Duplex Steel S31803 Star Washers, DIN 1.4462 Industrial Washers, UNS S32205 Spring Washers, UNS S31803 Washers, DSS S32205 Flat Washers Manufacturer, Duplex 2205 Washers Suppliers in India.
Victor Steel Corporation is an acknowledged distributor of Duplex S31803 Washers, where preheating for this alloy is like is a time period used to explain heating carried out as an initial to a few similarly thermal or mechanical remedy. Deep Drawing for this Duplex Steel 2205 Sealing Washers is the procedure of cold working sheet or strip metallic blanks by way of dies on a press into shapes that are commonly cuplike in man or woman and regarding extensive plastic deformation of the metallic. Dry Rolled Finish for this alloy is an end received by means of cold rolling on polished rolls without using any coolant or metallic lubricant, material formerly simple pickled, giving a burnished look. In this metallic, the ductility within the path of rolling is sort of two times that at proper angles to the path of rolling.
Duplex Steel S31803 Machine Washer, Duplex Grade S32205 Lock Washers, UNS S31803 Split Washer, Duplex Stainless Steel S32205 Square Washer, SAF 2205 Ogee Washers, UNS S31803 Belleville Washers, Duplex Steel S32205 Fender Washer, UNS S31803 Dome Washers Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For Duplex Steel S31803 Washers
- Different Forms of Duplex Grade S32205 Washers
- Equivalent Grade Chart Of UNS S31803 Washers
- Chemical Composition Of Duplex Steel S32205 Washers
- Mechanical Properties Of Duplex Grade S31803 Washers
- Size Chart of UNS S32205 Washers
- Dimensions of Duplex Steel S31803 Spring Washer
- Weight Chart Of Duplex Grade S32205 Washers
- Keep Bulk Stock Of UNS S31803 Washers
- Duplex Steel S31803 Washers Export to below Mentioned Countries
- Duplex Grade S32205 Washers Application Area
Elongation is a boom in period that takes place whilst an Alloy 2205 Split Washers is subjected to strain however has now no longer fractured. Extrusion procedure is like shaping a metallic into a designated non-stop shape by means of forcing it thru a die of suitable shape. Finishes is the surface look of the metallic after very last remedy. Finishing Temperature is the temperature of very last warm working of a metallic. Full Annealing of this alloy is used mainly on iron and metallic, method heating the metallic to approximately 100°F above the crucial temperature variety, observed by means of “soaking” and sluggish cooling under the crucial temperature.
However, Full Hard Temper for this Duplex Steel WNR 1.4462 Slot Washers is like in low carbon sheet or strip metallic, stiff and springy, now no longer appropriate for bending in any path. It is the toughest mood available by means of difficult cold rolling. Galling is like the harmful of one or each metal surfaces by means of elimination of debris from localized regions because of seizure curing sliding friction. Grain for this alloy is like person crystals in metals. It is a strong many-sided crystal along with agencies of atoms sure collectively in an ordinary geometric pattern.
Standard Specification For UNS S31803 / S32205 Washers
| Specification | ASTM A193 / ASME SA193 |
|---|---|
| Size | M02 to M33, Custom Sizes |
| Length | 3 mm to 200 mm |
| Washer | UNF, BSW, BSF, METRIC, UNC, or as required |
| Types | Fender Washer, Ogee Washer, Countersunk Washer, Hex Washers, Dome Washer, Plain / Flat Washer, Split / Lock Washer, Customized Washer, Tooth Lock Washer, Tab Washers, Dock Washer, Dome Tooth Washer, Spring Washers, Square Washer, Hexagonal Washer |
| Standard | DIN 125A, DIN 125B, DIN 127B, DIN 137B, DIN 6797A, DIN 6797J, ISO 7089, DIN 7980, DIN 127 B, IS 2016, ASTM F436M, ASME B18.13, ASME B18.21.1, ASME B18.22.1, ASME B18.23.1 |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
| Surface Coating | Ptfe Coated Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Check Duplex Steel S32205 Washers From 0.062 to 12 inch In Diameter, M10 to M36 Duplex Grade S32205 Plain Washer, UNS S31803 Lock Washer Manufacturer India, View Updated Duplex Grade S32205 Square Fender Washer & Spring Washers Price List In India.
Different Forms of UNS S31803 / S32205 Washers
Equivalent Grade Chart Of Duplex Steel S31803 / S32205 Washers
| STANDARD | WERKSTOFF NR. | UNS |
| Duplex 2205 | 1.4462 | S31803 / S32205 |
Chemical Composition Of Duplex Steel S31803 / S32205 Washers
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| S31803 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
| S32205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
Mechanical Properties Of Duplex Steel S31803 / S32205 Washers
| Tensile Strength, ksi | 0.2% Yield Strength, ksi | Elongation, % | Hardness [HRC] |
|---|---|---|---|
| 90 min | 65 min | 25 min | 293 max |
Size Chart of Duplex Steel S31803 / S32205 Washers
| Size | USS | SAE | ||||
|---|---|---|---|---|---|---|
| Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
|
| #2 | – | – | – | 3/32″ | 1/4″ | 0.020″ |
| #4 | – | – | – | 1/8″ | 5/16″ | 0.032″ |
| #6 | – | – | – | 5/32″ | 3/8″ | 0.049″ |
| #8 | – | – | – | 3/16″ | 7/16″ | 0.049″ |
| #10 | – | – | – | 7/32″ | 1/2″ | 0.049″ |
| #12 | – | – | – | 1/4″ | 9/16″ | 0.065″ |
| 1/4″ | 5/16″ | 0.734″ | 0.065″ | 9/32″ | 5/8″ | 0.065″ |
| 5/16″ | 3/8″ | 7/8″ | 0.083″ | 11/32″ | 11/16″ | 0.065″ |
| 3/8″ | 7/16″ | 1″ | 0.083″ | 13/32″ | 13/16″ | 0.065″ |
| 7/16″ | 1/2″ | 1-1/4″ | 0.083″ | 15/32″ | 15/16″ | 0.065″ |
| 1/2″ | 9/16″ | 1-3/8″ | 0.109″ | 17/32″ | 1-1/16″ | 0.095″ |
| 9/16″ | 5/8″ | 1-15/32″ | 0.109″ | 19/32″ | 1-5/32″ | 0.095″ |
| 5/8″ | 11/16″ | 1-3/4″ | 0.134″ | 21/32″ | 1-5/16″ | 0.095″ |
| 3/4″ | 13/16″ | 2″ | 0.148″ | 13/16″ | 1-15/32″ | 0.134″ |
| 7/8″ | 15/16″ | 2-1/4″ | 0.165″ | 15/16″ | 1-3/4″ | 0.134″ |
| 1″ | 1-1/16″ | 2-1/2″ | 0.165″ | 1-1/16″ | 2″ | 0.134″ |
| 1-1/8″ | 1-1/4″ | 2-3/4″ | 0.165″ | – | – | – |
| 1-1/4″ | 1-3/8″ | 3″ | 0.165″ | – | – | – |
| 1-3/8″ | 1-1/2″ | 3-1/4″ | 0.180″ | – | – | – |
| 1-1/2″ | 1-5/8″ | 3-1/2″ | 0.180″ | – | – | – |
| 1-5/8″ | 1-3/4″ | 3-3/4″ | 0.180″ | – | – | – |
| 1-3/4″ | 1-7/8″ | 4″ | 0.180″ | – | – | – |
| 2″ | 2-1/8″ | 4-1/2″ | 0.213″ | – | – | – |
Dimensions of UNS S31803 / S32205 Spring Washer
| NOM SIZE | Inner Dia (d) Basic Tol (+) | Outer Dia (d1) Max | WIDTH (b) Basic Tol (+ or -) | THICKNESS (S) Basic Tol (+ or -) | Weight per 1000 in Kgs | |||
| 3 | 3.1 | 0.3 | 6.2 | 1.3 | 0.1 | 0.8 | 0.1 | 0.11 |
| 4 | 4.1 | 0.3 | 7.6 | 1.5 | 0.1 | 0.9 | 0.1 | 0.18 |
| 5 | 5.1 | 0.3 | 9.2 | 1.8 | 0.1 | 1.2 | 0.1 | 0.36 |
| 6 | 6.1 | 0.4 | 11.8 | 2.5 | 0.15 | 1.6 | 0.1 | 0.83 |
| 8 | 8.1 | 0.4 | 14.8 | 3 | 0.15 | 2 | 0.1 | 1.60 |
| 10 | 10.2 | 0.5 | 18.1 | 3.5 | 0.2 | 2.2 | 0.15 | 2.53 |
| 12 | 12.2 | 0.5 | 21.1 | 4 | 0.2 | 2.5 | 0.15 | 3.82 |
| 14 | 14.2 | 0.5 | 24.1 | 4.5 | 0.2 | 3 | 0.15 | 6.01 |
| 16 | 16.2 | 0.8 | 27.4 | 5 | 0.2 | 3.5 | 0.2 | 8.91 |
| 18 | 18.2 | 0.8 | 29.4 | 5 | 0.2 | 3.5 | 0.2 | 9.73 |
| 20 | 20.2 | 1 | 33.6 | 6 | 0.2 | 4 | 0.2 | 15.20 |
| 22 | 22.5 | 1 | 35.9 | 6 | 0.2 | 4 | 0.2 | 16.50 |
| 24 | 24.5 | 1 | 40 | 7 | 0.25 | 5 | 0.2 | 26.20 |
| 27 | 27.5 | 1 | 43 | 7 | 0.25 | 5 | 0.2 | 28.70 |
| 30 | 30.5 | 1.2 | 48.2 | 8 | 0.25 | 6 | 0.2 | 44.30 |
| 33 | 33.5 | 1.2 | 55.2 | 10 | 0.25 | 6 | 0.2 | 63.00 |
| 36 | 36.5 | 1.2 | 58.2 | 10 | 0.25 | 6 | 0.2 | 67.30 |
| 39 | 39.5 | 1.2 | 61.2 | 10 | 0.25 | 6 | 0.2 | 71.70 |
| 42 | 42.5 | 1.2 | 68.2 | 12 | 0.25 | 7 | 0.25 | 111.00 |
| 45 | 45.5 | 1.2 | 71.2 | 12 | 0.25 | 7 | 0.25 | 117.00 |
| 48 | 49 | 1.5 | 75 | 12 | 0.25 | 7 | 0.25 | 123.00 |
| 52 | 53 | 1.5 | 83 | 14 | 0.25 | 8 | 0.25 | 320.00 |
Weight Chart Of Duplex Steel S31803 / S32205 Washers
| APPROX. WEIGHT IN KGS FOR 100 NOS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE | TAPER | WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
| M-3 | 0.01 | 0.01 | |||||||||
| M-4 | 0.02 | 0.02 | |||||||||
| M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
| M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
| M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
| M-14 | 0.82 | 0.60 | 0.38 | ||||||||
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
| M-18 | 1.27 | 0.97 | 0.66 | ||||||||
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
| M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
| M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
| M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
| M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
| M-52 | 31.90 | 33.00 | 18.20 | ||||||||
| M-56 | 47.90 | 19.30 | |||||||||
| M-60 | 51.60 | 20.30 | |||||||||
| M-64 | 55.40 | 21.80 | |||||||||
| M-68 | 57.40 | ||||||||||
| M-72 | 63.40 | 24.00 | |||||||||
Keep Bulk Stock Of Duplex Steel S31803 / S32205 Washers
- Duplex Grade S31803 Spring Washers
- Duplex Steel S32205 Fender Washer
- 1.4462 Washer Supplier
- Duplex 2205 Washers
- UNS S32205 Split / Lock Washer
- Duplex Stainless Steel S32205 Spring Washers
- UNS S31803 Washer Supplier in Mumbai
- Duplex Steel S31803 Hexagonal Washer
- Duplex Steel S32205 Washer
- UNS S32205 Plain Washer
- SAF 2205 Hex Washers
- DSS S31803 Dock Washer
- UNS S32205 Tooth Lock Washer
- Duplex Steel S32205 Customized Washer
- Duplex Steel S31803 Flat Washer
- Duplex 2205 Countersunk Washer
- ASTM A193 Duplex Grade S31803 Square Washer
- Duplex Steel S32205 Dome Washer
- ASTM A193 Duplex Grade S31803 Dome Tooth Washer
- DSS 1.4462 Washers
- SAF 2205 Dome Washer
- Duplex Steel S31803 Tooth Lock Washer
- UNS S32205 Ogee Washer Stockists
- UNS S32205 Star Washers
- 1.4462 Dome Washer
- ASTM A193 Duplex Steel S32205 Flat Washer
- Duplex Stainless Steel S31803 Washers
- ASTM A193 Duplex Steel S31803 Cup Washer
- Duplex Steel S31803 Split Ring Washer
- UNS S32205 Industrial Washers in Mumbai, India
- Duplex Grade S31803 Belleville Washers
- Duplex 2205 Wave Washer Manufacturer
- UNS S31803 Finishing Washers
- Duplex Grade S31803 Countersunk Finishing Washer
- Duplex Steel S31803 Tab Washer
- DIN 1.4462 Star Washers
- Duplex Steel S32205 Spherical Washer
- 1.4462 Hex Split Ring Washer
- DSS S32205 Cup Washer Price List
- ASTM A193 Duplex Grade S32205 Punched Washer
- SAF 2205 Machine Washer
- DSS S31803 Round Washer Supplier
- Duplex Steel S32205 Conical Spring Washer Exporter
- UNS S32205 Spring Washers
- Duplex Stainless Steel S31803 Self Wave Washer
- UNS S31803 K Curved Spring Washer
Duplex Steel S31803 / S32205 Washers Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay
