Alloy Steel A234 WP9 Elbow, ASTM A234 Chrome Moly WP9 Buttweld Pipe Fittings Manufacturer, ANSI B16.9 Chrome Moly WP9 Short Radius Elbow, Alloy Steel A234 WP9 Buttweld Fittings, Cr-Mo WP9 90 Deg. Elbow Suppliers in India.
Victor Steel Corporation is a known manufacturer and supplier of AS A234 WP9 Pipe Fittings, which is an alloy with first rate corrosion resistance in extreme environments. Alloy Steel ASTM A234 WP9 Elbow Pipe Fittings is likewise one of the few materials to be had which can face up to moist chlorine fueloline, chlorine dioxide and hypochlorite. Because of its durability, thermal balance and dependable overall performance, these alloys are extensively used for diverse chemical processing applications and others that require excessive corrosion resistance. ASTM A234 WP9 steel pipe fittings mean the pipe fittings which material is ASTM A234 WP9,they are used for the pressure piping systems of moderate and high temperature services.
Chromium Molybdenum WP9 Pipe Fittings, Chrome Moly WP9 Pipe Cap, Alloy Steel WP9 Stub End, WP9 Alloy Steel LR Elbow, Alloy Steel WP9 Equal Tee, Alloy Steel A234 WP9 Cross Manufacturer, ASTM A234 WP9 Alloy Steel Two Joint Pipe Fittings, Cr-Mo WP9 Reducer in Mumbai, India.
Table of Contents
- Standard Specification For Alloy Steel A234 WP9 Pipe Fittings
- Different Forms of Alloy Steel A234 WP9 Butt weld Fittings
- Alloy Steel A234 WP9 Pipe Fittings Manufacturing Standards
- Chemical Composition Of Alloy Steel A234 WP9 Butt weld Fittings
- Mechanical Properties Of Alloy Steel A234 WP9 Pipe Fittings
- ASTM A234 CRMO WP9 Buttweld Fittings
- ASME B16.9 Alloy Steel WP9 Short and Long Radius Elbows Dimensions
- A234 WP9 Alloy Steel Buttweld Fittings Weights(Kg)
- Keep Bulk Stock Of Alloy Steel A234 WP9 Buttweld Fittings
- Alloy Steel A234 WP9 Buttweld Pipe Fittings Export to below Mentioned Countries
- Alloy Steel A234 WP9 Pipe Fittings Application Area
Typically, these SA234 Gr WP9 Fittings are meant for use in pressure piping as well as in pressure vessel fabrication for service at moderate and elevated temperatures. ASTM A234 Alloy Steel WP9 Long Radius Elbow Pipe Fittings is easily formed, fabricated and welded and taken into consideration one of the maximum flexible nickel alloys available. This alloy especially is used for a number of welding applications consisting of weld overlay or cladding of steels and as soon as welded, is appropriate for nearly any chemical system utility in even the maximum extreme environments. ASME SA 234 Alloy Steel WP9 Short Radius Elbow Pipe Fittings affords resistance to preferred corrosion, pitting, crevice corrosion, intergranular attack, and pressure corrosion cracking.The alloy is formed with the aid of using fueloline tungsten-arc, fueloline metallic-arc, and shielded metallic-arc processes. We are a manufacturer, supplier and exporter of Alloy Steel ASTM A234 WP9 Buttweld Fittings that form meaningful connections between multiple pipes of various sizes.
Standard Specification For Alloy Steel A234 WP9 Pipe Fittings
Specifications | ASTM A234/ ASME SA234 |
---|---|
Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Size | Seamless Fittings : 1/2" - 10" Welded Fittings : 1/2" - 48" |
Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) |
Connection | Welding |
Manufacturing Process | Push, Press, Forge, Cast, etc. |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Specialized Manufacturer of | 90 Deg. Elbows, 45 Deg. Elbow, Tee, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
Check Alloy Steel A234 WP9 Pipe Fittings Tolerance, 2" 3/4" sch 40 Schedule 80 Alloy Steel A234 WP9 Equal Tee, Alloy Steel A234 WP9 Buttweld Cross Manufacturer India, View Updated Alloy Steel A234 WP9 Butt weld Fittings Price List In India.
Different Forms of Alloy Steel A234 WP9 Butt weld Fittings
Alloy Steel A234 WP9 Pipe Fittings Manufacturing Standards
ASTM A234/A234M | Alloy Steel Piping Fittings |
---|---|
ASME B16.9 | Factory-Made Wrought Fittings Buttwelding |
MSS SP-43 | Wrought & Fabricated Butt-Welding Fitting for Low Pressure, Corrosion Resistant Applications |
BS3799 – | Specification for pipe fittings, Socket-welding and threaded/screwed fitting for the petroleum industry |
ASTM A234 – ASME SA234 | Standard Specification for Wrought Austenitic SS Piping Fitting |
ASME Standard | ASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43 |
DIN Standard | DIN28011, DIN2617, DIN2616, DIN2615, DIN2605 |
EN Standard | EN10253-2, EN10253-1 |
ASME B16.25 | Buttwelding Ends |
ASME B16.28 | Wrought Steel SR Elbows and Buttwelding Returns |
API 590-605 ASME B16.9 |
‘Factory-Made Wrought Butt-welding Fittings’ |
Chemical Composition Of Alloy Steel A234 WP9 Butt weld Fittings
Grade | C | Mn | Si | S | P | Cr | Mo |
---|---|---|---|---|---|---|---|
A234 WP9 | ≤0.15 | ≤0.6 | 1.00 | ≤0.03 | ≤0.03 | 8-10 | 0.90-1.10 |
Mechanical Properties Of Alloy Steel A234 WP9 Pipe Fittings
Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
---|---|---|---|
A234 WP9 | 380 min | 585 min | ≥30 |
ASTM A234 CRMO WP9 Buttweld Fittings
Seamless/ Welded 100% Radiography Tested | ||
Products | Size | |
ASTM A234 CRMO WP9 Elbow – Long Radius | ASTM A234 CRMO WP9 45° Elbow | Sizes 1/2″ – 48″ |
ASTM A234 CRMO WP9 Elbow – Short Radius | ASTM A234 CRMO WP9 Cross | |
ASTM A234 CRMO WP9 3D Elbow | ASTM A234 CRMO WP9 5D Elbow | |
ASTM A234 CRMO WP9 Stub End | ASTM A234 CRMO WP9 Pipe Bend | |
ASTM A234 CRMO WP9 Fabricated Tee | ASTM A234 CRMO WP9 End Cap | |
ASTM A234 CRMO WP9 Reducer | ASTM A234 CRMO WP9 Tee | |
ASTM A234 CRMO WP9 Reducing Elbow | ASTM A234 CRMO WP9 Pipe Nipple | |
ASTM A234 CRMO WP9 Reducing Cross | ASTM A234 CRMO WP9 Eccentric Reducer | |
ASTM A234 CRMO WP9 Concentric Reducer | ASTM A234 CRMO WP9 Welded Fittings |
ASME B16.9 Alloy Steel WP9 Short and Long Radius Elbows Dimensions
Nominal Pipe Size (inches) |
Outside Diameter | 45°Elbows | 90° Elbows | 180° Returns | ||||
Long Radius | Long Radius | Short Radius | Long Radius | |||||
(mm) | (inches) | Center to Face (inches) |
Radius (inches) |
Center to Face (inches) |
Center to Face (inches) |
Center to Center (inches) |
Back to face (inches) |
|
1 | 33.4 | 1.315 | 7/8 | 1 1/2 | 1 | 3 | 2 3/16 | |
1/2 | 21.3 | 0.840 | 5/8 | 1 1/2 | – | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 7/16 | 1 1/8 | – | 2 1/4 | 1 11/16 | |
1 1/4 | 42.2 | 1.660 | 1 | 1 7/8 | 1 1/4 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 1 1/8 | 3 | 2 1/4 | 1 1/2 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 1 3/8 | 4 | 3 | 2 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 1 3/4 | 5 | 3 3/4 | 2 1/2 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 2 | 6 | 4 1/2 | 3 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 2 1/4 | 7 | 5 1/4 | 3 1/2 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 2 1/2 | 8 | 6 | 4 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 3 1/8 | 10 | 7 1/2 | 5 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 3 3/4 | 12 | 9 | 6 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 5 | 12 | 12 | 8 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 6 1/4 | 15 | 15 | 10 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 7 1/2 | 18 | 18 | 12 | 36 | 24 3/8 |
ASME B16.9 Alloy Steel A234 WP9 Tee & Cap Dimensions
Nominal Pipe Size (inches) |
Outside Diameter |
Caps | Straight Crosses | Straight Tees | Stub Ends | |||
(mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
|
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1/2 | 21.3 | 0.840 | 1 | – | 1 | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | – | 1 1/8 | 1 11/16 | 3 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
ASME B16.9 Alloy Steel WP9 Concentric & Eccentric Reducer Dimensions
Nominal Pipe Size |
Outside Diameter | Reducers | ||
Reduced from (inches) |
(mm) | (inches) | Reduced to (inches) | Concentric & Eccentric Length (inches) |
1 | 33.4 | 1.315 | 3/8 | 2 |
1/2 | 2 | |||
3/4 | 2 | |||
1/2 | 21.3 | 0.840 | 1/4 | 1 1/2 |
3/8 | 1 1/2 | |||
3/4 | 26.7 | 1.050 | 3/8 | 2 |
1/2 | 2 | |||
1 1/4 | 42.2 | 1.660 | 1/2 | 2 |
3/4 | 2 | |||
1 | 2 | |||
1 1/2 | 48.3 | 1.900 | 1/2 | 2 1/2 |
3/4 | 2 1/2 | |||
1 | 2 1/2 | |||
1 1/4 | 2 1/2 | |||
2 | 60.3 | 2.375 | 3/4 | 3 |
1 | 3 | |||
1 1/4 | 3 | |||
1 1/2 | 3 | |||
2 1/2 | 73.0 | 2.875 | 1 | 3 1/2 |
1 1/4 | 3 1/2 | |||
1 1/2 | 3 1/2 | |||
2 | 3 1/2 | |||
3 | 88.9 | 3.500 | 1 | 3 1/2 |
1 1/2 | 3 1/2 | |||
2 | 3 1/2 | |||
2 1/2 | 3 1/2 | |||
3 1/2 | 101.6 | 4.000 | 1 1/4 | 4 |
1 1/2 | 4 | |||
2 | 4 | |||
2 1/2 | 4 | |||
3 | 4 | |||
4 | 114.3 | 4.500 | 1 1/2 | 4 |
2 | 4 | |||
2 1/2 | 4 | |||
3 | 4 | |||
3 1/2 | 4 | |||
5 | 141.3 | 5.563 | 2 | 5 |
2 1/2 | 5 | |||
3 | 5 | |||
3 1/2 | 5 | |||
4 | 5 | |||
6 | 168.3 | 6.625 | 2 1/2 | 5 1/2 |
3 | 5 1/2 | |||
3 1/2 | 5 1/2 | |||
4 | 5 1/2 | |||
5 | 5 1/2 | |||
8 | 219.1 | 8.625 | 3 | 6 |
3 1/2 | 6 | |||
4 | 6 | |||
5 | 6 | |||
6 | 6 | |||
10 | 273.1 | 10.750 | 4 | 7 |
5 | 7 | |||
6 | 7 | |||
8 | 7 | |||
12 | 323.9 | 12.750 | 5 | 8 |
6 | 8 | |||
8 | 8 | |||
10 | 8 |
A234 WP9 Alloy Steel Buttweld Fittings Weights(Kg)
Product range and theoretical weights (kg) | |||||||||
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Product range and theoretical weights (kg) | |||||||||
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Keep Bulk Stock Of Alloy Steel A234 WP9 Buttweld Fittings
- Chrome Moly WP9 Two Joint Pipe Fittings
- Cr-Mo WP9 SR Elbow
- Alloy Steel A234 WP9 Elbow
- ASME B16.9 Alloy Steel A234 WP9 Long Radius Bend
- A234 WP9 Alloy Steel LR Elbow Supplier
- Sch 80 Alloy Steel WP9 Piggable Bend
- Cr-Mo WP9 Tee
- Alloy Steel A234 WP9 Butt weld Pipe Fittings
- Cr-Mo WP9 Seamless Pipe Fittings
- ASME SA234 WP9 Alloy Steel Butt weld Elbow
- A234 WP9 Alloy Steel 45 deg. Elbow
- A234 WP9 Alloy Steel Industrial Pipe Fittings
- Alloy Steel WP9 End Pipe Cap
- ASTM A234 CRMO WP9 Two Halve Butt weld Fittings
- A234 WP9 Alloy Steel LR Return Bend
- Cr-Mo WP9 Barrel Nipple Stockists
- Chromium Molybdenum WP9 Supplier in Mumbai
- Alloy Steel A234 WP9 Stub End
- Alloy Steel WP9 Weld Fittings
- ASTM A234 Alloy Steel WP9 Buttweld Reducing Nipple
- Cr-Mo WP9 Short Stub End
- Schedule 80 Cr-Mo WP9 Grade Buttweld Fittings
- Cr-Mo WP9 3D Elbow
- SCH 60 WP9 Alloy Steel Pipe Fittings Manufacturer
- ASTM A234 CRMO WP9 Return Bends
- Alloy Steel A234 WP9 5D Elbow
- A234 WP9 Alloy Steel Butt weld Pipe Fittings
- ASTM A234 CRMO WP9 Straight Tees
- ASME B16.9 Schedule 10 A234 WP9 Alloy Steel Equal Cross Supplier
- Alloy Steel A234 WP9 Buttweld Reducer
- A234 WP9 Alloy Steel Caps Manufacturer in Mumbai, India
- ASTM A234 CRMO WP9 Concentric Reducer
- Chromium Molybdenum WP9 Pipe Nipple
- Alloy Steel WP9 Reducers
- ANSI B16.9 Alloy Steel WP9 Pipe Elbow
- Cr-Mo WP9 5D Elbow
- Wrought Austenitic Cr-Mo WP9
- CrMo WP9 90 Degree Buttweld Elbow
- CrMo WP9 Equal Cross
- Chrome Moly WP9 Long Stub End Exporter
- A234 WP9 Alloy Steel Eccentric Reducer
- Alloy Steel A234 WP9 Buttweld Fittings Price List
- DIN 2605 Alloy Steel WP9 Butt weld Fittings
- Alloy Steel WP9 180 Degree Elbow
- Cr-Mo WP9 Short Radius Elbow
Alloy Steel A234 WP9 Buttweld Pipe Fittings Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay