UNS N06600 Pipe Flanges, Inconel 600 Weld Neck Flanges, Inconel 600 Flanges, ASTM B564 Inconel 600 Blind Flanges Manufacturer, Inconel Alloy 600 Slip On Flange Suppliers in India.
Victor Steel Corporation is a prominent manufacturer of Inconel Alloy 600 Flanges, which are very flexible and might consequently be observed in a huge variety of sectors. Inconel Alloy UNS N06600 Slip On Flanges has an outstanding capability to face up to excessive strain and a huge spectrum of temperatures. It’s cap-potential to become ‘passive’ manner that it can also guard itself towards corrosion and oxidation, in lots of special conditions together by means of water, in air or even in acidic environments. Some product and technology applications of include: Seawater additives, Flare stacks, Aircraft ducting structures, Specialised seawater device, Chemical manner device, Turbine shroud rings, Engine thrust-reverser structures, Jet engine exhaust structures, and so on. They are the maximum strong and enduring materials this is additionally flexible sufficient in order that it may be utilized in a huge range of applications.
ANSI B16.5 Inconel 600 Forged Flanges, Inconel 600 WNRF Flange Dealer, Inconel 600 Spectacle Blind Flanges, DIN 2.4816 Threaded Flanges, Inconel® Alloy 600 Orifice Flange, ASME SB564 Inconel 600 RTJ Flanges, Nickel Alloy 600 Socket weld Flanges, Inconel Alloy 600 Lap Joint Flange, ASTM B564 Inconel 600 SORF Flanges Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For Inconel 600 Flanges
- Different Forms of Inconel 600 Flanges
- Equivalent Grade Chart Of Inconel 600 Flanges
- Manufacturing Standards / Pressure Rating of ASTM B564 Alloy 600 Pipe Flanges
- Chemical Composition Of Inconel 600 Flanges
- Mechanical Properties Of Inconel 600 Flanges
- Dimensions of Inconel 600 Flanges
- Weight Chart of Inconel 600 Flanges
- Keep Bulk Stock Of Inconel 600 Flanges
- Inconel 600 Flanges Export to below Mentioned Countries
- Inconel 600 Flanges Application Area
Inconel Alloy WNR 2.4816 Socket Weld Flanges became initially developed; a few adjustments had been made which have enabled it to be a good deal greater weldable and ‘creep-resistant’. And these ‘Creep -Resistant’ is in which a solid material actions or deforms very slowly however completely beneath the have an impact on of chronic mechanical strain. These adjustments have allowed for use in a much wider variety of applications, together within the chemical processing enterprise and to make pumps, valves and different excessive-stress device within the marine and nuclear industries.
We recognise the significance of providing Nickel Alloy 600 Forged Flanges which are excessive performers in harsh environments. We supply products to a number of the main agencies round the arena who want to recognise that their device will supply outcomes. This is why we supply and supply these products – we recognise that they could stand the check of time. It is a pipe without a seam or a weld joint. They are concept in order to resist better stress, better temperatures, better mechanical strain and a corrosive atmosphere. Our giant inventory holdings suggest that we're capable of deliver customers by means of these products speedy and efficiently, anywhere they're required.
Standard Specification For Inconel 600 Flanges
| Specifications | ASTM B564 / ASME SB564 |
|---|---|
| Flanges size | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Flanges Dimensions | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange, GOST Flange. |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Manufacturing Standards | ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, BS Flange, EN Flange, API 6A Flange etc B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) Any other specilised Flange DIN: DIN 2527, DIN 2566, DIN 2573, UNS S45367 Flange, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276 |
| Standard UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Flanges uses & application | Nuclear power (mostly seamless). Petrochemicals and acids. Bitumen upgraders. Heavy oil refineries. |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175. | |
Check ASTM B564 Alloy 600 Ring Type Joint Flanges, DIN 2.4816 EN 1092 1 Alloy 600 Slip On Flange, PN40/ PN6/ PN10 Flanges, Inconel Alloy 600 Flanges Manufacturer India, View Updated Inconel 600 Socket Weld Flanges Price List In India.
Different Forms of Inconel 600 Flanges
Equivalent Grade Chart Of Inconel 600 Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | SUS 600 | 600S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
Manufacturing Standards / Pressure Rating of ASTM B564 Alloy 600 Pipe Flanges
| ASME/ANSI B 16.5 | Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Blind Flange [Series A & B],Welding Neck Flange |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| ASME/ANSI B 16.36 | Slip on Flange, Threaded Flange, Welding Neck Flange, |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| BS 4504 SEC 3.1 | Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| BS 1560 BOSS | Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
| TABLE | D, E, F, H |
| DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
Chemical Composition Of Inconel 600 Pipe Flanges
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Mechanical Properties Of Inconel 600 Flanges
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Dimensions of Inconel 600 Flanges
| Normal Pipe Size | Flanges Diameter ('O') |
Diameter of (B.C.) 'A' |
Diameter of (B.H.) 'D' |
Holes Number |
Flanges Wall Thickness 'C' |
Diameter (Flanges) at Weld Bevel | (Flanges) Diameter of Hub 'E' |
Length Of Through Hub | Bore ('B') | Diameter of (RF) R |
Depth of Socket Weld F |
Threading Length |
||||
| SORF/ SWRF (Y) |
WNRF (Y) |
Lap Joit (Y) |
SORF/ SWRF (B) |
Lap Joit (B) |
||||||||||||
| 1/2'' | 15 | 95.2 | 66.7 | 15.9 | 4 | 14.3 | 21.3 | 38.1 | 22.2 | 52.4 | 22.2 | 22.3 | 22.9 | 34.9 | 9.5 | 15.9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/4'' | 20 | 117.5 | 82.5 | 19.0 | 4 | 15.9 | 26.7 | 47.6 | 25.4 | 57.1 | 25.4 | 27.7 | 28.2 | 42.9 | 11.1 | 15.9 |
| 1'' | 25 | 123.8 | 88.9 | 19.0 | 4 | 17.5 | 33.5 | 54.0 | 27.0 | 61.9 | 27.0 | 34.5 | 35.0 | 50.8 | 12.7 | 17.5 |
| 1 | 32 | 133.3 | 98.4 | 19.0 | 4 | 20.6 | 42.2 | 63.5 | 28.6 | 66.7 | 28.6 | 43.2 | 43.7 | 63.5 | 14.3 | 20.6 |
| 1 | 40 | 155.6 | 114.3 | 22.2 | 4 | 22.2 | 48.3 | 69.8 | 31.7 | 69.8 | 31.7 | 49.5 | 50.0 | 73.0 | 15.9 | 22.2 |
| 2'' | 50 | 165.1 | 127.0 | 19.0 | 8 | 25.4 | 60.4 | 84.1 | 36.5 | 73.0 | 36.5 | 62.0 | 62.5 | 92.1 | 17.5 | 25.4 |
| 2 | 65 | 190.5 | 149.2 | 22.2 | 8 | 28.6 | 73.1 | 100.0 | 41.3 | 79.4 | 41.3 | 74.7 | 75.4 | 104.8 | 19.0 | 28.6 |
| 3'' | 80 | 209.5 | 168.3 | 22.2 | 8 | 31.8 | 88.9 | 117.5 | 46.0 | 82.5 | 46.0 | 90.7 | 91.4 | 127.0 | - | 30.2 |
| 3 | 90 | 228.5 | 184.2 | 22.2 | 8 | 34.9 | 101.6 | 133.4 | 49.3 | 85.7 | 49.3 | 103.4 | 104.1 | 140.0 | - | 31.7 |
| 4'' | 100 | 273.0 | 215.9 | 25.4 | 8 | 38.1 | 114.3 | 152.4 | 54.0 | 101.6 | 54.0 | 116.1 | 116.8 | 157.2 | - | 33.3 |
| 5'' | 125 | 330.2 | 266.7 | 28.6 | 8 | 44.4 | 141.2 | 188.9 | 60.3 | 114.3 | 60.3 | 143.8 | 144.5 | 185.7 | - | 36.5 |
| 6'' | 150 | 355.6 | 292.1 | 28.6 | 12 | 47.6 | 168.4 | 222.2 | 66.7 | 117.5 | 66.7 | 170.7 | 171.4 | 215.9 | - | 39.7 |
| 8'' | 200 | 419.1 | 349.2 | 31.7 | 12 | 55.6 | 219.2 | 273.0 | 76.2 | 133.3 | 76.2 | 221.5 | 222.2 | 269.9 | - | 44.4 |
| 10'' | 250 | 508.0 | 431.8 | 34.9 | 16 | 63.5 | 273.0 | 342.9 | 85.7 | 152.4 | 111.2 | 276.3 | 277.4 | 323.8 | - | 49.2 |
| 12'' | 300 | 558.8 | 488.9 | 34.9 | 20 | 66.7 | 323.8 | 400.0 | 92.1 | 155.6 | 117.3 | 327.1 | 328.2 | 381.0 | - | 55.6 |
| 14'' | 350 | 603.2 | 527.0 | 38.1 | 20 | 69.9 | 355.6 | 431.8 | 93.7 | 165.1 | 127.0 | 359.1 | 360.2 | 412.7 | - | 57.1 |
| 16'' | 400 | 685.8 | 603.2 | 41.3 | 20 | 76.2 | 406.4 | 495.3 | 106.4 | 177.8 | 139.7 | 410.5 | 411.2 | 469.9 | - | 63.5 |
| 18'' | 450 | 742.9 | 654.0 | 44.4 | 24 | 82.6 | 457.2 | 546.1 | 117.5 | 184.1 | 152.4 | 461.8 | 462.3 | 533.4 | - | 68.3 |
| 20'' | 500 | 812.8 | 723.9 | 44.4 | 24 | 88.9 | 508.0 | 609.6 | 127.0 | 190.5 | 165.1 | 513.1 | 514.3 | 584.2 | - | 73.0 |
| 24'' | 600 | 939.8 | 838.2 | 50.8 | 24 | 101.6 | 609.6 | 717.5 | 139.7 | 203.2 | 184.1 | 615.9 | 615.9 | 692.1 | - | 82.5 |
Weight Chart of Inconel 600 Flanges
| Pressure Class | Nominal Size Of Pipe (NPS) In Inch | Slip On (SORF) In Inch | Threaded (NPT) In Inch | Socket Weld (SWRF) In Inch | Lap Joint (LOOSE) In Inch | Blind (BLRF) In Inch | Weld Neck (WNRF) In Inch |
|---|---|---|---|---|---|---|---|
| Class 150 Flanges | ½ | 1 | 1 | 2 | 1 | 2 | 2 |
| ¾ | 2 | 2 | 2 | 2 | 2 | 2 | |
| 1 | 2 | 2 | 2 | 2 | 2 | 3 | |
| 1¼ | 3 | 3 | 3 | 3 | 3 | 3 | |
| 1½ | 3 | 3 | 3 | 3 | 4 | 4 | |
| 2 | 5 | 5 | 5 | 5 | 5 | 6 | |
| 2½ | 8 | 8 | 8 | 8 | 7 | 10 | |
| 3 | 9 | 9 | 9 | 9 | 9 | 11.5 | |
| 3½ | 11 | 12 | 11 | 11 | 13 | 12 | |
| 4 | 13 | 13 | 13 | 13 | 17 | 16.5 | |
| 5 | 15 | 15 | 15 | 15 | 20 | 21 | |
| 6 | 19 | 19 | 19 | 19 | 27 | 26 | |
| 8 | 30 | 30 | 30 | 30 | 47 | 42 | |
| 10 | 43 | 43 | 43 | 43 | 70 | 54 | |
| 12 | 64 | 64 | 64 | 64 | 123 | 88 | |
| 14 | 90 | 90 | 90 | 105 | 140 | 114 | |
| 16 | 106 | 98 | 98 | 140 | 180 | 140 | |
| 18 | 130 | 130 | 130 | 160 | 220 | 165 | |
| 20 | 165 | 165 | 165 | 195 | 285 | 197 | |
| 22 | 185 | 185 | 185 | 245 | 355 | 225 | |
| 24 | 220 | 220 | 220 | 275 | 430 | 268 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 300 Flanges | ½ | 2 | 2 | 3 | 2 | 2 | 2 |
| ¾ | 3 | 3 | 3 | 3 | 3 | 3 | |
| 1 | 3 | 3 | 3 | 3 | 4 | 4 | |
| 1¼ | 4.5 | 4.5 | 4 | 4.5 | 6 | 5 | |
| 1½ | 6.5 | 6.5 | 6 | 6.5 | 7 | 7 | |
| 2 | 7 | 7 | 7 | 7 | 8 | 9 | |
| 2½ | 10 | 10 | 10 | 10 | 12 | 12 | |
| 3 | 13 | 14 | 13 | 14.5 | 16 | 18 | |
| 3½ | 17 | 17 | 17 | 17 | 21 | 20 | |
| 4 | 23.5 | 24 | 22 | 24 | 28 | 26.5 | |
| 5 | 29 | 31 | 28 | 28 | 37 | 36 | |
| 6 | 39 | 39 | 39 | 39 | 50 | 45 | |
| 8 | 58 | 58 | 58 | 58 | 81 | 69 | |
| 10 | 81 | 81 | 81 | 91 | 124 | 100 | |
| 12 | 115 | 115 | 115 | 140 | 185 | 142 | |
| 14 | 165 | 165 | 165 | 190 | 250 | 206 | |
| 16 | 210 | 220 | 190 | 234 | 315 | 250 | |
| 18 | 253 | 280 | 250 | 305 | 414 | 320 | |
| 20 | 315 | 325 | 315 | 375 | 515 | 400 | |
| 22 | 370 | 370 | 370 | 435 | 640 | 465 | |
| 24 | 490 | 490 | 475 | 550 | 800 | 580 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 400 Flanges | ½ | 2 | 2 | 2 | 2 | 2 | 3 |
| ¾ | 3 | 3 | 3 | 3 | 3 | 3.5 | |
| 1 | 3.5 | 3.5 | 3.5 | 3.5 | 4 | 4 | |
| 1¼ | 4.5 | 4.5 | 4.5 | 4.5 | 6 | 4.5 | |
| 1½ | 6.5 | 6.5 | 6.5 | 6.5 | 8 | 8 | |
| 2 | 8 | 8 | 8 | 8 | 10 | 10 | |
| 2½ | 12 | 12 | 12 | 11 | 15 | 14 | |
| 3 | 15 | 15 | 15 | 14 | 20 | 18 | |
| 3½ | 21 | 21 | 21 | 20 | 29 | 26 | |
| 4 | 26 | 26 | 26 | 25 | 33 | 35 | |
| 5 | 31 | 31 | 31 | 29 | 44 | 43 | |
| 6 | 44 | 44 | 44 | 42 | 61 | 57 | |
| 8 | 67 | 67 | 67 | 64 | 100 | 89 | |
| 10 | 91 | 91 | 91 | 110 | 155 | 125 | |
| 12 | 130 | 130 | 130 | 152 | 226 | 175 | |
| 14 | 191 | 191 | 191 | 210 | 310 | 233 | |
| 16 | 253 | 253 | 253 | 280 | 398 | 295 | |
| 18 nbsp; | 310 | 310 | 310 | 345 | 502 | 360 | |
| 20 | 378 | 378 | 378 | 420 | 621 | 445 | |
| 22 | 405 | 405 | 405 | 455 | 720 | 505 | |
| 24 | 539 | 539 | 539 | 615 | 936 | 640 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 600 Flanges | ½ | 2 | 2 | 2 | 2 | 3 | 3 |
| ¾ | 3 | 3 | 3 | 3 | 4 | 4 | |
| 1 | 4 | 4 | 4 | 4 | 4 | 4 | |
| 1¼ | 5 | 5 | 5 | 5 | 6 | 6 | |
| 1½ | 7 | 7 | 7 | 7 | 8 | 8 | |
| 2 | 9 | 9 | 9 | 9 | 10 | 12 | |
| 2½ | 13 | 13 | 13 | 12 | 15 | 18 | |
| 3 | 16 | 16 | 16 | 15 | 20 | 23 | |
| 3½ | 21 | 21 | 21 | 20 | 29 | 26 | |
| 4 | 37 | 37 | 37 | 36 | 41 | 42 | |
| 5 | 63 | 63 | 63 | 63 | 68 | 68 | |
| 6 | 80 | 80 | 80 | 78 | 86 | 81 | |
| 8 | 115 | 15 | 15 | 112 | 140 | 120 | |
| 10 | 177 | 177 | 177 | 195 | 231 | 190 | |
| 12 | 215 | 215 | 215 | 240 | 295 | 226 | |
| 14 | 259 | 259 | 259 | 290 | 378 | 347 | |
| 16 | 366 | 366 | 366 | 400 | 527 | 481 | |
| 18 | 476 | 476 | 476 | 469 | 665 | 555 | |
| 20 | 612 | 612 | 612 | 604 | 855 | 690 | |
| 22 | 590 | 590 | 590 | 670 | 1000 | 720 | |
| 24 | 876 | 876 | 876 | 866 | 1250 | 977 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 900 Flanges | ½ | 6 | 6 | 6 | 6 | 4 | 7 |
| ¾ | 6 | 6 | 6 | 6 | 6 | 7 | |
| 1 | 7.5 | 7.5 | 7.5 | 7.5 | 9 | 8.5 | |
| 1¼ | 10 | 10 | 10 | 10 | 10 | 10 | |
| 1½ | 14 | 14 | 14 | 14 | 14 | 14 | |
| 2 | 22 | 22 | 22 | 21 | 25 | 24 | |
| 2½ | 31 | 31 | 31 | 25 | 32 | 31 | |
| 3 | 36 | 36 | 36 | 29 | 35 | 36 | |
| 4 | 53 | 53 | 53 | 51 | 54 | 53 | |
| 5 | 83 | 83 | 83 | 81 | 87 | 86 | |
| 6 | 110 | 110 | 110 | 105 | 115 | 110 | |
| 8 | 172 | 172 | 172 | 190 | 200 | 187 | |
| 10 | 245 | 245 | 245 | 277 | 290 | 268 | |
| 12 | 326 | 326 | 326 | 371 | 415 | 372 | |
| 14 | 400 | 400 | 400 | 415 | 520 | 562 | |
| 16 | 459 | 459 | 459 | 488 | 619 | 685 | |
| 18 | 647 | 647 | 647 | 670 | 880 | 924 | |
| 20 | 792 | 792 | 792 | 868 | 1107 | 1164 | |
| 24 | 1480 | 1480 | 1480 | 1659 | 2099 | 2107 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 1500 Flanges | ½ | 6 | 6 | 6 | 6 | 4 | 7 |
| ¾ | 6 | 6 | 6 | 6 | 6 | 7 | |
| 1 | 8 | 8 | 8 | 8 | 9 | 9 | |
| 1¼ | 10 | 10 | 10 | 10 | 10 | 10 | |
| 1½ | 14 | 14 | 14 | 14 | 14 | 14 | |
| 2 | 25 | 25 | 25 | 25 | 25 | 25 | |
| 2½ | 36 | 36 | 36 | 35 | 35 | 36 | |
| 3 | 48 | 48 | 48 | 47 | 48 | 48 | |
| 4 | 73 | 73 | 73 | 75 | 73 | 73 | |
| 5 | 132 | 132 | 132 | 140 | 140 | 132 | |
| 6 | 165 | 165 | 165 | 170 | 160 | 165 | |
| 8 | 260 | 260 | 260 | 286 | 302 | 275 | |
| 10 | 436 | 436 | 436 | 485 | 510 | 455 | |
| 12 | 667 | 667 | 667 | 749 | 775 | 690 | |
| 14 | 940 | 940 | 940 | 890 | 975 | 940 | |
| 16 | 1250 | 1250 | 1250 | 1250 | 1300 | 1250 | |
| 18 | 1625 | 1625 | 1625 | 1475 | 1750 | 1625 | |
| 20 | 2050 | 2050 | 2050 | 1775 | 2225 | 2050 | |
| 24 | 2825 | 2825 | 2825 | 2825 | 3625 | 3325 | |
| Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
| Class 2500 Flanges | ½ | …. | 7 | …. | 7 | 7 | 8 |
| ¾ | …. | 9 | …. | 8 | 10 | 9 | |
| 1 | …. | 12 | …. | 12 | 12 | 13 | |
| 1¼ | …. | 18 | …. | 17 | 18 | 20 | |
| 1½ | …. | 25 | …. | 24 | 25 | 28 | |
| 2 | …. | 38 | …. | 37 | 39 | 42 | |
| 2½ | …. | 55 | …. | 53 | 56 | 52 | |
| 3 | …. | 83 | …. | 80 | 86 | 94 | |
| 4 | …. | 127 | …. | 122 | 133 | 146 | |
| 5 | …. | 210 | …. | 204 | 223 | 244 | |
| 6 | …. | 323 | …. | 314 | 345 | 378 | |
| 8 | …. | 485 | …. | 471 | 533 | 576 | |
| 10 | …. | 925 | …. | 897 | 1025 | 1068 | |
| 12 | …. | 1300 | …. | 1262 | 1464 | 1608 |
Keep Bulk Stock Of Inconel 600 Flanges
- UNS N06600 Flanges Supplier in Mumbai
- Alloy 600 Welding Neck Flanges
- Nickel Alloy 600 Threaded Flanges
- ASTM B564 Inconel Alloy Lap Joint Flanges
- Alloy 600 Pipe Flanges
- ASME B16.5 Inconel 600 Socket weld Flanges
- ANSI B16.5 Alloy 600 RTJ Flanges
- ASTM B564 Inconel 600 Flanges
- Inconel 600 Slip on Flanges
- Inconel® Alloy Loose Flanges
- ASTM B564 Inconel Alloy 600 BLRF Flange Flanges
- Inconel 600 Forged Flanges
- Alloy 600 Long Weld Neck Flanges
- ASTM B564 Inconel 600 Square Flanges
- 600 Inconel Blind Flange
- Inconel 600 Orifice Flanges
- ASTM B564 Inconel 600 Screwed Flanges
- Inconel 600 BS 4504 Flanges
- Alloy 600 Raised Face Flanges Stockist
- Inconel® Alloy Nippo Flange Manufacturer
- Inconel 600 PN 10 Flanges
- Inconel 600 High Hub Blind Flanges
- DIN 2.4816 Orifice Flange
- Alloy 600 Ring Type Joint Flanges
- Inconel 600 Large Diameter Flanges Exporter
- ASME SB564 Alloy 600 SWRF Flange
- Nickel Alloy 600 Lap Joint Flanges
- Inconel 600 SORF Flanges
- Inconel® Alloy 600 Plate Flanges
- Alloy 600 Male & Female Flanges
- Alloy 600 AWWA C207 Flange Manufacturer in Mumbai, India
- Inconel 600 Raised Face Flanges
- Inconel® Alloy 600 Reducing Flanges
- Inconel 600 WNRF Flange
- Inconel 600 Spectacle Blind Flanges
- Inconel Alloy 600 BLRF Flange Supplier
- Inconel 600 Reducing Flanges Price List
- Alloy 600 Expander Flanges
Inconel 600 Flanges Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay
