Titanium Gr 2 Washers, UNS R50400 Fasteners, Grade 2 Titanium Stud Bolts Manufacturer, Titanium Alloy Gr 2 Bolts, DIN 3.7035 Fasteners, Ti Alloy Gr 2 Nuts Suppliers in India.
Victor Steel Corporation is a prominent supplier and trader of Titanium Alloy Grade 2 Fasteners, which is an alloy that offers excessive strength and desirable ductility while cold worked. Titanium Alloy UNS R50400 Fasteners is utilized in springs, truck and trailer bodies, railway and subway automobiles are a number of the major applications for this flexible grade. For intermediate annealing a low temperature variety is selected for this product, due to the fact thermal hardening does now no longer in shape this grade of steel. One of the four commercially pure titanium alloys, Grade 2 titanium has a strong resistance to oxidation.
UNS R50400 Carriage Bolts, Titanium Gr 2 Nuts, Titanium Alloy Gr 2 Industrial Fasteners, Titanium Grade 2 Threaded Rod, Grade 2 Titanium Flat Washers, Titanium Gr 2 Screws, Titanium Alloy Gr 2 Anchor Bolts, 3.7035 Fasteners, Ti Alloy Gr 2 Allen Cap Screw, Grade 2 Titanium Hex Bolts Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For Titanium Gr 2 Fasteners
- Different Forms of Titanium Gr 2 Fasteners
- Equivalent Grade Chart Of Titanium Gr 2 Fasteners
- Standards of Titanium Gr 2 Fasteners
- Chemical Composition Of Titanium Gr 2 Fasteners
- Mechanical Properties Of Titanium Gr 2 Fasteners
- Size Chart of Titanium Gr 2 Bolts
- Titanium Gr 2 Nut Dimensions Metric
- Titanium Gr 2 Washer Weight & Dimensions
- Titanium Gr 2 Stud Bolt Size Chart
- Keep Bulk Stock Of Titanium Gr 2 Fasteners
- Titanium Gr 2 Fasteners Export to below Mentioned Countries
- Titanium Gr 2 Fasteners Application Area
The first-rate corrosion resistance for this Titanium Alloy WNR 3.7035 Fasteners is received within the annealed condition. After that for strain relieving, this product is heated to 500 degree Fahrenheit – 900 degree Fahrenheit after which the material is cooled in air. Solution Treatment (Annealing) Heat for this product is as much as 1010 Degree C – 1120 Degree C and funky rapidly. Annealing of Heat for this alloy is as much as 1900 Degree F – 2050 Degree F (1038 Degree C – 1121 Degree C), after which water quench. The work hardening rates of these this alloy is very excessive, within the variety of growth consistent by means of having one percentage discount in vicinity of cold work. Titanium grade 2 is also known as commercially pure or CP titanium is not alloyed.A characteristic of Titanium Grade 2 Fasteners is its higher content of elements like iron and oxygen as compared to other CP grades.
Standard Specification For Titanium Gr 2 Fasteners
Standard
ASTM B348, ASME SB348
Size
M 02 to M 33
Length
3 mm to 200 mm
Threads:
METRIC, BSW, BSF, UNC, UNF or as required
Standard:
DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
- ANSI B 18.2.4 2M
- ANSI B 28.2.4 1M
- Stud Bolt length are defined in ASME B16.5 standard
- Hex nuts are defined in ASME B18.2.2
- ASME B18.5
- BS en iso 3506
DIN: DIN 931, DIN 933, DIN 934, DIN 970
UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF
ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards
Scope of Manufacturer
- Up to M36 / 1-1/2” Dia, up to 1100mm lg
- CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia
M6 to M64 (1/4" - 2.5")
Length
12 MM - 500 MM (Upto 20 Inch)
IS
1363, 1364
DIN
931, 933
ISO
ISO 3506
Form of:
Hex, Square, Round, Threading as per Gauge Etc.
Head Drive:
Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate:
Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing:
Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production Process
M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Types
Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts
Check Titanium Gr 2 Hex Bolts From ½” Up To 4” In Diameter, M3 to M56 Titanium Alloy Gr 2 Fasteners, Grade 2 Titanium Nuts Manufacturer India, View Updated Titanium Grade 2 Hex Head, Heavy Hex Bolts & Cap Screws Price List In India.
Different Forms of Titanium Gr 2 Fasteners
Titanium Gr 2 Bolts
Titanium Gr 2 Nuts
Titanium Gr 2 Screw
Titanium Gr 2 Washers
Titanium Gr 2 Threaded Rods
Titanium Gr 2 Stud Bolts
Titanium Gr 2 Anchor Bolts
Equivalent Grade Chart Of Titanium Gr 2 Fasteners
STANDARD
WERKSTOFF NR.
UNS
Gr 5
3.7035
R50400
Standards of Titanium Gr 2 Fasteners
Hexagon Bolt / Set Screws
Stud Bolt
Hexagon Nuts
Socket Cap screws
DIN 931
BS4882
DIN 934
DIN 912
DIN 933
DIN 976
BS 1768
DIN 6912
BS 1768
BS 1769
DIN 7984
UNI 5731
BS 1083
ANSI B18.3
UNI 5739
BS 3692
ISO 4762
ISO 4014
ISO 4032
UNI 5931
ISO 4017
ISO 4033
BS 2470
BS 1769
ANSI B18.2.2
BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws
Socket & Slotted Countersunk Screws
Studs
Washers
DIN 913
DIN 963
DIN 938
DIN 125
DIN 914
DIN 7991
DIN 939
DIN 9021
DIN 915
BS 4168
DIN 2510
BS 4320
DIN 916
BS 1981
BS 4439
BS 3410
DIN 551
BS 483
BS 2693
DIN 553
BS 2470
Spring Washers
DIN 438
DIN 127
BS 4168
BS 4464
BS 1802
Standard Organizations
ASTM
DIN
JIS
EN
ASME
AISI
Chemical Composition Of Titanium Gr 2 Fasteners
Grade
Ti
C
Fe
H
N
O
Ti Grade2
99.2 min
0.1 max
0.3 max
0.015 max
0.03 max
0.25 max
Mechanical Properties Of Titanium Gr 2 Fasteners
Element
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
Titanium Gr 2
4.5 g/cm3
1665 °C (3030 °F)
Psi – 49900 , MPa – 344
Psi – 39900 , MPa – 275
20 %
Size Chart of Titanium Gr 2 Bolts
Nominal or Basic Product Diameter
E
F
G
H
J
LT (Thread Length)
Y
Body Diameter
Width Across Flats
Width Across Corners
Head Height
Wrenching Height
For Screw Lengths
For Screw Lengths
Transition Thread Length
1/4
0.25
0.25
0.245
7/16
0.438
0.428
0.505
0.488
5/32
0.163
0.150
0.106
0.750
1.000
0.250
5/16
0.3125
0.3125
0.3065
1/2
0.500
0.489
0.577
0.557
13/64
0.211
0.195
0.140
0.875
1.125
0.278
3/8
0.375
0.375
0.369
9/16
0.562
0.551
0.650
0.628
15/64
0.243
0.226
0.160
1.000
1.250
0.312
7/16
0.4375
0.4375
0.4305
5/8
0.625
0.612
0.722
0.698
9/32
0.291
0.272
0.195
1.125
1.375
0.357
1/2
0.5
0.5
0.493
3/4
0.750
0.736
0.866
0.840
5/16
0.323
0.302
0.215
1.250
1.500
0.385
9/16
0.5625
0.5625
0.5545
13/16
0.812
0.798
0.938
0.910
23/64
0.371
0.348
0.250
1.375
1.625
0.417
5/8
0.625
0.625
0.617
15/16
0.938
0.922
1.083
1.051
25/64
0.403
0.378
0.269
1.500
1.750
0.455
3/4
0.75
0.75
0.741
1-1/8
1.125
1.100
1.299
1.254
15/32
0.483
0.455
0.324
1.750
2.000
0.500
7/8
0.875
0.875
0.866
1-5/16
1.312
1.285
1.516
1.465
35/64
0.563
0.531
0.378
2.000
2.250
0.556
1
1
1
0.99
1-1/2
1.500
1.469
1.732
1.675
39/64
0.627
0.591
0.416
2.250
2.500
0.625
1-1/8
1.125
1.125
1.114
1-11/16
1.688
1.631
1.949
1.859
11/16
0.718
0.658
0.461
2.500
2.750
0.714
1-1/4
1.25
1.25
1.239
1-7/8
1.875
1.812
2.165
2.066
25/32
0.813
0.749
0.530
2.750
3.000
0.714
1-1/2
1.5
1.5
1.488
2-1/4
2.250
2.175
2.598
2.480
15/16
0.974
0.902
0.640
3.250
3.500
0.833
Titanium Gr 2 Nut Dimensions Metric
Nut Size
F
C
H
Width Across Flats
Width Across Corners
Thickness
Basic
Maximum
Minimum
Maximum
Minimum
Basic
Maximum
Minimum
1/2
3/4
0.750
0.736
0.866
0.840
7/16
0.448
0.427
5/8
15/16
0.938
0.922
1.083
1.051
35/64
0.559
0.535
3/4
11/8
1.125
1.088
1.299
1.240
41/64
0.665
0.617
7/8
15/16
1.312
1.269
1.516
1.447
3/4
0.776
0.724
1
11/2
1.500
1.450
1.732
1.653
55/64
0.887
0.831
11/8
111/16
1.688
1.631
1.949
1.859
31/32
0.999
0.939
11/4
17/8
1.875
1.812
2.165
2.066
11/16
1.094
1.030
13/8
21/16
2.062
1.994
2.382
2.273
111/64
1.206
1.138
11/2
21/4
2.250
2.175
2.598
2.480
19/32
1.317
1.245
Titanium Gr 2 Washer Weight & Dimensions
Bolt Size
A
B
C
Weight (lbs.) Per 100 Pieces
ID
OD
Thickness
1/2
9/16
13/8
0.109
4
5/8
11/16
13/4
0.134
8
3/4
13/16
2
0.148
11
7/8
15/16
21/4
0.165
15
1
11/16
21/2
0.165
19
11/8
11/4
23/4
0.165
22
11/4
13/8
3
0.165
26
13/8
11/2
31/4
0.180
33
11/2
15/8
31/2
0.180
38
15/8
13/4
33/4
0.180
43
13/4
17/8
4
0.180
50
17/8
2
41/4
0.180
57
2
21/8
41/2
0.180
63
21/4
23/8
43/4
0.220
83
21/2
25/8
5
0.238
96
23/4
27/8
51/4
0.259
110
3
31/8
51/2
0.284
130
Titanium Gr 2 Stud Bolt Size Chart
Class 150 Flanges ASME B16.5 (Stud bolt sizes)
Length of Stud Bolts
NPS
Outside Diameter of Flange
The diameter of Bolt Circle
The diameter of Bolt Holes
Number of Bolts
Diameter of Bolts
Raised Face
0.06 in
Ring Joint
1/2
3 1/2
2 3/8
5/8
4
1/2
2 1/4
–
3/4
3 7/8
2 3/4
5/8
4
1/2
2 1/2
–
1
4 1/4
3 1/8
5/8
4
1/2
2 1/2
3
1 1/4
4 5/8
3 1/2
5/8
4
1/2
2 3/4
3 1/4
1 1/2
5
3 7/8
5/8
4
1/2
2 3/4
3 1/4
2
6
4 3/4
3/4
4
5/8
3 1/4
3 3/4
2 1/2
7
5 1/2
3/4
4
5/8
3 1/2
4
3
7 1/2
6
3/4
4
5/8
3 1/2
4
3 1/2
8 1/2
7
3/4
8
5/8
3 1/2
4
4
9
7 1/2
3/4
8
5/8
3 1/2
4
5
10
8 1/2
7/8
8
3/4
3 3/4
4 1/4
6
11
9 1/2
7/8
8
3/4
4
4 1/2
8
13 1/2
11 3/4
7/8
8
3/4
4 1/4
4 3/4
10
16
14 3/4
1
12
7/8
4 1/2
5
12
19
17
1
12
7/8
4 3/4
5 1/4
14
21
18 3/4
1 1/8
12
1
5 1/4
5 3/4
16
23 1/2
21 1/4
1 1/8
16
1
5 1/4
5 3/4
18
25
22 3/4
1 1/4
16
1 1/8
5 3/4
6 1/4
20
27 1/2
25
1 1/4
20
1 1/8
6 1/4
6 3/4
24
32
29 1/2
1 1/4
20
1 1/4
6 3/4
7 1/4
Class 300 Flanges ASME B16.5
Length of Stud Bolts
NPS
Outside Diameter of Flange
The diameter of Bolt Circle
The diameter of Bolt Holes
Number of Bolts
Diameter of Bolts
Raised Face
0.06 in
Ring Joint
1/2
3 3/4
2 5/8
5/8
4
1/2
2 1/2
3
3/4
4 5/8
3 1/4
3/4
4
5/8
3
3 1/2
1
4 7/8
3 1/2
3/4
4
5/8
3
3 1/2
1 1/4
5 1/4
3 7/8
3/4
4
5/8
3 1/4
3 3/4
1 1/2
6 1/8
4 1/2
7/8
4
3/4
3 1/2
4
2
6 1/2
5
3/4
8
5/8
3 1/2
4
2 1/2
7 1/2
5 7/8
7/8
8
3/4
4
4 1/2
3
8 1/4
6 5/8
7/8
8
3/4
4 1/4
4 3/4
3 1/2
9
7 1/4
7/8
8
3/4
4 1/4
5
4
10
7 7/8
7/8
8
3/4
4 1/2
5
5
11
9 1/4
7/8
8
3/4
4 3/4
5 1/4
6
12 1/2
10 5/8
7/8
12
3/4
4 3/4
5 1/2
8
15
13
1
12
7/8
5 1/2
6
10
17 1/2
15 1/4
1 1/8
16
1
6 1/4
6 3/4
12
20 1/2
17 3/4
1 1/4
16
1 1/8
6 3/4
7 1/4
14
23
20 1/4
1 1/4
20
1 1/8
7
7 1/2
16
25 1/2
22 1/2
1 3/8
20
1 1/4
7 1/2
8
18
28
24 3/4
1 3/8
24
1 1/4
7 3/4
8 1/4
20
30 1/2
27
1 3/8
24
1 1/4
8
8 3/4
24
36
32
1 5/8
24
1 1/2
9
10
Keep Bulk Stock Of Titanium Gr 2 Fasteners
- UNS R50400 Fasteners Supplier in Mumbai
- Titanium Gr 2 Double Ended Stud
- Titanium Grade 2 Nuts
- Titanium 3.7035 Fasteners
- Titanium Gr 2 Flange Bolt
- ANSI B18.5 Titanium Gr 2 Carriage Bolt
- Titanium Gr 2 Hex Head Bolt
- 3.7035 Tie Rods Supplier
- Ti Alloy Gr 2 Hex Set Screw
- UNS R50400 Titanium Socket Cap Screw
- Grade Grade 2 Titanium Foundation Bolts
- Grade Grade 2 Titanium Elevator Bolt
- UNS R50400 Titanium Wing Nuts Stockists
- Grade 2 Titanium Anchor Bolts
- Ti Alloy Gr 2 Concrete Screw
- Titanium Alloy Gr 2 Stud Bolts
- Titanium Gr 2 Bolts
- Ti Alloy Gr 2 Industrial Fasteners
- Titanium Grade 2 Heavy Hex Nuts
- Grade 2 Titanium Screws
- ASTM B348 Titanium Gr 2 Coupling Nut
- ASTM B348 Titanium Gr 2 Acorn Nuts
- Titanium Gr 2 Heavy Hex Bolts
- Titanium Alloy Gr 2 Wing Nuts
- Ti Alloy Gr 2 Eye Bolts
- Titanium Gr 2 Fasteners
- Titanium Alloy Gr 2 Square Nuts
- Grade 2 Titanium Nyloc Nuts
- Ti Alloy Gr 2 Threaded Rod
- Ti Alloy Gr 2 Countersunk Washer
- Titanium Gr 2 Customized Washer
- Titanium Gr 2 Hex Washers
- Titanium Gr 2 Flat Washers Manufacturer
- Titanium Grade 2 Allen Cap Screw Price List
- Titanium Gr 2 T-Head Bolts
- Titanium Gr 2 Flange Lock Nut
- UNS R50400 Ogee Washer
- Titanium Alloy Gr 2 Self Locking Nuts
- Titanium Grade 2 Machine Fasteners Supplier
- Titanium Gr 2 Plain Washer
- Ti Alloy Gr 2 Hexagonal Washer
- Ti Alloy Gr 2 Fender Washer in Mumbai, India
- Grade 2 Titanium Machine Bolt
- 3.7035 Hex Domed Cap Nuts
- Titanium Gr 2 Hex Head Bolts Exporter
- ASTM B348 Titanium Gr 2 Tooth Lock Washer
- 3.7035 Titanium Split / Lock Washer
- ASTM B348 Titanium Alloy Gr 2 Hex Coupling Nut
- ASTM B348 Ti Alloy Gr 2 Structural Bolts
- DIN 3.7035 Dock Washer
Titanium Gr 2 Fasteners Export to below Mentioned Countries

Table of Contents
- Standard Specification For Titanium Gr 2 Fasteners
- Different Forms of Titanium Gr 2 Fasteners
- Equivalent Grade Chart Of Titanium Gr 2 Fasteners
- Standards of Titanium Gr 2 Fasteners
- Chemical Composition Of Titanium Gr 2 Fasteners
- Mechanical Properties Of Titanium Gr 2 Fasteners
- Size Chart of Titanium Gr 2 Bolts
- Titanium Gr 2 Nut Dimensions Metric
- Titanium Gr 2 Washer Weight & Dimensions
- Titanium Gr 2 Stud Bolt Size Chart
- Keep Bulk Stock Of Titanium Gr 2 Fasteners
- Titanium Gr 2 Fasteners Export to below Mentioned Countries
- Titanium Gr 2 Fasteners Application Area
The first-rate corrosion resistance for this Titanium Alloy WNR 3.7035 Fasteners is received within the annealed condition. After that for strain relieving, this product is heated to 500 degree Fahrenheit – 900 degree Fahrenheit after which the material is cooled in air. Solution Treatment (Annealing) Heat for this product is as much as 1010 Degree C – 1120 Degree C and funky rapidly. Annealing of Heat for this alloy is as much as 1900 Degree F – 2050 Degree F (1038 Degree C – 1121 Degree C), after which water quench. The work hardening rates of these this alloy is very excessive, within the variety of growth consistent by means of having one percentage discount in vicinity of cold work. Titanium grade 2 is also known as commercially pure or CP titanium is not alloyed.A characteristic of Titanium Grade 2 Fasteners is its higher content of elements like iron and oxygen as compared to other CP grades.

Standard Specification For Titanium Gr 2 Fasteners
Standard | ASTM B348, ASME SB348 |
---|---|
Size | M 02 to M 33 |
Length | 3 mm to 200 mm |
Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: | DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
Scope of Manufacturer |
|
Dia | M6 to M64 (1/4" - 2.5") |
Length | 12 MM - 500 MM (Upto 20 Inch) |
IS | 1363, 1364 |
DIN | 931, 933 |
ISO | ISO 3506 |
Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
Head Drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
Finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
Production Process | M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element |
Types | Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts |
Check Titanium Gr 2 Hex Bolts From ½” Up To 4” In Diameter, M3 to M56 Titanium Alloy Gr 2 Fasteners, Grade 2 Titanium Nuts Manufacturer India, View Updated Titanium Grade 2 Hex Head, Heavy Hex Bolts & Cap Screws Price List In India.







STANDARD | WERKSTOFF NR. | UNS |
Gr 5 | 3.7035 | R50400 |
Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
---|---|---|---|
DIN 931 | BS4882 | DIN 934 | DIN 912 |
DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
BS 1768 | BS 1769 | DIN 7984 | |
UNI 5731 | BS 1083 | ANSI B18.3 | |
UNI 5739 | BS 3692 | ISO 4762 | |
ISO 4014 | ISO 4032 | UNI 5931 | |
ISO 4017 | ISO 4033 | BS 2470 | |
BS 1769 | ANSI B18.2.2 | BS 4168 | |
BS 3692 | |||
ANSI B18.2.1 | |||
Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
DIN 913 | DIN 963 | DIN 938 | DIN 125 |
DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
DIN 916 | BS 1981 | BS 4439 | BS 3410 |
DIN 551 | BS 483 | BS 2693 | |
DIN 553 | BS 2470 | Spring Washers | |
DIN 438 | DIN 127 | ||
BS 4168 | BS 4464 | ||
BS 1802 |
Grade | Ti | C | Fe | H | N | O |
Ti Grade2 | 99.2 min | 0.1 max | 0.3 max | 0.015 max | 0.03 max | 0.25 max |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Titanium Gr 2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
Nominal or Basic Product Diameter | E | F | G | H | J | LT (Thread Length) | Y | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Body Diameter | Width Across Flats | Width Across Corners | Head Height | Wrenching Height | For Screw Lengths | For Screw Lengths | Transition Thread Length | ||||||||
1/4 | 0.25 | 0.25 | 0.245 | 7/16 | 0.438 | 0.428 | 0.505 | 0.488 | 5/32 | 0.163 | 0.150 | 0.106 | 0.750 | 1.000 | 0.250 |
5/16 | 0.3125 | 0.3125 | 0.3065 | 1/2 | 0.500 | 0.489 | 0.577 | 0.557 | 13/64 | 0.211 | 0.195 | 0.140 | 0.875 | 1.125 | 0.278 |
3/8 | 0.375 | 0.375 | 0.369 | 9/16 | 0.562 | 0.551 | 0.650 | 0.628 | 15/64 | 0.243 | 0.226 | 0.160 | 1.000 | 1.250 | 0.312 |
7/16 | 0.4375 | 0.4375 | 0.4305 | 5/8 | 0.625 | 0.612 | 0.722 | 0.698 | 9/32 | 0.291 | 0.272 | 0.195 | 1.125 | 1.375 | 0.357 |
1/2 | 0.5 | 0.5 | 0.493 | 3/4 | 0.750 | 0.736 | 0.866 | 0.840 | 5/16 | 0.323 | 0.302 | 0.215 | 1.250 | 1.500 | 0.385 |
9/16 | 0.5625 | 0.5625 | 0.5545 | 13/16 | 0.812 | 0.798 | 0.938 | 0.910 | 23/64 | 0.371 | 0.348 | 0.250 | 1.375 | 1.625 | 0.417 |
5/8 | 0.625 | 0.625 | 0.617 | 15/16 | 0.938 | 0.922 | 1.083 | 1.051 | 25/64 | 0.403 | 0.378 | 0.269 | 1.500 | 1.750 | 0.455 |
3/4 | 0.75 | 0.75 | 0.741 | 1-1/8 | 1.125 | 1.100 | 1.299 | 1.254 | 15/32 | 0.483 | 0.455 | 0.324 | 1.750 | 2.000 | 0.500 |
7/8 | 0.875 | 0.875 | 0.866 | 1-5/16 | 1.312 | 1.285 | 1.516 | 1.465 | 35/64 | 0.563 | 0.531 | 0.378 | 2.000 | 2.250 | 0.556 |
1 | 1 | 1 | 0.99 | 1-1/2 | 1.500 | 1.469 | 1.732 | 1.675 | 39/64 | 0.627 | 0.591 | 0.416 | 2.250 | 2.500 | 0.625 |
1-1/8 | 1.125 | 1.125 | 1.114 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 11/16 | 0.718 | 0.658 | 0.461 | 2.500 | 2.750 | 0.714 |
1-1/4 | 1.25 | 1.25 | 1.239 | 1-7/8 | 1.875 | 1.812 | 2.165 | 2.066 | 25/32 | 0.813 | 0.749 | 0.530 | 2.750 | 3.000 | 0.714 |
1-1/2 | 1.5 | 1.5 | 1.488 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 15/16 | 0.974 | 0.902 | 0.640 | 3.250 | 3.500 | 0.833 |
Nut Size | F | C | H | |||||
Width Across Flats | Width Across Corners | Thickness | ||||||
Basic | Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | |
1/2 | 3/4 | 0.750 | 0.736 | 0.866 | 0.840 | 7/16 | 0.448 | 0.427 |
5/8 | 15/16 | 0.938 | 0.922 | 1.083 | 1.051 | 35/64 | 0.559 | 0.535 |
3/4 | 11/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | 0.665 | 0.617 |
7/8 | 15/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | 0.776 | 0.724 |
1 | 11/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | 0.887 | 0.831 |
11/8 | 111/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | 0.999 | 0.939 |
11/4 | 17/8 | 1.875 | 1.812 | 2.165 | 2.066 | 11/16 | 1.094 | 1.030 |
13/8 | 21/16 | 2.062 | 1.994 | 2.382 | 2.273 | 111/64 | 1.206 | 1.138 |
11/2 | 21/4 | 2.250 | 2.175 | 2.598 | 2.480 | 19/32 | 1.317 | 1.245 |
Bolt Size | A | B | C | Weight (lbs.) Per 100 Pieces |
ID | OD | Thickness | ||
1/2 | 9/16 | 13/8 | 0.109 | 4 |
5/8 | 11/16 | 13/4 | 0.134 | 8 |
3/4 | 13/16 | 2 | 0.148 | 11 |
7/8 | 15/16 | 21/4 | 0.165 | 15 |
1 | 11/16 | 21/2 | 0.165 | 19 |
11/8 | 11/4 | 23/4 | 0.165 | 22 |
11/4 | 13/8 | 3 | 0.165 | 26 |
13/8 | 11/2 | 31/4 | 0.180 | 33 |
11/2 | 15/8 | 31/2 | 0.180 | 38 |
15/8 | 13/4 | 33/4 | 0.180 | 43 |
13/4 | 17/8 | 4 | 0.180 | 50 |
17/8 | 2 | 41/4 | 0.180 | 57 |
2 | 21/8 | 41/2 | 0.180 | 63 |
21/4 | 23/8 | 43/4 | 0.220 | 83 |
21/2 | 25/8 | 5 | 0.238 | 96 |
23/4 | 27/8 | 51/4 | 0.259 | 110 |
3 | 31/8 | 51/2 | 0.284 | 130 |
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
---|---|---|---|---|---|---|---|---|
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
- UNS R50400 Fasteners Supplier in Mumbai
- Titanium Gr 2 Double Ended Stud
- Titanium Grade 2 Nuts
- Titanium 3.7035 Fasteners
- Titanium Gr 2 Flange Bolt
- ANSI B18.5 Titanium Gr 2 Carriage Bolt
- Titanium Gr 2 Hex Head Bolt
- 3.7035 Tie Rods Supplier
- Ti Alloy Gr 2 Hex Set Screw
- UNS R50400 Titanium Socket Cap Screw
- Grade Grade 2 Titanium Foundation Bolts
- Grade Grade 2 Titanium Elevator Bolt
- UNS R50400 Titanium Wing Nuts Stockists
- Grade 2 Titanium Anchor Bolts
- Ti Alloy Gr 2 Concrete Screw
- Titanium Alloy Gr 2 Stud Bolts
- Titanium Gr 2 Bolts
- Ti Alloy Gr 2 Industrial Fasteners
- Titanium Grade 2 Heavy Hex Nuts
- Grade 2 Titanium Screws
- ASTM B348 Titanium Gr 2 Coupling Nut
- ASTM B348 Titanium Gr 2 Acorn Nuts
- Titanium Gr 2 Heavy Hex Bolts
- Titanium Alloy Gr 2 Wing Nuts
- Ti Alloy Gr 2 Eye Bolts
- Titanium Gr 2 Fasteners
- Titanium Alloy Gr 2 Square Nuts
- Grade 2 Titanium Nyloc Nuts
- Ti Alloy Gr 2 Threaded Rod
- Ti Alloy Gr 2 Countersunk Washer
- Titanium Gr 2 Customized Washer
- Titanium Gr 2 Hex Washers
- Titanium Gr 2 Flat Washers Manufacturer
- Titanium Grade 2 Allen Cap Screw Price List
- Titanium Gr 2 T-Head Bolts
- Titanium Gr 2 Flange Lock Nut
- UNS R50400 Ogee Washer
- Titanium Alloy Gr 2 Self Locking Nuts
- Titanium Grade 2 Machine Fasteners Supplier
- Titanium Gr 2 Plain Washer
- Ti Alloy Gr 2 Hexagonal Washer
- Ti Alloy Gr 2 Fender Washer in Mumbai, India
- Grade 2 Titanium Machine Bolt
- 3.7035 Hex Domed Cap Nuts
- Titanium Gr 2 Hex Head Bolts Exporter
- ASTM B348 Titanium Gr 2 Tooth Lock Washer
- 3.7035 Titanium Split / Lock Washer
- ASTM B348 Titanium Alloy Gr 2 Hex Coupling Nut
- ASTM B348 Ti Alloy Gr 2 Structural Bolts
- DIN 3.7035 Dock Washer
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay