Like us !
Stay Connected !
Follow us
Chat With us
Mail us

UNS 1.4762 PIPE FLANGES, 446 STAINLESS STEEL FLANGES, GRADE 446 STAINLESS STEEL FLANGES, ASTM A182 446 BLIND FLANGES MANUFACTURER, SS 446 Slip On Flange Suppliers in India.

Victor Steel Corporation is a widely held distributor of SS 446 Flanges, which provide sturdy metallurgical variability and adaptability. Castings make Stainless Steel UNS S44600 Orifice Flanges viable so one can pick out amongst diverse chemical compositions and organizational manipulate that healthy your project’s requirements. It has this capacity to alternate and shape the metallic into your preferred form at the same time as breaking apart the solid shape and generating finer grains. The flanges are available at different dimensions, size, shape, length, surface finish, and wall thickness. Clients are provided the same with cut- made specifications as per their drawings and demand.We are ASTM A182 SS 446 Flange Manufacturer in India in various shapes, size, grades & specifiaction with ANSI/ASME and DIN standards.

ASTM A182 446 SORF FLANGES, 446 GROOVE & TONGUE FLANGE, SS 446 RING TYPE JOINT FLANGES, ASTM A182 446 SPECTACLE BLIND FLANGES, ASME SA182 446 RTJ FLANGES, DIN 3 THREADED FLANGES, 446 STAINLESS STEEL ORIFICE FLANGE, 446 WNRF FLANGE DEALER, ASTM A182 446 WELDO FLANGES Manufacturer in Mumbai, India.

Apart from this, Stainless Steel WNR 1.4762 Blind Flanges improves mechanical properties as it consolidates low-density areas, fueloline porosity, and micro-shrinkage at the same time as improving the density and aligning the grain go with the drift. Stainless Steel 446 Weld Neck Flanges a cost – effective replacement for high strength carbon steels as well as other stainless grades. At the solution treating temperature, 1900 Degree F, these Stainless Steel UNS S44600 Blind Flanges is austenitic but undergoes transformation to a low – carbon martensitic structure during cooling to room temperature.

446 Stainless Steel Spectacle Blind Flanges are found in each production enterprise due to the fact they're regarded as popular additives in chemical processing, tools and bearing applications, and greater. It may be produced by means of having a big selection of properties. These elements are used for nearly the entirety within the automobile industry – clutches, gears, bearings, couplings, and a lot more. These flanges are accessible in various grades, particular, and thickness. A wide range of sizes is offered concerning the national and international standards.

Stainless Steel 304 Flanges

Standard Specification For Stainless Steel 446 Flanges

Specifications ASTM A182 / ASME SA182
Flanges size 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Flanges Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange, GOST Flange.
Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Manufacturing Standards ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, BS Flange, EN Flange, API 6A Flange etc
B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British standard (BS)
Any other specilised Flange
DIN: DIN 2527, DIN 2566, DIN 2573, UNS S45367 Flange, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Flanges uses & application Nuclear power (mostly seamless).
Petrochemicals and acids.
Bitumen upgraders.
Heavy oil refineries.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175.

Check ASTM A182 WP446 Ring Type Joint Flanges, 2" 3/4" sch 40 Schedule 80 SS 446 Slip On Flange, SS 446 Flanges Manufacturer India, View Updated Stainless Steel 446 Socket Weld Flanges Price List In India.

Different Forms of 446 Stainless Steel Flanges

Equivalent Grade Chart Of SS 446 Flanges

STANDARD WERKSTOFF NR. UNS JIS
SS 446 1.4762 / 3 S44600 SUS 446

International Standards of ASTM A182 WP446 Slip-On Flanges

ASME/ANSI B16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.28 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

Standard Organizations

Chemical Composition Of Stainless Steel 446 Slip On Flanges

Grade C Mn Si P S Cr Mo Ni Ti
SS 446 0.2 max 1.5 max 0.75 max 0.040 0.030 max 23.00 – 30.00 - 0.50 max

Mechanical Properties Of 446 Flanges

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.5 g/cm3 1510 °C (2750 °F) Psi – 75,000 , MPa – 485 Psi – 40,000 , MPa – 275 20 %

Thickness Chart of Stainless Steel 446 Flanges

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
90° Elbow 45° Elbow Equal tee 90° Elbow 45° Elbow Equal tee 90° Elbow 45° Elbow Equal tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0.04 0.17 0.11 0.05 0.20
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 0.49 0.26 0.17 0.59 0.40 0.23 0.68
40 0.30 0.17 0.68 0.40 0.23 0.86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.4 1.28 0.91 0.59 1.59
65 0.85 0.48 1.41 1.40 0.77 2.19 1.81 0.99 3.13
80 1.25 0.63 1.77 2.20 1.08 3.31 2.97 1.50 4.45
90 1.70 0.75 2.67 2.83 1.42 4.08 4.00 2.00 5.44
100 2.10 1.08 3.46 4.47 2.09 5.27 6.18 2.81 7.71
150 5.45 2.72 8.07 10.89 5.44 10.99 16.32 8.16 13.61
200 10.20 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 19.27 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62.14 79.38 39.69 83.91
Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee
40x.25 0.19 0.19 0.60 0.26 0.26 0.76 0.34 0.34 0.90
50x25 0.28 0.28 0.73 0.40 0.40 1.10 0.54 0.54 1.37
50x40 0.31 0.31 0.76 0.45 0.45 1.15 0.59 0.59 1.43
80x.50 0.55 0.55 1.56 1.00 1.00 2.91 1.79 1.79 3.91
100x50 0.78 0.78 2.94 1.50 1.50 4.48 1.95 1.95 6.55
100x80 0.87 0.87 3.04 1.74 1.74 4.64 2.33 2.33 6.79
150x80 1.82 1.82 6.86 3.95 3.95 9.68 5.51 5.51 11.57
150x100 1.96 1.96 7.10 4.07 4.07 11.94 5.96 5.96 11.97
200x100 3.01 3.01 13.46 6.55 6.55 17.98 9.23 9.23 24.18
200x150 3.19 3.19 14.08 6.74 6.74 18.82 10.12 10.12 25.31

Tolerance Chart of Stainless Steel 446 Flanges

Nominal Diameter O.D.For Bevel End I.D.For End Wall Thickness Elbow Tee Reducer Cap 180°Elbow
DN NPS A B C M H E O K Roughness
15-65 1/2-2 1/2 +1.6/-0.8 0.8 -12.50% 1.6 1.6 1.6 1.6 1.6 3.2 6.4 6.4 0.8
80-100 3-4 1.6 1.6 6.4
125-200 5-8 +2.4/-1.6
250-450 10-18 +4/-3.2 3.2 2.4 2.4 2.4 2.4 2.4 9.6
500-600 20-24 +6.4/-4.8 4.8 3.2 3.2 3.2 3.2 4.8 9.6
650-750 26-30
4.8 4.8 4.8 4.8
800-1200 32-48
1250-1500 50-60 +9.6/-6.4 6.4 9.6 9.6 9.6 9.6 9.6
1550-1750 62-70 +12.7/-9.6 9.6 12.7 12.7
1800-2000 72-80 +16/-12 12 16 16

Keep Bulk Stock Of Stainless Steel 446 Flanges

  • Stainless Steel UNS S44600 Flanges Supplier in Mumbai
  • ASTM A182 446 Cover Flanges
  • Stainless Steel 446 Slip on Flanges
  • ASME B16.5 446 Stainless Steel Socket weld Flanges
  • SS 446 Long Weld Neck Flanges
  • ASTM A182 446 Lap Joint Flanges
  • Steel 446 Threaded Flanges
  • Stainless Steel 446 BS 4504 Flanges Supplier
  • ASTM A182 Stainless Steel 446 Threaded Flanges
  • Stainless Steel 446 Forged Flanges
  • Stainless Steel 446 EN X5CrNi18-10 Flanges
  • SS 446 Weld Neck Flanges
  • ASTM A182 446 Square Flanges
  • SS 446 Flat Flange
  • ASTM A182 Stainless Steel 446 Threaded Flanges
  • ASTM A182 Stainless Steel 446 Flanges
  • A182 446 Stainless Steel Orifice Flanges
  • ANSI 446 Stainless Steel Blind Flange
  • SS 446 Socket weld Flanges Stockists
  • ASTM A182 446 Lap Joint Flanges
  • SS 446 ASME B16.5 Flanges Manufacturer in Mumbai, India
  • Stainless Steel 446 DIN Flanges
  • Stainless Steel 446 WNRF Flange
  • Stainless Steel 446 Raised Face Flanges
  • SS 446 Ring Type Joint Flanges
  • Steel 446 Tongue & Groove Flanges
  • ASTM A182 SS 446 Lap Joint Flanges
  • ASME SA182 SS 446 SWRF Flange
  • ASTM A182 446 Threaded Reducing Flanges
  • ASME SA182 SS 446 BLRF Flange Supplier
  • Stainless Steel DIN 1.4762 Orifice Flange
  • SS 446 Male & Female Flanges
  • Stainless Steel 446 Reducing Flanges Price List
  • Stainless 446 SORF Flanges
  • Stainless Steel SUS 446 Reducing Flanges
  • Stainless Steel BS 446 Spectacle Blind Flanges
  • SS 446 Screwed Flanges
  • A182 SS 446 Square Flanges
  • ASTM A182 446 Stub End Flanges Exporter
  • 446 SS Nippo Flange Manufacturer
  • Stainless Steel 446 Raised Face Weld Neck Flanges

SS 446 Flanges Export to below Mentioned Countries


MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus

AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon

NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark

EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta

ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia

SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay

Industry
Call Us And get it done!

We Have 25+ Years Industrial Experience

Have a question? call us now

+91 98672 64038

Drop us an Email

sales@victorfittings.com

We are open on

Mon - Sat 09:00 - 07:00Sunday - Closed