Xylan Coated 1010 Stud Bolts Manufacturer, Xylan Coated Fasteners, Xylan Coated Washers, Xylan Coated Fasteners, Xylan Coated Bolts, Xylan Coated Fasteners Suppliers in India.
Victor Steel Corporation is a renowned supplier and exporter of XYLAN Coated Fasteners, which is a precipitation-hardenable metal in company of having excessive power at excessive temperatures. The power of these XYLAN Coated Nuts may be in addition boom in company of the aid of using answer treating, observed with the aid of using cold working and getting old. Thanks to the fantastic power at improved temperatures, it locates use in numerous applications, together with plane jet engine components, fasteners and comes in excessive-temperature environments, and business fueloline mills.
Xylan Coated High Temperature Fasteners, Xylan Coated Stud, Xylan Coated 1400 Threaded Rod, Xylan 1424 Bolts, Xylan Coated 1014 Allen Cap Bolt, Xylan Coated 1070 Socket Head Cap Screw, Xylan Coated 1052 Flat Washers, Xylan Coated Anchor Bolts Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For Xylan Coated Fasteners
- Different Forms of Xylan Coated Fasteners
- Standards of Xylan Coated Fasteners
- Dimensions Of Xylan Coated Bolts
- Weight Chart Of Xylan Coated Fasteners
- Xylan Grades and Their Features
- Keep Bulk Stock Of Xylan Coated Fasteners
- Xylan Coated Export to below Mentioned Countries
- Xylan Coated Fasteners Application Area
Surface Technology is an approved Xylan coating applicator with decades of experience in applying a wide range of Xylan coatings. We offer a World-wide, fast turnaround, quality assured service. Xylan coatings are dry-film lubricants combined in a matrix with high-temperature organic polymers developed to provide unique and desirable properties. Meanwhile, the alloy may be welded the use of preferred methods, fueloline tungsten arc, fueloline steel arc, and shielded steel arc. For great results, it’s great to weld the elements within the annealed situation. Otherwise, a cracking would possibly appear. Solution anneal warmness remedy for this XYLAN Coated Washers need to be achieved at 1850 Degree F to 1900 Degree F (1010 Degree C to 1037 Degree C), observed by means of the aid of using getting old at 1450 Degree F (790 Degree C) for 6 hours to 8 hours after which air cooled. Produced below the best specification, this remedy is used for oil field applications. As a result, it unearths use in numerous plane components, mainly for jet engine elements, business fueloline mills and superchargers within the car enterprise.
Standard Specification For Xylan Coated Fasteners
Standard | DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards |
---|---|
Size | M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160 |
Length | 3 mm to 200 mm |
Threads | METRIC, BSW, BSF, UNC, UNF or as required |
Standard | ANSI – American National Standards Institute
|
In Form of | Hex, Square, Round, Threading as per Gauge Etc. |
Head drive | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
Surface finishing | Zinc (yellow, white, blue, black), black oxide, Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET |
Production process | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
Surface Coating |
|
Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Check Xylan Coated Fasteners Hex Bolts From ½” Up To 4” In Diameter, M3 to M56 Xylan Coated Fasteners Fasteners, Xylan Coated Fasteners Bolts Manufacturer India, View Updated Xylan Coated Hex Head, Heavy Hex Bolts & Cap Screws Price List In India.
Different Forms of Xylan Coated Fasteners
Standards of Xylan Coated Fasteners
Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
---|---|---|---|
DIN 931 | BS4882 | DIN 934 | DIN 912 |
DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
BS 1768 | BS 1769 | DIN 7984 | |
UNI 5731 | BS 1083 | ANSI B18.3 | |
UNI 5739 | BS 3692 | ISO 4762 | |
ISO 4014 | ISO 4032 | UNI 5931 | |
ISO 4017 | ISO 4033 | BS 2470 | |
BS 1769 | ANSI B18.2.2 | BS 4168 | |
BS 3692 | |||
ANSI B18.2.1 | |||
Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
DIN 913 | DIN 963 | DIN 938 | DIN 125 |
DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
Xylan Coated Fasteners Other Stock Include
ASTM A193 Gr. B7 | ASTM A193 Gr. B7M | ASTM A193 Gr. L7M | ASTM A193 Gr. B16 | ASTM A193 Gr. L7 |
XYLAN Coated ASTM A193 Gr. B7 Fasteners | XYLAN Coated ASTM A193 Gr. B7M Fasteners | XYLAN Coated ASTM A193 Gr. L7M Fasteners | XYLAN Coated ASTM A193 Gr. B16 Fasteners | XYLAN Coated ASTM A193 Gr. L7 Fasteners |
XYLAN Coated ASTM A193 Gr. B7 Stud Bolts | XYLAN Coated ASTM A193 Gr. B7M Stud Bolts | XYLAN Coated ASTM A193 Gr. L7M Stud Bolts | XYLAN Coated ASTM A193 Gr. B16 Stud Bolts | XYLAN Coated ASTM A193 Gr. L7 Stud Bolts |
XYLAN Coated ASTM A193 Gr. B7 Hex Bolt | XYLAN Coated ASTM A193 Gr. B7M Hex Bolt | XYLAN Coated ASTM A193 Gr. L7M Hex Bolt | XYLAN Coated ASTM A193 Gr. B16 Hex Bolt | XYLAN Coated ASTM A193 Gr. L7 Hex Bolt |
XYLAN Coated ASTM A193 B7 Socket Head Cap Screw | XYLAN Coated ASTM A193 B7M Socket Head Cap Screw | XYLAN Coated ASTM A193 Gr. L7M Socket Head Cap Screw | XYLAN Coated ASTM A193 Gr. B16 Socket Head Cap Screw | XYLAN Coated ASTM A193 Gr. L7 Socket Head Cap Screw |
XYLAN Coated ASTM A193 Gr. B7 Hex Nut | XYLAN Coated ASTM A193 Gr. B7M Hex Nut | XYLAN Coated ASTM A193 Gr. L7M Hex Nut | XYLAN Coated ASTM A193 Gr. B16 Hex Nut | XYLAN Coated ASTM A193 Gr. L7 Hex Nut |
Dimensions Of Xylan Coated Bolts
**All measurements in millimeters** | ||||||||
---|---|---|---|---|---|---|---|---|
NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM A453 | ACROASTM A453 THE FLATS | ACROASTM A453 CORNERS | ||||
D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Weight Chart Of Xylan Coated Fasteners
AS PER IS 1363/67 MM THREADS | ||||||||||
FOR 100 NOS APPROXIMATE WEIGHT IN KGS | ||||||||||
LENGTH | Stainless Steel Fasteners DIAMETER | |||||||||
M 6 | M 5 | M 8 | M 12 | M 10 | M 14 | M 18 | M 22 | M 16 | M 20 | |
16 mm | 0.743 | 0.448 | 1.590 | 3.211 | ||||||
20 mm | 0.812 | 0.598 | 1.711 | 4.892 | 3.411 | |||||
25 mm | 0.897 | 0.660 | 1.871 | 5.252 | 3.660 | 8.170 | ||||
30 mm | 1.010 | 0.737 | 2.070 | 5.574 | 3.912 | 9.690 | 10.707 | 18.657 | ||
35 mm | 1.120 | 0.804 | 2.271 | 5.974 | 4.223 | 10.000 | 16.026 | 11.416 | 19.608 | |
40 mm | 1.230 | 0.881 | 2.470 | 6.410 | 4.533 | 10.288 | 16.667 | 12.107 | 20.747 | |
45 mm | 1.340 | 0.958 | 2.671 | 6.859 | 4.840 | 10.504 | 17.241 | 12.821 | 21.739 | |
50 mm | 1.450 | 1.030 | 2.870 | 7.299 | 5.155 | 11.261 | 17.857 | 28.409 | 13.624 | 22.727 |
55 mm | 1.560 | 3.071 | 7.740 | 5.464 | 11.628 | 18.868 | 30.120 | 14.409 | 23.810 | |
60 mm | 1.670 | 3.270 | 8.183 | 5.774 | 12.255 | 20.000 | 32.051 | 15.244 | 25.126 | |
65 mm | 1.781 | 3.472 | 8.621 | 6.083 | 12.626 | 21.008 | 34.014 | 16.026 | 26.455 | |
70 mm | 1.890 | 3.671 | 9.058 | 6.394 | 12.987 | 22.124 | 35.461 | 16.835 | 27.778 | |
75 mm | 2.000 | 3.873 | 9.506 | 6.702 | 13.228 | 23.256 | 39.063 | 17.606 | 29.070 | |
80 mm | 2.111 | 4.072 | 10.000 | 7.013 | 13.889 | 24.510 | 40.000 | 18.248 | 30.303 | |
90 mm | 4.472 | 10.917 | 7.634 | 14.925 | 26.042 | 41.667 | 19.841 | 33.113 | ||
100 mm | 4.873 | 11.820 | 8.251 | 16.340 | 27.778 | 46.296 | 21.459 | 35.714 | ||
110 mm | 12.723 | 8.881 | 17.730 | 31.250 | 47.170 | 23.041 | 38.168 | |||
120 mm | 13.624 | 9.506 | 18.797 | 32.895 | 50.000 | 24.631 | 40.984 | |||
130 mm | 14.535 | 10.101 | 20.000 | 34.722 | 52.632 | 26.316 | 43.478 | |||
140 mm | 15.432 | 10.707 | 20.833 | 35.461 | 55.556 | 27.933 | 46.296 | |||
150 mm | 16.340 | 11.312 | 22.222 | 37.594 | 58.824 | 29.412 | 48.544 | |||
160 mm | 17.241 | 11.905 | 24.272 | 40.984 | 61.728 | 31.056 | 50.505 | |||
170 mm | 18.116 | 12.500 | 64.935 | 32.680 | 53.191 | |||||
180 mm | 19.011 | 13.123 | 26.882 | 67.568 | 34.247 | 55.556 | ||||
190 mm | 19.920 | 13.736 | 70.423 | 35.971 | 58.140 | |||||
200 mm | 20.833 | 14.327 | 29.586 | 49.020 | 73.529 | 37.594 | 60.976 | |||
220 mm | 22.624 | 15.528 | 79.365 | 40.650 | 65.789 | |||||
240 mm | 24.510 | 16.722 | 84.746 | 43.860 | 71.429 | |||||
250 mm | 25.381 | 17.301 | 87.719 | 45.455 | 74.627 | |||||
260 mm | 26.316 | 17.921 | 90.909 | 47.170 | 76.923 | |||||
280 mm | 28.090 | 19.157 | 98.039 | 50.505 | 81.967 | |||||
300 mm | 29.940 | 20.325 | 104.167 | 53.763 | 87.719 | |||||
320 mm | 31.646 | 56.818 | 92.593 | |||||||
340 mm | 33.557 | 60.241 | 98.039 | |||||||
360 mm | 35.211 | 63.291 | 104.167 | |||||||
380 mm | 37.037 | 66.667 | 108.696 | |||||||
400 mm | 39.063 | 69.444 | 113.636 |
Xylan Grades and Their Features
Product | Comments/Uses | Low Friction | Corrosion Resist. | Abrasion Resist. | Thickness | Cure Temp. °C/#mins (PMT) | Working Temperature | |
---|---|---|---|---|---|---|---|---|
Xylan 1010 | Dry-film lubricant for any wear surface to reduce friction, prevent scoring and galling, and provide secondary lubrication in the event of failure of the primary (conventional) lubricant. In addition to its low coefficient of friction (0.02-0.10), Xylan 1010 has good release properties, good chemical and abrasion resistance, and operates at temperatures up to 500 ̊F/260 ̊C continuous (550 ̊F/285 ̊C intermittent). | 10 | 4 | 3 | 20 ± 5 m | 220-345/ 20-5min | -195°C to +260°C | |
Xylan 1014 | Similar to Xylan 1010, but with significantly more bonding resin relative to its content of polytetrafluoroethylene (PTFE) lubricant. This provides a finish that is harder, more abrasion-resistant, glossier and less porous. Friction values remain low and predictable. | 8 | 5 | 4 | 20 ± 5 m | 220-345/ 20-5min | -195°C to +260°C | |
Xylan 1052 | Dry-film lubricant formulated with PTFE and MoS2 for high-pressure, low-speed wear applications. Its unique chemistry provides dependable, bonded lubrication for bearing surfaces subjected to extreme pressures of up to 10,500 kg/cm2 (150,000 psi). Xylan 1052 operates at temperatures up to 500 ̊F/260 ̊C continuous (550 ̊F/285 ̊C intermittent). | 6 | 4 | 4 | 15 ± 5 m | 220-345/ 20-5min | -195°C to +260°C | |
Xylan 1070 | Highly corrosion-resistant, low-friction coating designed to reduce make-up and break-out torque, even after prolonged exposure to corrosive environments. Xylan 1070 also offers good wear and abrasion resistance. | 8 | 6 | 4 | 20 ± 5 m | 220-345/ 20-5min | -195°C to +260°C | |
Xylan 1212 | Waterborne thin-film barrier coating with excellent corrosion resistance, ideal where tolerance is critical and lubrication unnecessary. | NNS | 8 | 4 | 20 ± 5 m | 175-205/ 60-15min | -20°C to +180°C | |
Xylan 1213 | Waterborne, dry-film lubricant designed for high-pressure/low-speed applications. When combined with Xylan 1212 offers good corrosion and abrasion resistance. | 8 | 6 | 4 | 17.5 ± 2.5 m | 205-275/ 10-5min | -20°C to +180°C | |
Xylan 1270(1400) | A low-cost alternative to Xylan 1070 (1424), but with less lubrication. For fasteners where reduced makeup torque is not necessary. | 5 | 7 | 3 | 20 ± 5 m | 180-260/ 30-5min | -50°C to +200°C | |
Xylan 1311 | Similar to Xylan 1331 with less PTFE. Use when abrasion resistance is more important than lubrication and/or nonwetting properties. Considered an economical single-film coating. | NNS | 9 | 8 | 22.5 ± 2.5 m | 375-400/ 15-5min | -20°C to +230°C | |
Xylan 1331 | Dry-film lubricant with PPS and PTFE for outstanding wear/abrasion resistance. The high percentage of PTFE provides a lubricious, nonstick surface. This resin-bonded coating has excellent corrosion and chemical resistance and is virtually unaffected by any solvents up to 205 ̊C (400 ̊F). | NNS | 9 | 6 | 22.5 ± 2.5 m | 375-400/ 15-5min | -20°C to +230°C | |
Xylan 1424 | Waterborne/VOC-compliant, highly corrosion-resistant, dry-film lubricant designed for use on any mating surface requiring lubrication. Xylan 1424 reduces make-up and break-out torque and also offers excellent chemical and abrasion resistance. Similar to Xylan 1014. | 8 | 8 | 4 | 17.5 ± 2.5 m | 205-275/ 15-5min | -20°C to +180°C | |
Xylan 1425 | Waterborne, dry-film lubricant formulated with PTFE and MoS2 specifically for high-pressure, lowspeed wear applications. Its unique chemistry provides dependable, bonded lubrication for bearing surfaces subjected to extreme pressures up to 10,500 kg/cm2 (150,000 psi). Xylan 1425 operates well in harsh chemical environments and at temperatures up to 190 ̊C (375 ̊F). Similar to Xylan 1052. | 6 | 6 | 4 | 17.5 ± 2.5 m | 205-275/ 15-5min | -20°C to +180°C | |
Xylan 1427 | Waterborne, low-friction, highly corrosion-resistant fastener coating designed to reduce make-up and break-out torque, even after prolonged exposure to corrosive environments. Xylan 1427 also offers excellent chemical, wear and abrasion resistance. | 6 | 8 | 4 | 17.5 ± 2.5 m | 205-275/ 15-5min | -20°C to +180°C | |
Xylan 1514 | UV-resistant, dry-film lubricant with excellent low friction. Xylan 1514 is designed for highly visible, decorative applications where stain resistance and easy-clean properties are required. This coating also offers some corrosion and abrasion resistance and is considered the most lubricious in the series.ns, light fittings, personal-care products, radomes, I-O drives, etc. | 9 | 3 | 4 | 20 ± 5 m | 220-275/ 30-5min | -40°C to +220°C | |
Xylan 1756 over 4289 | Multicoat FEP system, typically used for mould release and industrial bakeware. | 4 | 8 | 3 | 4289 = 15 ± 3 m 1756 = 15 ± 5 m | 375-420/ 10-5min | -195°C to +205°C | |
Xylan 4090 | Optional primer for use under the 1000 series of coatings. Note: clear coating also known as Primer P92 | NNS | 6 | 4 | 20 ± 5 m | 220-345/ 20-5min | -195°C to +285°C | |
Xylan 5110 | A waterborne, low-friction, dip-spin coating for applications where a particularly wide operating temperature range is required – up to 260°C (500°F). Xylan 5110 is free of all restricted heavy metals, and is available in a range of colours (excluding light shades). Typical applications include screws and threaded fasteners. | 6 | 2 | 3 | 6 ± 1 m | 220-315/ 20-5min | -195°C to +265°C | |
Xylan 5164 | A solvent-borne, low-friction, dipspin coating that has particularly good UV resistance. This coating is often used to provide product identification as it is available in a wide range of colours, including white. Xylan 5164 is free of all restricted heavy metals. Typical applications include wood screws and threaded fasteners. | 8 | 3 | 4 | 7 ± 1 m | 220-275/ 30-5mins | -40°C to +220°C | |
Xylan 5230 | A solvent-borne, controlled-friction dip-spin coating that has been designed particularly for the automotive industry. It offers controlled torque tension coupled with extremely good corrosion resistance and can withstand 240 hours salt-spray when applied over a phosphate pretreatment. This coating also has good resistance to all automotive fuels, lubricants and fluids. Xylan 5230 resists chipping and flaking and is easy to apply. | 3 | 7 | 3 | 7 ± 1 m | 180-260/ 30-5min | -50°C to +200°C | |
Xylan 5250 | A solvent-borne dip-spin coating with extremely good corrosion resistance and good UV resistance. It is ideal for use in the roofing and appliance industries where general weathering resistance is required, and is available in a range of colours. Typical applications include roofing fasteners, screws, stampings and end-caps. | NNS | 7 | 3 | 7 ± 1 m | 190-220/ 30-10min | -50°C to +200°C | |
Xylan 5270 | A solvent-borne dip-spin coating with excellent corrosion resistance. Similar to Xylan 5230, but without the low-friction properties. Xylan 5270 is available in a range of colours, including white. | 3 | 7 | 3 | 7 ± 1 m | 180-260/ 30-5min | -50°C to +200°C | |
Xylan 5420 | A waterborne, PTFE-containing dipspin coating with excellent corrosion resistance. This coating can offer low friction and abrasion resitance properties similar to Xylan 5230, but also has improved corrosion resistance, as well as being more environmentally friendly. Xylan 5420 is low in VOCs and is free of all restricted heavy metals. Great for use on small fasteners and hardware. | 3 | 7 | 3 | 7 ± 1 m | 180-260/ 30-5min | -50°C to +200°C | |
Xylan 5430 | A new generation of protective coatings for small fasteners and hardware. Similar to Xylan 5420 (low VOCs), but with improved UV protection. | 3 | 7 | 3 | 7 ± 1 m | 180-260/ 30-5min | -50°C to +200°C | |
Xylan 5611 | A solvent-borne, zinc-rich coating that gives sacrificial anodic protection against corrosion. Xylan 5611 offers excellent corrosion and abrasion resistance. It is available in a silver-grey colour, and can also be used as a primer for other Xylan coatings. Xylan 5611 is widely used in the roofing and appliance industries for the bulk application of items such as threaded fasteners, screws, stampings and end-caps. | NNS | 8 | 6 | 7 ± 1 m | 205-220/ 10-5min | -55°C to +175°C |
Keep Bulk Stock Of Xylan Coated Fasteners
- Xylan Coated 1010 Fasteners
- Xylan Coated 1010 Socket Cap Screw
- Xylan Coated Tie Bars
- Xylan Coated Socket Head Cap Screws
- Xylan Coated High Temperature Stud Bolts
- Xylan Coated Allen Cap Bolt
- Xylan Coated Bolts
- Xylan Coated Lag Bolts
- Xylan Coated Threaded Rod
- Xylan Coated Hex Bolts
- Xylan Coated Carriage Bolts
- Xylan Coated Hex Bolt
- Xylan Coated Supplier in Mumbai
- Xylan Coated Washers
- Xylan Coated 1014 Stud
- Xylan 1052 Double Ended Studs Stockists
- Xylan Coated Heavy Hex Bolts
- Xylan 5164 Spring Washers
- Xylan Coated Machine Bolts
- Xylan Coated Studs
- Xylan Coated 1425 Industrial Full Threaded Stud Bolts Supplier
- Xylan 1514 Studs
- Xylan Coated Single End Stud Bolts Price List
- Xylan Coated Foundation Bolts
- Xylan 4090 Screw
- Xylan Coated U Bolts
- Xylan Coated Flat Washers
- Xylan Coated 1331 Industrial Fastener
- Xylan Coated Spring Washers
- Xylan Coated Square Head Bolts Supplier
- Xylan Coated Ogee Washers
- Xylan 5230 Countersunk Washer
- Xylan Coated Socket Head Cap Screw
- Xylan 1424 Self Tapping Screws
Xylan Coated Fasteners Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay