DIN 2.4660 Tap End Stud Bolts, Incoloy Alloy 20 Studs Manufacturer, Carpenter 20 Double End Stud Bolts, Alloy 20 Stud Bolts, UNS N08020 Stud Bolts Suppliers in India.
Victor Steel Corporation is a prominent supplier and manufacturer of Alloy 20 Stud Bolts, which is available in exceptional dimensions and shapes for our esteemed clients. In mildly corrosive environments at everyday ambient temperatures, the corrosion resistance of this UNS N08020 Stud Bolts isn’t very exceptional. Annealing may be completed to this product for hardening, in which warmth as much as 400 Degree F - 900 Degree F (260 Degree C - 482 Degree C) after which air cool. This product has an oxidation weight advantage of 10 mg / cm 2 in 1,000 hours, in temperatures over 1600 Degree F (871 Degree C).
Alloy 20 End Stud Bolts, 2.4660 Stud, ALLOY 20CB-3® Threaded Rod, Incoloy® Alloy 20 Stud Bolts, UNS N08020 Single End Stud Bolt, EN NiCr20CuMo Stud Bolt, Incoloy Alloy 20 Tie Rods, Carpenter 20Cb-3® Half Thread Stud Bolts, Alloy 20 Full Threaded Stud Bolt, 20 Alloy Stud Manufacturer in Mumbai, India.
Table of Contents
- Standard Specification For Alloy 20 Stud Bolts
- Different Forms of Alloy 20 Stud Bolts
- Equivalent Grade Chart Of Alloy 20 Stud Bolts
- Chemical Composition Of Alloy 20 Stud Bolts
- Mechanical Properties Of Alloy 20 Stud Bolts
- Size Chart Of Alloy 20 Stud Bolt
- Weight Chart Of Alloy 20 Stud Bolt
- Keep Bulk Stock Of Alloy 20 Stud Bolts
- Alloy 20 Stud Bolts Export to below Mentioned Countries
- Alloy 20 Stud Bolts Application Area
These WNR 2.4660 Stud Bolts is an austenitic chrome steel with a nominal composition of chromium and nickel. Due to its excessive work hardening rate on this alloy, intermediate annealing can be vital for excessive drawing and forming operations. Generally speaking, this Alloy 20Cb3 Stud Bolts have a tendency to be a touch much less corrosion resistant due to the fact the alloy has decrease chromium content material and a better degree of carbon. This alloy well-known shows top oxidation resistance for intermittent offerings as much as 840 Degree C and for non-stop carrier as much as 900 Degree C.
Standard Specification For Alloy 20 Stud Bolts
Specification | ASTM F468, B473 / ASME SF468, SB473 |
---|---|
Size | M02 to M33, Custom Sizes |
Length | 3 mm to 200 mm |
Stud Bolt | UNF, BSW, BSF, METRIC, UNC, or as required |
Standard | DIN 525, DIN 835, DIN 938, DIN 939, DIN 940, DIN 949-1, DIN 949-2, DIN 975, DIN 976, DIN 2509, BS 2693, BS 3692, BS 4439, IS 1862, IS 13178, ANSI/ASME B18.31.2, ANSI/ASME B16.5 |
Form | Hex, Threading, Square, Round as per Gauge Etc. |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Types | Reduced Shank, Stud Bolts with Reduced Shank, Tap End Stud Bolts, Fully Threaded Stud Bolts, Weld Studs, Double End Stud Bolts, Stud Bolts, Flange Stud Bolts |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
Head drive | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
Surface Coating | Ptfe Coated Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Check Alloy 20 Stud Bolts From 3/4 Dia X 140 MM Diameter, M3 to M56 Alloy 20 Threaded Rod, Incoloy Alloy 20 Stud Manufacturer India, View Updated Alloy 20 Double Ended Stud Bolt & Single End Stud Bolt Price List In India.
Different Forms of Alloy 20 Stud Bolts
Equivalent Grade Chart Of Alloy 20 Stud Bolts
STANDARD | UNS | WERKSTOFF NR. | EN | AFNOR |
Alloy 20 | N08020 | 2.4660 | NiCr20CuMo | Z2NCUD31-20AZ |
Chemical Composition Of Alloy 20 Stud Bolts
Grade | C | Mn | Si | S | Cu | Ni | Cr | Fe | Mo | P |
Alloy 20 | 0.07 max | 2.00 max | 1.00 max | 0.035 max | 3.00 – 4.00 | 32.00 – 38.00 | 19.00 – 21.00 | 29.85 min* | 2.00 – 3.00 | 0.045 max |
Mechanical Properties Of Alloy 20 Stud Bolts
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Alloy 20 | 8.1 g/cm3 | 1443 °C (2430 °F) | Psi -80,000, MPa -551 | Psi - 35,000, MPa - 241 | 30 % |
Size Chart Of Alloy 20 Stud Bolt
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
Weight Chart Of Alloy 20 Stud Bolt
Weight Imperial | |||||||||||||
STUD BOLT LENGTH (in inches) | 1/2 | 5/8 | 3/4 | 7/8 | 1 | 1 1/8 | 1 1/4 | 1.3/8 | 1 1/2 | 1.5/8 | 1.3/4 | 1 7/8 | |
2.1/2 | 10.8 | ||||||||||||
2.3/4 | 11.6 | 19.8 | |||||||||||
3.1/4 | 12.4 | 21 | 32.4 | ||||||||||
3.1/2 | 13.2 | 22.2 | 34.3 | 50 | |||||||||
4 | 14 | 23.4 | 36.2 | 52.6 | 71.8 | ||||||||
4.1/2 | 14.8 | 24.6 | 38.1 | 55.2 | 75.2 | 102 | |||||||
4.3/4 | 15.6 | 25.8 | 40 | 57.8 | 78.6 | 106 | 137 | ||||||
5 | 16.4 | 27 | 41.9 | 60.4 | 82 | 111 | 142 | 179 | |||||
5.1/2 | 17.2 | 28.2 | 43.8 | 63 | 85.4 | 115 | 147 | 186 | 234 | ||||
6 | 18 | 29.4 | 45.7 | 65.6 | 88.8 | 119 | 153 | 193 | 242 | 289 | |||
6.1/4 | 18.8 | 30.6 | 47.6 | 68.2 | 92.2 | 123 | 158 | 200 | 250 | 298 | 263 | ||
6.1/2 | 19.6 | 32.3 | 49.5 | 70.8 | 95.6 | 128 | 164 | 206 | 258 | 308 | 374 | 437 | |
7 | 20.4 | 33.5 | 50.8 | 73.4 | 99 | 132 | 169 | 213 | 266 | 317 | 385 | 449 | |
7.1/2 | 21.2 | 34.8 | 52.7 | 75.5 | 103 | 136 | 174 | 220 | 275 | 326 | 396 | 462 | |
8 | 22 | 36.1 | 54.5 | 78 | 106 | 141 | 180 | 226 | 283 | 336 | 407 | 475 | |
8.1/4 | 37.3 | 56.3 | 80.5 | 108 | 145 | 185 | 233 | 291 | 345 | 418 | 488 | ||
8.3/4 | 38.6 | 58.1 | 83.1 | 112 | 149 | 191 | 240 | 299 | 354 | 429 | 500 | ||
9 | 39.8 | 60 | 85.6 | 115 | 153 | 196 | 246 | 307 | 364 | 440 | 513 | ||
9.1/2 | 41.1 | 61.8 | 88.2 | 118 | 158 | 201 | 253 | 316 | 373 | 451 | 526 | ||
10 | 63.7 | 90.7 | 122 | 162 | 206 | 260 | 324 | 382 | 463 | 538 | |||
10/1.4 | 93.3 | 125 | 166 | 212 | 267 | 332 | 391 | 474 | 551 | ||||
1.0.1/2 | 128 | 171 | 217 | 273 | 340 | 401 | 485 | 564 | |||||
11 | 132 | 175 | 223 | 279 | 345 | 410 | 496 | 576 | |||||
11.1/2 | 135 | 179 | 228 | 285 | 350 | 419 | 507 | 589 | |||||
12 | 138 | 184 | 233 | 292 | 358 | 429 | 518 | 602 | |||||
Weight Of Metric Studs Bolt | |||||||||||||
STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 |
60 | 5,6 | 8,1 | 12 | 15,6 | |||||||||
70 | 6,1 | 8,9 | 13 | 16,9 | 23,7 | ||||||||
80 | 6,6 | 9,6 | 14 | 18,2 | 25,4 | 32,5 | |||||||
90 | 7,1 | 10,3 | 15 | 19,6 | 27,1 | 34,5 | 45,5 | ||||||
100 | 7,6 | 11 | 16 | 21 | 28,8 | 36,7 | 47,2 | 54,2 | |||||
110 | 8,1 | 11,7 | 17 | 22,2 | 30,4 | 38,7 | 48,3 | 58,2 | 80 | ||||
120 | 8,6 | 12,4 | 18 | 23,6 | 32,1 | 40,7 | 50,9 | 60,2 | 84,7 | 107 | |||
130 | 9,1 | 13,2 | 19 | 24,9 | 33,7 | 42,8 | 53,4 | 63,2 | 88,6 | 111 | 141 | ||
140 | 9,6 | 14,2 | 20 | 26,2 | 35,4 | 44,9 | 55,9 | 66,2 | 92,4 | 116 | 147 | 185 | |
150 | 10,1 | 14,9 | 20,8 | 27,5 | 36,9 | 46,9 | 58,5 | 69,2 | 96,3 | 121 | 153 | 192 | 237 |
160 | 10,6 | 15,6 | 21,8 | 29,1 | 38,6 | 49 | 61 | 72,2 | 100,1 | 126 | 159 | 199 | 245 |
170 | 16,4 | 22,8 | 30,4 | 40,2 | 51,1 | 63,5 | 75,2 | 104 | 130 | 165 | 206 | 253 | |
180 | 23,8 | 31,8 | 41,9 | 52,3 | 66,1 | 78,1 | 108 | 135 | 171 | 213 | 261 | ||
190 | 33,1 | 43,5 | 54,4 | 68,4 | 81,1 | 112 | 140 | 176 | 219 | 269 | |||
200 | 34,5 | 45,2 | 56,2 | 71 | 84 | 116 | 144 | 182 | 226 | 278 | |||
210 | 35,8 | 46,8 | 58,5 | 73,5 | 88,4 | 120 | 149 | 188 | 233 | 286 | |||
220 | 37,1 | 48,4 | 60,6 | 76,1 | 91,4 | 124 | 154 | 194 | 240 | 294 | |||
230 | 38,5 | 50,1 | 62,6 | 78,6 | 94,4 | 127 | 159 | 201 | 247 | 302 | |||
240 | 39,8 | 51,7 | 64,7 | 81,2 | 97,4 | 130,9 | 164 | 208 | 253 | 310 | |||
250 | 41,1 | 53,4 | 66,8 | 83,7 | 100,4 | 134,8 | 172 | 214 | 260 | 319 | |||
260 | 55 | 68,8 | 86,3 | 103,4 | 138,6 | 177 | 220 | 267 | 327 | ||||
270 | 56,6 | 70,9 | 88,8 | 106,4 | 142,5 | 182 | 224 | 274 | 335 | ||||
280 | 58,3 | 73 | 91,4 | 109,4 | 146,3 | 187 | 230 | 281 | 343 | ||||
290 | 75 | 93,9 | 112,4 | 150,1 | 192 | 236 | 291 | 360 | |||||
300 | 77,1 | 96,5 | 115,4 | 154 | 196 | 241 | 298 | 368 | |||||
320 | 101,6 | 121,3 | 161,7 | 206 | 253 | 312 | 380 | ||||||
340 | 127,3 | 169,4 | 215 | 265 | 326 | 395 | |||||||
360 | 133,3 | 177,1 | 224 | 276 | 340 | 411 | |||||||
380 | 184,8 | 234 | 288 | 353 | 428 | ||||||||
400 | 192,5 | 243 | 299 | 367 | 444 | ||||||||
420 | 252 | 311 | 381 | 460 | |||||||||
440 | 262 | 322 | 394 | 477 | |||||||||
460 | 271 | 334 | 408 | 493 | |||||||||
480 | 281 | 345 | 422 | 509 | |||||||||
500 | 290 | 357 | 436 | 526 |
Keep Bulk Stock Of Alloy 20 Stud Bolt
- ASTM B473 Alloy 20 Threaded Rod
- Incoloy Alloy 20 Weld Studs
- UNS N08020 Heavy Stud Bolt Stockists
- Alloy 20 Double End Stud Bolts
- 2.4660 Stud Supplier
- Incoloy® Alloy 20 Threaded Stud Bolts
- Alloy 20 Single End Stud Bolt
- ALLOY 20CB-3® Studs
- Incoloy Alloy 20 Continuous Thread Stud Bolt
- Alloy 20 Stud Bolts
- Carpenter 20 Metric Thread Stud Bolt
- ASTM B473 Alloy 20 Studs
- 20 Alloy Continuous Thread Stud Bolt
- EN NiCr20CuMo Tap End Stud Bolts
- Incoloy® Alloy 20 Half Thread Stud Bolt
- UNS N08020 Stud Bolt Supplier in Mumbai
- Incoloy Alloy 20 Full Threaded Stud Bolt
- 20 Alloy Flush Head Studs
- UNS N08020 Double Ended Stud
- 20 Alloy Stud Bolt in Mumbai, India
- Incoloy® Alloy 20 Threaded Studs
- Alloy 20 Stud Bolts With Reduced Shank
- 2.4660 Stud Bolt
- Alloy 20 Stud Bolt Manufacturer
- Carpenter 20Cb-3® Stud Bolts Supplier
- 20 Alloy M16 Stud Bolt Exporter
- Alloy 20 Tie Bars
- UNS N08020 Continuous Thread Stud Bolt
- 2.4660 Industrial Bolts
- DIN 2.4660 High Pressure Stud Bolt
- ASTM B473 Incoloy Alloy 200 Wheel Lug Stud Bolt
- Incoloy Alloy 20 Drywall Stud
- ASTM B473 Incoloy Alloy 20 Partial Threaded Stud Bolt List
- Alloy 20 Studs Bolts
- EN NiCr20CuMo Studs
- Incoloy® Alloy 20 Industrial Stud Bolts
- Incoloy Alloy 20 Tie Rods
- ALLOY 20CB-3® Threaded Rod
Alloy 20 Stud Bolts Export to below Mentioned Countries
MIDDLE EAST : Saudi Arabia, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus
AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon
NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark
EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta
ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh,Myanmar, Taiwan, Cambodia
SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay