

AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon

NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark

EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta

ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia

SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay

Industry
Call Us And get it done!

We Have 25+ Years Industrial Experience

Have a question? call us now

+91 98672 64038

Drop us an Email

sales@victorfittings.com

We are open on

Mon - Sat 09:00 - 07:00Sunday - Closed