DIN 2.4068 Tap End Stud Bolts, Nickel 200 Studs Manufacturer, UNS N02201 Stud Bolts, Alloy 201 Double End Stud Bolts, Nickel Alloy 200 Stud Bolts Suppliers in India.
Victor Steel Corporation is an approved exporter of Nickel Alloy 200 / 201 Stud Bolts, which is obtainable for our clients in different sizes and shapes. Rockwell Hardness is a standard approach for measuring or checking out the hardness of Nickel Alloy UNS N02200 Stud Bolts. This residual penetration is mechanically registered on a dial while the most important load is eliminated from the penetrator. Rolling Mills is gadget used for rolling down steel to a smaller length or to a given form using units of rolls tie contours of which decide or style the product into several intermediate and very last shapes.
201 Nickel Alloy Stud Bolt, Nickel Alloy 200 End Stud Bolts, Ni 200 Stud, Alloy 201 Threaded Rod, Nickel 200 Tie Rods, Nickel 201 Half Thread Stud Bolts, UNS N02200 Single End Stud Bolt, Nickel Alloy 201 Stud Bolts, Alloy 200 Full Threaded Stud Bolt, 2.4066 Stud Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For Nickel Alloy 200 / 201 Stud Bolts
- Different Forms of Nickel Alloy 200 / 201 Stud Bolts
- Equivalent Grade Chart Of Nickel Alloy 200 / 201 Stud Bolts
- Chemical Composition Of Nickel Alloy 200 / 201 Stud Bolts
- Mechanical Properties Of Nickel Alloy 200 / 201 Stud Bolts
- Size Chart Of Alloy 200 / 201 Stud Bolt
- Weight Chart Of Nickel Alloy 200 / 201 Stud Bolt
- Keep Bulk Stock Of Nickel Alloy 200 / 201 Stud Bolts
- Nickel Alloy 200 / 201 Stud Bolts Export to below Mentioned Countries
- Nickel Alloy 200 / 201 Stud Bolts Application Area
Shear is a kind of slicing operation wherein the Nickel Alloy WNR 2.4066 Stud Bolts is reduce with the aid of a shifting blade and stuck aspect or with the aid of using a couple of shifting blades that can be both flat or curved. The high chromium and nickel content give the Nickel 200 Stud Bolts excellent oxidation resistance as well as high strength at high temperature. The high chromium and nickel contents in Nickel 201 Stud Bolts provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys.
Nickel 201 Stud Bolts has combination of strength and ductility to withstand severe forming methods with excellent corrosion resistance. Seam Welding of this alloy is an electric-resistance kind of welding manner, wherein the lapped sheet is surpassed among electrodes of the curler kind at the same time as a chain of overlapping spot welds is made with the aid of using the intermittent software of electrical current.
Standard Specification For Nickel Alloy 200 / 201 Stud Bolts
Specification | ASTM F468, B160 / ASME SF468, SB160 |
---|---|
Size | M02 to M33, Custom Sizes |
Length | 3 mm to 200 mm |
Stud Bolt | UNF, BSW, BSF, METRIC, UNC, or as required |
Standard | DIN 525, DIN 835, DIN 938, DIN 939, DIN 940, DIN 949-1, DIN 949-2, DIN 975, DIN 976, DIN 2509, BS 2693, BS 3692, BS 4439, IS 1862, IS 13178, ANSI/ASME B18.31.2, ANSI/ASME B16.5 |
Form | Hex, Threading, Square, Round as per Gauge Etc. |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Types | Reduced Shank, Stud Bolts with Reduced Shank, Tap End Stud Bolts, Fully Threaded Stud Bolts, Weld Studs, Double End Stud Bolts, Stud Bolts, Flange Stud Bolts |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
Head drive | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
Surface Coating | Ptfe Coated Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Check Nickel Alloy 201 Stud Bolts From 3/4 Dia X 140 MM Diameter, M3 to M56 Alloy 200 Threaded Rod, Nickel 201 Stud Manufacturer India, View Updated Ni 200 Double Ended Stud Bolt & Single End Stud Bolt Price List In India.
Different Forms of Nickel Alloy 200 / 201 Stud Bolts
Equivalent Grade Chart Of Nickel Alloy 200 / 201 Stud Bolts
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | - | LC-Ni 99 |
Chemical Composition Of Nickel Alloy 200 / 201 Stud Bolts
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties Of Nickel Alloy 200 / 201 Stud Bolts
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Nickel 200 / 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Size Chart Of Alloy 200 / 201 Stud Bolt
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
Weight Chart Of Nickel Alloy 200 / 201 Stud Bolt
Weight Imperial | |||||||||||||
STUD BOLT LENGTH (in inches) | 1/2 | 5/8 | 3/4 | 7/8 | 1 | 1 1/8 | 1 1/4 | 1.3/8 | 1 1/2 | 1.5/8 | 1.3/4 | 1 7/8 | |
2.1/2 | 10.8 | ||||||||||||
2.3/4 | 11.6 | 19.8 | |||||||||||
3.1/4 | 12.4 | 21 | 32.4 | ||||||||||
3.1/2 | 13.2 | 22.2 | 34.3 | 50 | |||||||||
4 | 14 | 23.4 | 36.2 | 52.6 | 71.8 | ||||||||
4.1/2 | 14.8 | 24.6 | 38.1 | 55.2 | 75.2 | 102 | |||||||
4.3/4 | 15.6 | 25.8 | 40 | 57.8 | 78.6 | 106 | 137 | ||||||
5 | 16.4 | 27 | 41.9 | 60.4 | 82 | 111 | 142 | 179 | |||||
5.1/2 | 17.2 | 28.2 | 43.8 | 63 | 85.4 | 115 | 147 | 186 | 234 | ||||
6 | 18 | 29.4 | 45.7 | 65.6 | 88.8 | 119 | 153 | 193 | 242 | 289 | |||
6.1/4 | 18.8 | 30.6 | 47.6 | 68.2 | 92.2 | 123 | 158 | 200 | 250 | 298 | 263 | ||
6.1/2 | 19.6 | 32.3 | 49.5 | 70.8 | 95.6 | 128 | 164 | 206 | 258 | 308 | 374 | 437 | |
7 | 20.4 | 33.5 | 50.8 | 73.4 | 99 | 132 | 169 | 213 | 266 | 317 | 385 | 449 | |
7.1/2 | 21.2 | 34.8 | 52.7 | 75.5 | 103 | 136 | 174 | 220 | 275 | 326 | 396 | 462 | |
8 | 22 | 36.1 | 54.5 | 78 | 106 | 141 | 180 | 226 | 283 | 336 | 407 | 475 | |
8.1/4 | 37.3 | 56.3 | 80.5 | 108 | 145 | 185 | 233 | 291 | 345 | 418 | 488 | ||
8.3/4 | 38.6 | 58.1 | 83.1 | 112 | 149 | 191 | 240 | 299 | 354 | 429 | 500 | ||
9 | 39.8 | 60 | 85.6 | 115 | 153 | 196 | 246 | 307 | 364 | 440 | 513 | ||
9.1/2 | 41.1 | 61.8 | 88.2 | 118 | 158 | 201 | 253 | 316 | 373 | 451 | 526 | ||
10 | 63.7 | 90.7 | 122 | 162 | 206 | 260 | 324 | 382 | 463 | 538 | |||
10/1.4 | 93.3 | 125 | 166 | 212 | 267 | 332 | 391 | 474 | 551 | ||||
1.0.1/2 | 128 | 171 | 217 | 273 | 340 | 401 | 485 | 564 | |||||
11 | 132 | 175 | 223 | 279 | 345 | 410 | 496 | 576 | |||||
11.1/2 | 135 | 179 | 228 | 285 | 350 | 419 | 507 | 589 | |||||
12 | 138 | 184 | 233 | 292 | 358 | 429 | 518 | 602 | |||||
Weight Of Metric Studs Bolt | |||||||||||||
STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 |
60 | 5,6 | 8,1 | 12 | 15,6 | |||||||||
70 | 6,1 | 8,9 | 13 | 16,9 | 23,7 | ||||||||
80 | 6,6 | 9,6 | 14 | 18,2 | 25,4 | 32,5 | |||||||
90 | 7,1 | 10,3 | 15 | 19,6 | 27,1 | 34,5 | 45,5 | ||||||
100 | 7,6 | 11 | 16 | 21 | 28,8 | 36,7 | 47,2 | 54,2 | |||||
110 | 8,1 | 11,7 | 17 | 22,2 | 30,4 | 38,7 | 48,3 | 58,2 | 80 | ||||
120 | 8,6 | 12,4 | 18 | 23,6 | 32,1 | 40,7 | 50,9 | 60,2 | 84,7 | 107 | |||
130 | 9,1 | 13,2 | 19 | 24,9 | 33,7 | 42,8 | 53,4 | 63,2 | 88,6 | 111 | 141 | ||
140 | 9,6 | 14,2 | 20 | 26,2 | 35,4 | 44,9 | 55,9 | 66,2 | 92,4 | 116 | 147 | 185 | |
150 | 10,1 | 14,9 | 20,8 | 27,5 | 36,9 | 46,9 | 58,5 | 69,2 | 96,3 | 121 | 153 | 192 | 237 |
160 | 10,6 | 15,6 | 21,8 | 29,1 | 38,6 | 49 | 61 | 72,2 | 100,1 | 126 | 159 | 199 | 245 |
170 | 16,4 | 22,8 | 30,4 | 40,2 | 51,1 | 63,5 | 75,2 | 104 | 130 | 165 | 206 | 253 | |
180 | 23,8 | 31,8 | 41,9 | 52,3 | 66,1 | 78,1 | 108 | 135 | 171 | 213 | 261 | ||
190 | 33,1 | 43,5 | 54,4 | 68,4 | 81,1 | 112 | 140 | 176 | 219 | 269 | |||
200 | 34,5 | 45,2 | 56,2 | 71 | 84 | 116 | 144 | 182 | 226 | 278 | |||
210 | 35,8 | 46,8 | 58,5 | 73,5 | 88,4 | 120 | 149 | 188 | 233 | 286 | |||
220 | 37,1 | 48,4 | 60,6 | 76,1 | 91,4 | 124 | 154 | 194 | 240 | 294 | |||
230 | 38,5 | 50,1 | 62,6 | 78,6 | 94,4 | 127 | 159 | 201 | 247 | 302 | |||
240 | 39,8 | 51,7 | 64,7 | 81,2 | 97,4 | 130,9 | 164 | 208 | 253 | 310 | |||
250 | 41,1 | 53,4 | 66,8 | 83,7 | 100,4 | 134,8 | 172 | 214 | 260 | 319 | |||
260 | 55 | 68,8 | 86,3 | 103,4 | 138,6 | 177 | 220 | 267 | 327 | ||||
270 | 56,6 | 70,9 | 88,8 | 106,4 | 142,5 | 182 | 224 | 274 | 335 | ||||
280 | 58,3 | 73 | 91,4 | 109,4 | 146,3 | 187 | 230 | 281 | 343 | ||||
290 | 75 | 93,9 | 112,4 | 150,1 | 192 | 236 | 291 | 360 | |||||
300 | 77,1 | 96,5 | 115,4 | 154 | 196 | 241 | 298 | 368 | |||||
320 | 101,6 | 121,3 | 161,7 | 206 | 253 | 312 | 380 | ||||||
340 | 127,3 | 169,4 | 215 | 265 | 326 | 395 | |||||||
360 | 133,3 | 177,1 | 224 | 276 | 340 | 411 | |||||||
380 | 184,8 | 234 | 288 | 353 | 428 | ||||||||
400 | 192,5 | 243 | 299 | 367 | 444 | ||||||||
420 | 252 | 311 | 381 | 460 | |||||||||
440 | 262 | 322 | 394 | 477 | |||||||||
460 | 271 | 334 | 408 | 493 | |||||||||
480 | 281 | 345 | 422 | 509 | |||||||||
500 | 290 | 357 | 436 | 526 |
Keep Bulk Stock Of Nickel Alloy 200 / 201 Stud Bolt
- Alloy 200 Double End Stud Bolts
- 2.4068 Stud Supplier
- Nickel 201 Single End Stud Bolt
- ASTM B160 Nickel Alloy 200 Threaded Rod
- Nickel Alloy 200 Studs
- Nickel Weld Studs
- Nickel Alloy 201 Threaded Stud Bolts
- UNS N02200 Heavy Stud Bolt Stockists
- ASTM B160 Nickel Alloy 201 Studs
- UNS N02201 Double Ended Stud
- 201 Nickel Alloy Metric Thread Stud Bolt
- Nickel 201 Full Threaded Stud Bolt
- 200 Nickel Alloy Stud Bolts
- Nickel Alloy 200 Half Thread Stud Bolt
- UNS N02201 Stud Bolt Supplier in Mumbai
- Nickel Alloy 200 Continuous Thread Stud Bolt
- Alloy 201 Flush Head Studs
- Ni 200 Continuous Thread Stud Bolt
- Alloy 201 Tap End Stud Bolts
- Nickel Alloy 200 Threaded Rod
- Alloy 200 Tie Rods
- Nickel 200 M16 Stud Bolt Exporter
- ASTM B160 Nickel Alloy 201 Wheel Lug Stud Bolt
- Ni 200 Studs
- Nickel Alloy 200 Stud Bolts Supplier
- Alloy 200 Stud Bolt in Mumbai, India
- Alloy 200 Tie Bars
- DIN 2.4066 High Pressure Stud Bolt
- 2.4066 Industrial Bolts
- ASTM B160 Nickel 201 Partial Threaded Stud Bolt List
- 2.4068 Stud Bolt
- UNS N02200 Continuous Thread Stud Bolt
- Nickel Alloy 200 Drywall Stud
- 201 Nickel Industrial Stud Bolts
- 200 Nickel Stud Bolt Manufacturer
- Nickel 201 Stud Bolts With Reduced Shank
- Alloy 200 Studs Bolts
- Nickel Alloy 201 Threaded Studs
Nickel Alloy 200 / 201 Stud Bolts Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay