6A Gost Flange Manufacturer, DIN-PN16 Steel Gost 12820-80 Flange, Raised Face Gost 12820-80 PN 10 Flange, Gost 12820-80 Flange, ГОСТ 33259:2015 Flange, Duplex Steel Raised Face Gost 12820-80 Flange Suppliers in India.
Victor Steel Corporation is a standard exporter and trader of GOST/ГОСТ 33259:2015/12820-80 Pipe Flanges, whichare commonly thru hardened, now no longer surface dealt with. Quenching and tempering offer the most beneficial aggregate of mechanical properties and durability available from metal. Alloying factors are brought to extrude mechanical or physical properties. Super Duplex Steel GOST/ГОСТ 33259:2015/12820-80 Slip OnFlangesis reserved for the ones steels that comprise a modest quantity of alloying factors and that typically depend upon thermal remedy to increase specific properties.They are warmth dealt with through quenching and tempering and are used while most hardness and strength need to amplify deep inside a component. Grain length also can be a vital thing of the microstructure. Toughness of fine-grained steels is commonly more than that of coarse-grained steels.
Nickel Alloy Gost PN 10 Plate Flange Dealer, Stainless Steel ГОСТ 33259:2015 Flange, Carbon Steel Gost 12820-80 Flange, SS Gost 12820-80 Flanges, Alloy Steel Gost 12820-80 Flange, JIS 5K Gost 12820-80 Flange, Hastelloy Gost 12820-80 Raised Face Flange, Gost 12820-80 Flange, Inconel Raised Face Gost 12820-80 Flange, Class 150 Alloy Steel GOST Standard 12820-80 Flange Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For GOST/ГОСТ 33259:2015/12820-80 Flange
- Material Grades of GOST/ГОСТ 33259:2015/12820-80 Flange
- Keep Bulk Stock Of GOST/ГОСТ 33259:2015/12820-80 Flange
- GOST/ГОСТ 33259:2015/12820-80 Flange Export to below Mentioned Countries
- GOST/ГОСТ 33259:2015/12820-80 Flange Application Area
Inconel Alloy GOST/ГОСТ 33259:2015/12820-80 Socket Weld Flanges are used in which a difficult center and comparatively shallow, hard surface are needed. After a surface-hardening remedy inclusive of carburizing (or nitriding), these steels are appropriate for components that need to face up to put on in addition to excessive stresses. Carbon content material and alloying factors impact the general traits of alloy. Maximum attainable surface hardness relies upon frequently on carbon content material. Maximum hardness and strength in small sections grows as carbon content material increases. However, carbon contents can growth the opportunity of cracking at some point of quenching or welding. Alloying factors frequently impact hardenability.
Monel Alloy GOST/ГОСТ 33259:2015/12820-80 Forged Flanges additionally impact different mechanical and fabrication properties which includes durability and machinability.Lead additions (appreciably enhance machinability of alloy steels through excessive-velocity device steels. For machining with carbide tools, calcium-dealt with steels are said to double or triple device existence similarly to improving surface finish.Few genuine regulations exist for choosing thru-hardening or surface-hardening grades of alloy steels. In maximum cases, vital components are subject examined to assess their performance. Parts with huge sections — heavy forgings, for example — are regularly crafted from alloy steels which have been vacuum degassed. While in a molten state, these steels are uncovered to a vacuum which eliminates hydrogen and, to a lesser degree, oxygen and nitrogen.
Specification Chart of GOST/ГОСТ 33259:2015/12820-80 Flange
Specifications | GOST/ГОСТ 33259:2015/12820-80 Flanges |
---|---|
Size | ½" (15 NB) to 48" (1200NB). |
Dimension Standard | ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings |
Class / Pressure Rating | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc. |
DIN | DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673 |
BS | BS4504 , BS4504, BS1560, BS10 |
Flange Face Type | Flate Face (FF), Raised Face (RF), ANSI B16.5 (RTJ) |
Testing and Documents | Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports |
Packing | Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests |
Check GOST/ГОСТ 33259:2015/12820-80 Flange, Stainless Steel ГОСТ 33259:2015 Flange, JIS 5K Gost 12820-80 Flange, Class 150 Alloy Steel GOST Standard 12820-80 Flange Manufacturer India, View Updated Gost 12820-80 Flange Price List In India.
Material Grades of GOST/ГОСТ 33259:2015/12820-80 Flange
Stainless Steel GOST/ГОСТ 33259:2015/12820-80 Flange | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
Carbon Steel GOST/ГОСТ 33259:2015/12820-80 Flange | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
Alloy Steel GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
Titanium GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
Copper GOST/ГОСТ 33259:2015/12820-80 Flanges | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
Copper Nickel GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
Inconel GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 ANSI B16.5 Class 150 ANSI B16.5 Flanges |
Hastelloy GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
Monel GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
Alloy 20 GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
Aluminium GOST/ГОСТ 33259:2015/12820-80 Flanges | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
Nickel Alloy GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
Duplex Steel GOST/ГОСТ 33259:2015/12820-80 Flanges | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Super Duplex GOST/ГОСТ 33259:2015/12820-80 Flanges | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Incoloy GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
254 SMO GOST/ГОСТ 33259:2015/12820-80 Flanges | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
Nimonic GOST/ГОСТ 33259:2015/12820-80 Flanges | Nimonic 75, Nimonic 80A, Nimonic 90 |
Brass GOST/ГОСТ 33259:2015/12820-80 Flanges | 3602 / 2604 / H59 / H62 / etc. |
Other GOST/ГОСТ 33259:2015/12820-80 Flanges material | Tin bronze, Alumunum bronze, Lead bronze |
Keep Bulk Stock Of GOST/ГОСТ 33259:2015/12820-80 Flange
- Class D Raised Face Gost 12820-80 Flange Supplier
- Gost 12820-80 Flanges Class 400
- Inconel ГОСТ 33259:2015 Flange Supplier in Mumbai
- Gost 12820-80 PN 10 Flange
- DIN Standard PN25 Gost 12820-80 Flanges
- Gost 12820-80 Flanges
- Alloy 20 Gost Plate Flanges Stockist
- Gost 12820-80 PN 10 Class 1500 Flange
- Brass Gost 12820-80 Raised Face Flanges
- Hastelloy Raised Face Gost 12820-80 Flanges Stockist
- Class D Raised Face Gost 12820-80 Flanges
- Gost 12820-80 Plate Flanges
- ANSI #150 Gost 12820-80 Flanges
- 1/2 GOST Standard 12820-80 Flanges
- DIN 2605 Gost Flanges Supplier
- Gost 12820-80 PN 10 Flanges Manufacturer
- Gost 12820-80 Flange Class 400
- Duplex Steel 2205 Gost 12820-80 Flange Manufacturer in Mumbai, India
- Class 75 Gost 12820-80 Plate Flange
- High Quality Gost 12820-80 Flanges
- EN 1092-1 Gost 12820-80 Flange
- Large Diameter Gost 12820-80 Flange Exporter
- ГОСТ 33259:2015 Flange
- Titanium Gost 12820-80 Flanges Price List
- 5K 10K 16K Gost 12820-80 PN 10 Flanges
- Super Duplex 2507 Gost 12820-80 Flanges
- 6A Gost 12820-80 Flange
- 254 SMO Gost 12820-80 Flange
- Copper Nickel Raised Face Gost 12820-80 Flange
- Class 600 Gost 12820-80 Flange
- Copper Nickel Gost 12820-80 Flanges
- High Nickel Alloy Series A and B RTJ Gost 12820-80 Flange
- Gost 12820-80 PN 10 Flange
- Gost 12820-80 Inch Flanges
- Brass Gost 12820-80 Flange
- A182 GOST Standard 12820-80 Raised Face Flanges
- Monel Raised Face Gost 12820-80 Flange
- Titanium Gost 12820-80 Flange
- Carbon Steel Gost 12820-80 Flanges
GOST/ГОСТ 33259:2015/12820-80 Flange Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay