Hot Dip Galvanized Washers, Hot Dip Galvanized Stud Bolts, Hot Dip Galvanized F1554 Fasteners, Hot Dip Galvanized Fasteners, Hot Dip Galvanized Bolts Manufacturer Suppliers in India.
Victor Steel Corporation is a renowned supplier and stockist of Hot Dip Galvanized Fasteners, which may be welded the use of preferred methods, fueloline tungsten arc, fueloline steel arc, and shielded steel arc. The fundamental makes use of this alloy encompass jet engine additives, commercial fueloline turbine elements, superchargers in internal-combustion engines, non-magnetic cryogenic elements, excessive-temperature afterburner elements, tanks, piping, pumps, etc. That said, the elements must be welded within the solution annealed situation. Welding elements in elderly situation can bring about cracking.
F1554 Hot Dip Galvanized Manufacturer, Hot Dip Galvanized Allen Cap Bolt, Hot Dip Galvanized Anchor Bolts, Hot Dip Galvanized Flat Washers, Hot Dip Galvanized Stud, Hot Dip Galvanized High Temperature Fasteners, Hot Dip Galvanized Threaded Rod, Hot Dip Galvanized Socket Head Cap Screw in Mumbai, India.
Table of Contents
- Standard Specification For Hot Dip Galvanized Fasteners
- Different Forms of Hot Dip Galvanized Fasteners
- Hot Dip Galvanized Fasteners Standard
- Dimensions Of Hot Dip Galvanized Bolts
- Weight Chart Of Hot Dip Galvanized Fasteners
- Hot Dip Galvanized Fasteners Torque Chart
- Keep Bulk Stock Of Hot Dip Galvanized Fasteners
- Hot Dip Galvanized Export to below Mentioned Countries
- Hot Dip Galvanized Fasteners Application Area
Maximum strength may be acquired the use of solution treating, observed in company of the aid of using cold working and aging. Meanwhile, Hot Dip Galvanized Bolts may be conveniently formed and cold-laboured, in addition to different austenitic steels. These encompass excessive strength at improved temperatures, wonderful corrosion resistance as much as 1300 Degree F (700 Degree C), top fabrication properties, and low-temperature non-magnetic strength. Hot Dip Galvanized Washers is an alloy that contains many favourable properties. Thanks to the beneficial properties, it unearths use in jet engines, superchargers, and commercial fueloline turbines, mainly for rotors, shafts, and blades. Furthermore, this specification is used for excessive-temperature afterburner elements, tanks, piping, pumps, and warmth exchangers. Meanwhile, the alloy may be welded the use of fueloline tungsten arc, fueloline steel arc, and shielded steel arc methods. That said, unique care must be applied, due to the fact cracking might also additionally arise on elements within the elderly situation.
Standard Specification For Hot Dip Galvanized Fasteners
| Specification | ASTM/ASME B18.2.1, B18.3 |
|---|---|
| Standard | DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards |
| Size | M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160 |
| Length | 3 mm to 200 mm |
| Threads | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard | ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
| In Form of | Hex, Square, Round, Threading as per Gauge Etc. |
| Head drive | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
| Surface finishing | Zinc (yellow, white, blue, black), black oxide, Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET |
| Production process | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
| Surface Coating |
All surface finishes offered including Geomet & PTFE, Galvanised, Zinc, Electroless Nickel, Sherardized, Dacromet |
| Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Check Hot Dip Galvanized Hex Bolts From ½” Up To 4” In Diameter, M3 to M56 Hot Dip Galvanized Fasteners, Hot Dip Galvanized Bolts Manufacturer India, View Updated Hot Dip Galvanized Hex Head, Heavy Hex Bolts & Cap Screws Price List In India.
Different Forms of Hot Dip Galvanized Fasteners
Hot Dip Galvanized Fasteners Standard
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
ANSI And/Or ASME Standards Hot Dip Galvanized Fasteners Inch Series
| ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
|---|---|---|---|
| ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
| ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
| ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
| ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
| ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
| ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
| ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
| ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
| ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
| ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
Dimensions Of Hot Dip Galvanized Bolts
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM A193 | ACROASTM A193 THE FLATS | ACROASTM A193 CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Weight Chart Of Hot Dip Galvanized Fasteners
| AS PER IS 1363/67 MM THREADS | ||||||||||
| FOR 100 NOS APPROXIMATE WEIGHT IN KGS | ||||||||||
| LENGTH | Fasteners DIAMETER | |||||||||
| M 6 | M 5 | M 8 | M 12 | M 10 | M 14 | M 18 | M 22 | M 16 | M 20 | |
| 16 mm | 0.743 | 0.448 | 1.590 | 3.211 | ||||||
| 20 mm | 0.812 | 0.598 | 1.711 | 4.892 | 3.411 | |||||
| 25 mm | 0.897 | 0.660 | 1.871 | 5.252 | 3.660 | 8.170 | ||||
| 30 mm | 1.010 | 0.737 | 2.070 | 5.574 | 3.912 | 9.690 | 10.707 | 18.657 | ||
| 35 mm | 1.120 | 0.804 | 2.271 | 5.974 | 4.223 | 10.000 | 16.026 | 11.416 | 19.608 | |
| 40 mm | 1.230 | 0.881 | 2.470 | 6.410 | 4.533 | 10.288 | 16.667 | 12.107 | 20.747 | |
| 45 mm | 1.340 | 0.958 | 2.671 | 6.859 | 4.840 | 10.504 | 17.241 | 12.821 | 21.739 | |
| 50 mm | 1.450 | 1.030 | 2.870 | 7.299 | 5.155 | 11.261 | 17.857 | 28.409 | 13.624 | 22.727 |
| 55 mm | 1.560 | 3.071 | 7.740 | 5.464 | 11.628 | 18.868 | 30.120 | 14.409 | 23.810 | |
| 60 mm | 1.670 | 3.270 | 8.183 | 5.774 | 12.255 | 20.000 | 32.051 | 15.244 | 25.126 | |
| 65 mm | 1.781 | 3.472 | 8.621 | 6.083 | 12.626 | 21.008 | 34.014 | 16.026 | 26.455 | |
| 70 mm | 1.890 | 3.671 | 9.058 | 6.394 | 12.987 | 22.124 | 35.461 | 16.835 | 27.778 | |
| 75 mm | 2.000 | 3.873 | 9.506 | 6.702 | 13.228 | 23.256 | 39.063 | 17.606 | 29.070 | |
| 80 mm | 2.111 | 4.072 | 10.000 | 7.013 | 13.889 | 24.510 | 40.000 | 18.248 | 30.303 | |
| 90 mm | 4.472 | 10.917 | 7.634 | 14.925 | 26.042 | 41.667 | 19.841 | 33.113 | ||
| 100 mm | 4.873 | 11.820 | 8.251 | 16.340 | 27.778 | 46.296 | 21.459 | 35.714 | ||
| 110 mm | 12.723 | 8.881 | 17.730 | 31.250 | 47.170 | 23.041 | 38.168 | |||
| 120 mm | 13.624 | 9.506 | 18.797 | 32.895 | 50.000 | 24.631 | 40.984 | |||
| 130 mm | 14.535 | 10.101 | 20.000 | 34.722 | 52.632 | 26.316 | 43.478 | |||
| 140 mm | 15.432 | 10.707 | 20.833 | 35.461 | 55.556 | 27.933 | 46.296 | |||
| 150 mm | 16.340 | 11.312 | 22.222 | 37.594 | 58.824 | 29.412 | 48.544 | |||
| 160 mm | 17.241 | 11.905 | 24.272 | 40.984 | 61.728 | 31.056 | 50.505 | |||
| 170 mm | 18.116 | 12.500 | 64.935 | 32.680 | 53.191 | |||||
| 180 mm | 19.011 | 13.123 | 26.882 | 67.568 | 34.247 | 55.556 | ||||
| 190 mm | 19.920 | 13.736 | 70.423 | 35.971 | 58.140 | |||||
| 200 mm | 20.833 | 14.327 | 29.586 | 49.020 | 73.529 | 37.594 | 60.976 | |||
| 220 mm | 22.624 | 15.528 | 79.365 | 40.650 | 65.789 | |||||
| 240 mm | 24.510 | 16.722 | 84.746 | 43.860 | 71.429 | |||||
| 250 mm | 25.381 | 17.301 | 87.719 | 45.455 | 74.627 | |||||
| 260 mm | 26.316 | 17.921 | 90.909 | 47.170 | 76.923 | |||||
| 280 mm | 28.090 | 19.157 | 98.039 | 50.505 | 81.967 | |||||
| 300 mm | 29.940 | 20.325 | 104.167 | 53.763 | 87.719 | |||||
| 320 mm | 31.646 | 56.818 | 92.593 | |||||||
| 340 mm | 33.557 | 60.241 | 98.039 | |||||||
| 360 mm | 35.211 | 63.291 | 104.167 | |||||||
| 380 mm | 37.037 | 66.667 | 108.696 | |||||||
| 400 mm | 39.063 | 69.444 | 113.636 | |||||||
Hot Dip Galvanized Fasteners Torque Chart
| Torque Specifications | |||||||
|---|---|---|---|---|---|---|---|
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | |||||
Nitronic | Nitronic | ||||||
| #2 | 56 | 2.5 | 2.6 | ||||
| 64 | 3.0 | 3.2 | |||||
| #3 | 48 | 3.9 | 4.0 | ||||
| 56 | 4.4 | 4.6 | |||||
| #4 | 40 | 5.2 | 5.5 | ||||
| 48 | 6.6 | 6.9 | |||||
| #5 | 40 | 7.7 | 8.1 | ||||
| 44 | 9.4 | 9.8 | |||||
| #6 | 32 | 9.6 | 10.1 | ||||
| 40 | 12.1 | 12.7 | |||||
| #8 | 32 | 19.8 | 20.7 | ||||
| 36 | 22.0 | 23.0 | |||||
| #10 | 24 | 22.8 | 23.8 | ||||
| 32 | 31.7 | 33.1 | |||||
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | |||||
| Nitronic | Nitronic | ||||||
| 1/4 | 20 | 75.2 | 78.8 | ||||
| 28 | 94.0 | 99.0 | |||||
| 5/16 | 18 | 132 | 138 | ||||
| 24 | 142 | 147 | |||||
| 3/8 | 16 | 236 | 247 | ||||
| 24 | 259 | 271 | |||||
| 7/16 | 14 | 376 | 393 | ||||
| 20 | 400 | 418 | |||||
| 1/2 | 13 | 517 | 542 | ||||
| 20 | 541 | 565 | |||||
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | |||||
| Nitronic | Nitronic | ||||||
| 9/16 | 12 | 682 | 713 | ||||
| 18 | 752 | 787 | |||||
| 5/8 | 11 | 1110 | 1160 | ||||
| 18 | 1244 | 1301 | |||||
| 3/4 | 10 | 1530 | 1582 | ||||
| 16 | 1490 | 1558 | |||||
| 7/8 | 9 | 2328 | 2430 | ||||
| 14 | 2318 | 2420 | |||||
| 1 | 8 | 3440 | 3595 | ||||
| 14 | 3110 | 3250 | |||||
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Foot-Pounds | |||||
| Nitronic | Nitronic | ||||||
| 1 1/8 | 7 | 413 | 432 | ||||
| 12 | 390 | 408 | |||||
| 1 1/4 | 7 | 523 | 546 | ||||
| 12 | 480 | 504 | |||||
| 1 1/2 | 6 | 888 | 930 | ||||
| 12 | 703 | 732 | |||||
Keep Bulk Stock Of Hot Dip Galvanized Fasteners
- ASME B18.2.1 Hot Dip Galvanized Carriage Bolts
- Hot Dip Galvanized Socket Head Cap Screws
- Hot Dip Galvanized Socket Cap Screw
- Hot Dip Galvanized Hex Bolt
- Hot Dip Galvanized Allen Cap Bolt
- ASME B18.2.1 Hot Dip Galvanized Double Ended Studs Stockists
- Hot Dip Galvanized Fasteners Supplier in Mumbai
- Hot Dip Galvanized Stud
- Hot Dip Galvanized Washers
- HDG Hex Bolts
- HDG Threaded Rod
- Hot Dip Galvanized Tie Bars
- Hot Dip Galvanized Heavy Hex Bolts
- Hot Dip Galvanized Fasteners
- HDG High Temperature Stud Bolts
- ASTM B18.3 Bolts
- Hot Dip Galvanized Self Tapping Screws
- Hot Dip Galvanized Flat Washers
- Hot Dip Galvanized Machine Bolts
- Hot Dip Galvanized Studs
- Hot Dip Galvanized Spring Washers
- Hot Dip Galvanized Square Head Bolts Supplier
- HDG Single End Stud Bolts Price List
- HDG Screw
- Hot Dip Galvanized Ogee Washers
- Hot Dip Galvanized Countersunk Washer
- HDG Socket Head Cap Screw
- Hot Dip Galvanized Spring Washers
- Hot Dip Galvanized Foundation Bolts
- Hot Dip Galvanized Bolts
- ASTM B18.3 Full Threaded Stud Bolts Supplier
- Hot Dip Galvanized Industrial Fastener
Hot Dip Galvanized Fasteners Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay
